Siedle BVNG 650-0 DE Manual
PDF manual · 140 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Siedle BVNG 650-0 DE manual using AI
Get instant AI answers from your Siedle BVNG 650-0 DE manual
Ask anything about the Siedle BVNG 650-0 DE. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend BVNG 650-0 DE?
Yes NoFrequently Asked Questions
A single strand can support up to 31 participants. For larger systems, up to 15 strands can be interconnected.
Is this answer helpful?
Yes, CAT network cables can be used, but the maximum length varies based on wire gauge, ranging from 40 to 100 meters depending on the AWG rating.
Is this answer helpful?
You can install the ZBVNG 650-0 accessory card inside the main unit to increase the permissible attenuation and extend the effective range.
Is this answer helpful?
Yes, audio-only devices can be connected using a BAA 650-0 audio coupler which adapts them to the video bus system.
Is this answer helpful?
Only the last device in a monitor branch needs the termination circuit. If devices are daisy-chained, intermediate terminations must be removed.
Is this answer helpful?
It complies with EN 62368-1 and requires a main power switch with at least 3 mm contact opening for safe maintenance.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Supports up to 31 participants per strand with flexible multi-strand expansion
- Enables high-quality video and audio transmission over existing low-voltage cabling
- Compatible with a wide range of Siedle and Jung indoor and outdoor devices
- Allows for parallel door calls and internal intercom communication
- Includes programmable relay contacts for lighting and door unlocking
Disadvantages
- Requires separate cabling for camera and monitor strands to avoid interference
- Signal range is limited to 150 meters without additional signal boosters
- Complex multi-strand setups require precise address configuration for each unit
- Initial installation cost is higher due to specialized hardware requirements
- Maintenance requires specific knowledge of bus topology and attenuation values
Product Specification
Type
Accessory
Topology
Bus
Dimensions
6.38x3.50x2.36 in
Features
IP30
Product Description
Siedle BVNG 650-0 DE Bus-Video Power Supply: The Heart of Your Communication System
The Siedle BVNG 650-0 DE Bus-Video Power Supply, 9TE REG stands as the central control unit for advanced In-Home-Bus video installations. This device acts as the nerve center, managing all communication between door stations and indoor units within a residential or commercial building. It facilitates not only audio conversations but also high-quality video transmission, allowing residents to see and speak with visitors from the comfort of their homes.
This power supply supports both single-strand and multi-strand system configurations, offering great flexibility for various building sizes. In a standard setup, it can manage up to 31 participants on a single strand. For larger complexes, multiple strands can be interconnected to support up to 15 separate lines, ensuring that even large apartment blocks or office buildings maintain reliable connectivity. The device features distinct terminals for camera strands and monitor strands, ensuring clean signal separation and optimal performance.
Installation requires careful attention to cable types and lengths. Using J-Y(St)Y cables allows for maximum reach of 150 meters in both camera and monitor branches. When using YR cables, the range is slightly reduced to 100 meters. The system includes built-in mechanisms to handle signal attenuation, though additional accessories like the ZBVNG 650-0 may be required for very long runs or complex topologies to boost signal strength. Safety is paramount, with strict guidelines regarding voltage isolation and professional installation by qualified electricians.
Beyond basic calling functions, the BVNG 650-0 enables sophisticated features such as parallel door calls, internal intercoms, and integration with external cameras via bus modulators. It works seamlessly with a wide array of Siedle components, including classic and steel door stations, compact under-mount units, and various indoor phones with color displays. Whether configuring a simple single-family home or a complex multi-dwelling unit, this power supply provides the robust foundation needed for a modern, secure, and convenient entry system.
Key Notes for Installation
- Always ensure the camera strand and monitor strand are laid in separate cables to prevent image disturbances.
- Every monitor branch must end with an RC termination circuit consisting of a 100 Ohm resistor and a 1 nF capacitor.
- The maximum allowable attenuation within a single strand is 45 dB without signal boosting.
- Use a dedicated network switch with at least 3 mm contact opening for safe power disconnection.
- The device operates reliably up to an altitude of 2000 meters above sea level.
Search for 67,706 Manuals online
Type-in Brand or Model