Siedle NG 602-01 DE Manual
PDF manual · 56 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Siedle NG 602-01 DE manual using AI
Get instant AI answers from your Siedle NG 602-01 DE manual
Ask anything about the Siedle NG 602-01 DE. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend NG 602-01 DE?
Yes NoFrequently Asked Questions
It is a DIN-rail power supply for Siedle 1+n audio door communication systems. It supplies the voltages required for door stations, indoor telephones, door release operation, illuminated call buttons, and compatible expansion equipment.
Is this answer helpful?
The unit provides 23.3 V DC at up to 0.3 A and 12 V AC at up to 1.6 A. These outputs support the main operating requirements of compatible Siedle 1+n installations.
Is this answer helpful?
The NG 602-01 occupies 6TE, also called six DIN-rail modules. Its dimensions are 107 x 89 x 60 mm, allowing installation in a standard protected distribution enclosure.
Is this answer helpful?
Yes. It can supply one door opener and up to 50 Siedle Vario LED-illuminated button modules. If the lighting load is higher, an additional TR 603-0 transformer is required.
Is this answer helpful?
Up to eight door stations can be connected in parallel without additional equipment. Their speaker modules synchronize through the TLn terminals, subject to correct system planning and wiring.
Is this answer helpful?
With 0.8 mm cable, the maximum distance from a door station to the most remote indoor telephone is 500 m. The maximum distance from the NG 602-01 to the most remote door station is 100 m.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Provides 23.3 V DC and 12 V AC outputs for core Siedle 1+n door communication functions.
- Compact 6TE DIN-rail design fits neatly into standard electrical distribution boards.
- Supports one door opener and up to 50 illuminated Siedle Vario button modules.
- Function LEDs enable quick operational checks during installation and maintenance.
Disadvantages
- IP20 protection rating limits use to dry, protected indoor distribution areas.
- Larger illuminated button installations require an additional TR 603-0 transformer.
- Installation requires qualified electrical personnel and careful mains-to-system cable separation.
- The 0.3 A DC output may limit designs with high additional DC-powered loads.
Product Specification
Type
Accessory
Dimensions
4.21 x 3.50 x 2.36 in
Features
IP20
Product Description
Siedle NG 602-01 DE Netzgerat, 6TE REG
The Siedle NG 602-01 DE Netzgerat, 6TE REG is a DIN-rail power supply designed for Siedle 1+n door communication systems. It provides the stable electrical foundation needed for door stations, indoor telephones, illuminated call buttons, door release functions, and selected expansion components. Its compact 6-module enclosure makes it a practical choice for installation in a distribution board where space, clear wiring, and dependable operation matter.
Power for reliable door communication
Operating from a 230 V AC mains connection at 50/60 Hz, the NG 602-01 delivers both 23.3 V DC and 12 V AC outputs. The DC output is rated at 0.3 A, while the AC output supplies up to 1.6 A. This combination supports the core requirements of the Siedle 1+n system, including audio communication and power for compatible door hardware.
The unit is intended to supply one door opener and a broad range of illuminated call-button installations. With Siedle Vario button modules, it can power up to 50 LED-illuminated modules. Larger installations may require an additional TR 603-0 transformer. Capacity also depends on the type of door station and the lighting load connected to the system.
Built for structured installations
Measuring 107 x 89 x 60 mm, the NG 602-01 occupies six standard DIN-rail modules. This format helps installers create tidy, serviceable control cabinets for residential buildings, apartments, and small commercial properties. Integrated function LEDs provide a quick visual indication of operation, helping simplify basic status checks.
The power supply supports the flexible architecture of the 1+n platform. Systems can use star, tree, or bus-style wiring, with up to eight door stations connected in parallel without additional equipment. It can also work alongside optional controllers for group calling, internal communication, floor-door stations, switching functions, secure door-release control, and external signaling.
Important planning considerations
The Siedle NG 602-01 is rated IP20 and is intended for protected indoor installation. It operates within an ambient temperature range of 0 C to +40 C. Correct ventilation is essential, and the ventilation openings must remain unobstructed. A qualified electrical professional should install and service the unit, with safe separation maintained between mains wiring and low-voltage system wiring.
For 1+n installations using 0.8 mm cable, the maximum distance between the door station and the most remote indoor telephone is 500 m, while the maximum distance from the power supply to the most remote door station is 100 m. These limits should be considered early in the project to ensure consistent call, speech, and door-opening performance.
Notes
- Use a suitable 12 V AC door opener with at least 20 ohms impedance.
- Protect the 230 V supply with a maximum 16 A fuse in the building installation.
- Add a TR 603-0 transformer when connected lighting demand exceeds the available capacity.
Search for 67,706 Manuals online
Type-in Brand or Model