Manual.ly Logo

sera LED Moonlight Set Manual

0.0 · 0 Ratings

PDF manual · 80 Pages

English

M: QW-35-FL
page

/ 80

Loading...
13408bc4950a900804a6414ff552a58bd2d8 page a
10
Congratulations for purchasing our LED Moonlight
Set. You purchased an innovative product devel-
oped for allowing an interesting nocturnal observa-
tion of your aquarium or terrarium, and to meet the
requirements of your animals to life according to the
rhythm of nature.
The sera LED Moonlight Set is a nocturnal light-
ing system that imitates moonlight conditions during
lunation. Lunation lasts 29 days from new moon via
waxing moon until the brightest phase at full moon,
followed by waning moon until the next new moon.
Light variations of the different moon phases are sim-
ulated by the brightness program, as shown in the
image. It is therefore possible to design the aquarium
or terrarium even more similar to nature.
Please read this information for use carefully and fol-
low the following advice as to ensure lasting joy in
your new product.
SAFETY PRECAUTION
Use the sera LED Digital Moonlight Timer only
within its application range as described in the fol
-
lowing in this information for use. It is a low voltage
moonlight timer with an application range of 10 –
20 V DC input voltage and not exceeding 3 A input
current. The maximum output voltage cannot exceed
the input voltage.
Application and application range
The sera LED Digital Moonlight Timer allows dim-
ming one or several sera LED X-Change Tubes (also
in different lengths) up to a total wattage of 60 W.
The “moonlight” sera LED X-Change Tube is already
included in the set.
Unlike the sera LED Digital Dimmer, which was de-
signed for dimming daylight, the sera LED Digital
Moonlight Timer does not cause a reddish dimming
process even with sera sunrise Tubes.
Make sure the wattage is not exceeded and the
lamps in question are really dimmable at voltages
ranging from 10 – 20 V in case the sera LED Digi-
tal Moonlight Timer is being used with other LED
lamps. Several LED lamps can be operated via one
LED ballast/driver.
Operating the sera LED Moonlight Sets requires a
20 V DC LED ballast. The sera LED Moonlight Set
can be additionally connected to an existing ballast
such as the sera LED Driver using the Triple Cable,
provided the wattage is sufcient (3 A).
Otherwise we recommend the sera LED Driver
20 V DC 1 A (3 B).
Please be aware that ballasts for personal computers
are not permitted for operating LED lamps.
Kit includes
1. sera LED Digital Moonlight Timer with cable
and 5.5 mm barrel plugs
1.1 Display
1.2 HOUR, F∙br, DEMO key
1.3 MINUTE, (ON/OFF), RESET key
1.4 MINUS key
1.5 PLUS key
1.6 SET key
1.7 Holder
1.8 Screws (4 pcs)
2. sera LED moonlight, X-Change Tube, 180 mm
(7 in.)
2.1 2 pcs double suction cup holder
2.2 “Silver moon foil” – adhesive foil for creating
diffuse light
Assembly instruction
The sera LED Digital Moonlight Timer is connect-
ed between LED driver/ballast and the sera LED
moonlight (LED lamp) as a consumer. If you wish to
control several consumers, connect the sera LED
Triple Cable to the output of the moonlight timer
as a distributor. This allows you connecting up to
three consumers. You can even increase the num-
ber of possible consumers with further distributors.
The cables cannot be connected falsely as the used
barrel connectors provide protection against polar-
ity reversal.
Location
The sera LED Digital Moonlight Timer should be
installed in an easily accessible place. Make sure it
is installed in a dry area. Use the included holder (1.7)
to do so. It can be easily mounted to/in a cabinet or
such by using 4 screws (1.8).

Information for use
sera LED Moonlight Set
Please read these instructions carefully and keep for future use. When forwarding this unit to third

304043-00_sera LED Moonlight Set_INT_GBI.indd 10 20.04.2017 13:41:32

Chat with your sera LED Moonlight Set manual using AI

Get instant AI answers from your sera LED Moonlight Set manual

Ask anything about the sera LED Moonlight Set. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend LED Moonlight Set?

Yes No

Frequently Asked Questions

A

In mode F3, the light dims to 10% of its set brightness every 20 minutes for about 90 seconds. This creates a realistic cloud passing effect, but it only starts one hour after the programmed moonrise begins.

Is this answer helpful?

A

No, manual adjustments are blocked during automatic dimming processes like moonrise or moonset. You must wait until the phase is complete before changing settings manually.

Is this answer helpful?

A

If the power is interrupted for several minutes or longer, all programmed settings are lost. You will need to re-enter the time, moonrise/moonset schedules, and phase day.

Is this answer helpful?

A

The LED moonlight tube itself is waterproof (IP68), but the electrical connector and cable must remain dry. Do not submerge the plug or connections in water.

Is this answer helpful?

A

Yes, according to the programmed calendar, the light remains off during the new moon phase (Day 15) to simulate zero moonlight conditions accurately.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Simulates natural 29-day lunar cycle for authentic animal rhythms
  • Includes three programmable modes including cloud simulation
  • Low voltage DC operation ensures safety for aquarium use
  • Prevents reddish tinting common in other dimming systems
  • Comes with diffuser foil for customized light intensity
VS

Disadvantages

  • Settings reset if power supply is interrupted for too long
  • Manual adjustments cannot be made during automatic dimming cycles
  • Glass tube requires careful handling to avoid breakage
  • Cable damage voids warranty and requires unit replacement
  • Requires compatible 10-20V DC driver for operation
M: QW-35-FL

Product Specification

Type

Moonlight, Controller

Application

Aquarium, Terrarium

Power

3W

Color Temperature

12000K

Luminous Flux

5.9lm

Dimensions

7.09in

Features

Suction Cup, LED (blue)

M: QW-35-FL

Product Description

Enhance Your Aquarium with the sera LED Moonlight Set

Creating a natural environment for your aquatic or terrestrial pets is essential for their well-being. The sera LED Moonlight Set offers an innovative solution by simulating the lunar cycle within your aquarium or terrarium. This nocturnal lighting system replicates the phases of the moon over a 29-day synodic month, transitioning smoothly from new moon to full moon and back again. By mimicking these natural light fluctuations, the set provides a more authentic habitat that aligns with the biological rhythms of your animals.

The core of this system is the Digital Moonlight Timer, which allows for precise control over brightness and timing. Unlike standard dimmers, this timer avoids reddish hues even when used with sunrise tubes, ensuring a pure moonlight effect. You can program specific moonrise and moonset times, and choose between three distinct operating modes. Mode F1 simulates a clear sky with gradual dimming, while Mode F3 adds a realistic cumulus cloud simulation that periodically darkens the light. Additionally, you can manually adjust the overall brightness to suit your tank size or personal preference.

Installation is straightforward, featuring a durable X-Change Tube equipped with double suction cups for easy mounting above the waterline. A special silver moon foil is included for smaller tanks to diffuse the light further, creating a softer ambiance. The system operates on low voltage DC power, making it safe and energy-efficient. Whether you are observing nocturnal behavior or simply enhancing the aesthetic appeal of your setup at night, this set delivers a sophisticated lighting experience.

M: QW-35-FL

© Copyright 2026 Manual.ly