Showtec Titan Strobe Manual
PDF manual · 13 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Showtec Titan Strobe manual using AI
Get instant AI answers from your Showtec Titan Strobe manual
Ask anything about the Showtec Titan Strobe. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Titan Strobe?
Yes NoVideo Manual
Showtec - Titan Vintage FX. Product Code 40355
Frequently Asked Questions
The Titan Strobe uses a PX-1800 lamp (order codes 82692 or SPBOT3022). Only use the specified lamp type and wattage; do not install higher-wattage lamps. Allow the lamp to cool before replacement and avoid touching the bulb glass with bare hands.
Is this answer helpful?
The unit uses two DMX channels: channel 1 controls speed and channel 2 controls dimmer. Set the start address with dip switches on the rear panel. Multiple units set to the same address will operate synchronously. Refer to dip-switch address tables to calculate the correct start address.
Is this answer helpful?
Yes, but strict rigging procedures must be followed: use professional trussing, a mounting clamp with the bracket, and a secondary safety attachment (safety cable or net). Installation should be performed by qualified personnel in accordance with national rigging standards.
Is this answer helpful?
Regularly clean the glass cover and housing (disconnect power first). Wipe optics with a soft cloth and glass cleaner; avoid solvents. Inspect screws, housing, and cables for corrosion or damage. Keep DMX and power connectors clean and dry before reuse.
Is this answer helpful?
Check power connection and voltage, inspect/replace the lamp with the correct PX-1800 type, and verify the automatic circuit breaker. If issues persist, refer the unit to a qualified technician for service.
Is this answer helpful?
No. The device is for indoor use only and must be kept away from rain and moisture. Ensure proper ventilation and avoid exposure to extreme humidity or temperatures above specified limits.
Is this answer helpful?
Maintain at least 0.8 meters between the light output and the illuminated surface, and a minimum of 0.5 meters from flammable surfaces. Also allow at least 50 cm free air space around the unit for ventilation.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High 1800W flash output delivers strong, visible strobe effects suitable for large venues.
- DMX control with two channels for speed and dimmer enables synchronized, precise lighting setups.
- Self-test modes (AUTO/MANUAL) allow on-device testing without a DMX controller.
- Automatic 16A circuit breaker reduces downtime—no manual fuse swaps required.
- Compact, robust build with standard XLR DMX IN/OUT and clear status indicators.
Disadvantages
- Requires professional rigging and safety attachment for overhead installation.
- PX-1800 lamp replacement needed periodically; lamp handling and cooldown precautions required.
- Indoor use only; device must be kept dry and ventilated (50 cm clearance).
- No user-serviceable internal parts; repairs require qualified technicians.
- Operation outside specified temperature/humidity or improper wiring voids warranty.
Product Specification
Power
1500W
Flashes per Second
1-15
DMX Control
yes
Product Description
Showtec Titan Strobe — Powerful, Professional Strobe Lighting
The Showtec Titan Strobe is a high-output, DMX-controllable strobe built for clubs, stages, houses of worship, and rental inventories. Delivering an 1800W flash and adjustable speed from 1 to 15 flashes per second, the Titan provides both simple plug-and-play operation and full integration into DMX networks for synchronized shows. Robust construction, an automatic 16A circuit breaker, and a replaceable PX-1800 lamp make it reliable for heavy use when installed and maintained correctly.
Beyond raw output, the Titan offers flexible control: two DMX channels handle speed and dimmer, while dip-switch addressing supports precise start-address configuration. Self-test modes (AUTO and MANUAL) allow on-unit checks and local control without a controller. The rear panel includes standard 3-pin XLR DMX IN/OUT, a power indicator, DMX indicator, and dip switches for quick setup.
Safety and installation are emphasized: the unit is Class I and requires earth connection, a minimum of 50 cm ventilation clearance, and adherence to rigging best practices. Professional mounting to trussing and secondary safety attachments are required for overhead installations. The manual warns against exposure to moisture, covering vents, operating without the protective shield, and using a dimmerpack. Lamp replacement and servicing are restricted to qualified technicians; the lamp must cool before handling and only approved lamp types (PX-1800) should be used.
Maintenance is straightforward: keep the glass and housing clean to maintain output, regularly inspect screws and cables, and avoid solvents on the optics. The unit uses an automatic fuse/circuit breaker—no fuse replacement is normally required. Troubleshooting guidance covers common faults: check mains and lamp for "no light" issues and DMX cabling and controllers for signal problems. Product specs include 240V–50Hz operation, 16A protection, compact dimensions, and a weight around 3.65 kg.
The Titan Strobe suits users who need intense, controllable strobe effects with professional rigging and safety considerations. It pairs well with DMX controllers and standard trussing hardware, and an optional blinder-function processor update expands its effect palette.
Notes
- Use only PX-1800 lamps (order codes 82692 / SPBOT3022). Replace lamps only after cooling and with gloves or alcohol-wiped handling to avoid oil contamination.
- Maintain at least 0.8 m from the lit surface and 0.5 m from flammable materials.
- Follow national rigging standards and use safety cables for overhead mounting.
- Warranty period: one year from purchase.
Search for 67,706 Manuals online
Type-in Brand or Model