Manual.ly Logo

sera F 400 Manual

0.0 · 0 Ratings

PDF manual · 46 Pages

English

M: gpt-5.6-terra
page

/ 46

Loading...
4d254eca79bbdbe1b37cd39f8f4054314517 page 7
7
The serainternalltersF400/700/1200adjust-
able with sponge lter convince due to their com-
pact and robust construction as well as their low en-
ergy consumption and their adjustability. These F
series internallters are being offered in 3 power
levels with the sera aquarium pumps PRECISION
P 400/700/1200. The correct power level is available
for nano aquariums up to 300 l (80 US gal.) aquarium.
Due to their plain design, the serainternalltersF
400/700/1200adjustable can be placed unobtru-
sively in the aquarium. The high circulation perfor-
mance ensures constant conditions in the aquarium
and thus contributes to the stabilization of the bio-
logical system.
SAFETYPRECAUTION
All electrical units located in the water must be dis-
connected from the mains/power supply before con-
ducting work at the aquarium!
Kitincludes
Aquarium pump PRECISION P 400/700/1200 with
suction cup holder plate and 4 suction cups; 1.5 m
(5 ft.) cable
Perforated water intake pipe with adjustment nozzle
Filter sponge with push-on opening for lter sponge
holder tube
The
serainternallterF consists of:
A: PRECISION P 400/700/1200 – Water proof hous-
ing with electric motor, steel shaft and 1.5 m
(5 ft.) power cord with plug
B: Impeller with magnet
C: Motor cover with water intake and water outlet
nozzle
D: Regulation adapter
E: Perforated water intake pipe
F: Filter sponge
G: Bracket with four suction cups
Only
serainternallterF1200adjustable:
H: Current distributor with Venturi nozzle and air
hose with valve
Applicationandapplicationrange
First, push the bracket with the four suction cups (G)
onto the chamfered side of the housing (A). Push the
thick end of the black regulation adapter (D) onto the
water intake of the motor cover (C). Then push the
thinner end of the perforated water intake pipe (E)
into the regulation adapter. Now slide the seralter
sponge (F) over the perforated water intake pipe un-
til it touches the housing, and turn it until it is in line
with the housing. The
serainternallter Fadjust-
ableis now ready to use.
Adjustmentofpumpperformance:
Install the lter in its nal position in the aquarium.
Push the plug into the socket and check that the
pump performance meets your requirements. If it
does not, pull the plug and take the lter out of the
aquarium. Slide the lter sponge back slightly to al-
low access to the regulation adapter. To change the
pump’s performance, turn the regulation adapter to
a new direction. Then slide the lter sponge back into
position. Repeat this procedure until you have found
the optimal ow rate of the lter.
Only
serainternallterF1200adjustable:
The current distributor that can be pushed onto the
outlet tube of the
serainternallterF1200adjust-
able allows to adjust the water ow direction. Using
the Venturi nozzle allows optimizing the oxygen sup-
ply of the aquarium. The air intake can be adjusted
with the valve (H).
Cleaning
When a loss of performance is noticed, remove the
lter sponge and coarsely rinse it under lukewarm
water.
To clean the impeller (B) the motor cover must be re-
moved. Carefully pull the outlet nozzle forward, which
ips the motor cover off the housing. Rinse the parts
under running water. Use a soft, clean brush to re-
move deposits or algae if necessary. Reassemble the
lter. Add benecial lter bacteria (serabionitrivec)
onto the lter sponge to immediately make the lter
biologically active again!
Location
The pump should be placed at the aquarium glass
and be operated completely submerged. Avoid the
pump drawing in air as well.
US
Informationforuse
serainternalltersF400/700/1200adjustable
for freshwater aquariums
Pleasereadtheseinstructionscarefullyandkeepforfutureuse.Whenforwardingthisunittothird
parties,thisinformationforuseisalsotobehandedover.
305026-00_Innenfilter_F_400_700_1200_INT_GBI.indd 7 23.03.2017 09:33:17

Chat with your sera F 400 manual using AI

Get instant AI answers from your sera F 400 manual

Ask anything about the sera F 400. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend F 400?

Yes No

Frequently Asked Questions

A

The F 400 is intended for freshwater aquariums. Its adjustable 400 l/h maximum flow makes it a practical option for nano tanks, shrimp aquariums, breeding setups, planted tanks, and other smaller aquariums needing controlled internal filtration.

Is this answer helpful?

A

Yes. Flow is adjusted by turning the regulation adapter after moving the filter sponge slightly to access it. Test the filter in its final aquarium position, disconnect it before making changes, and repeat until the current suits the aquarium.

Is this answer helpful?

A

The F 400 has a power consumption of 4 W and a maximum flow rate of 400 l/h. This combination is suited to aquarists seeking compact circulation with modest energy use.

Is this answer helpful?

A

When the water flow noticeably decreases, remove the sponge and rinse it coarsely in lukewarm water. Gentle cleaning helps retain useful bacteria. Reinstall the sponge correctly after cleaning and inspect the intake area for debris.

Is this answer helpful?

A

No. The filter must be operated completely submerged. It should be mounted on the aquarium glass and positioned so it does not draw in air. Never operate the pump without water.

Is this answer helpful?

A

Mechanical components can largely be removed and replaced. Available replacement items include sponges, impellers, and mounting parts. The sealed motor block cannot be repaired, and a damaged power cable requires replacement of the complete pump unit.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Adjustable flow lets aquarists tailor circulation for shrimp, fry, plants, and smaller freshwater setups.
  • Low 4 W power consumption supports efficient everyday operation at up to 400 l/h.
  • Sponge cartridge provides mechanical filtration and a surface for beneficial biological bacteria.
  • Compact body and suction-cup mount allow discreet placement against aquarium glass.
  • Replaceable sponge, impeller, and mounting parts support routine maintenance.
VS

Disadvantages

  • The pump must remain fully submerged and must never be operated dry.
  • The sealed motor block and power cable cannot be repaired if damaged.
  • Sponge cleaning is needed when flow drops, and poor maintenance can damage the impeller.
  • Designed for freshwater only; use with corrosive liquids voids warranty.
  • The 400 l/h maximum may be insufficient for larger or heavily stocked aquariums.
M: gpt-5.6-terra

Product Specification

Type

Internal filter

Suitable for

Freshwater, aquariums, terrariums, breeding tanks

Filter flow rate

max. 105.67 gal/h

Filtration

1x foam filter (fine)

Power consumption

4 W

M: gpt-5.6-terra

Product Description

sera F 400 Adjustable Internal Filter for Dwarf Shrimp and Breeding Aquariums, 400 l/h - Read, Download & Print Free

The sera F 400 Adjustable Internal Filter for Dwarf Shrimp and Breeding Aquariums, 400 l/h is a compact freshwater filter designed for aquarists who need dependable circulation without overwhelming a smaller aquarium. Its adjustable output makes it especially useful where a calm, controllable current is important, such as dwarf shrimp colonies, fry tanks, planted setups, and breeding aquariums.

With a maximum flow rate of 400 l/h and a low 4 W power draw, the F 400 balances practical filtration with energy-conscious operation. The integrated sponge cartridge supports mechanical filtration by trapping suspended debris while also offering a large surface for beneficial bacteria. These bacteria help maintain the biological balance that shrimp and young fish depend on.

Designed for Gentle, Adaptable Filtration

The filter attaches directly to the aquarium glass with a holder and four suction cups. Its understated shape helps it blend into the aquarium rather than dominate the view. The pump must be operated fully submerged, and the perforated intake tube distributes suction across the sponge area. This arrangement can be a helpful choice for aquariums where protecting small inhabitants is a priority.

Flow adjustment is made through the regulation adapter. After placing the filter in its intended position, users can test the current and fine-tune it until it suits the aquarium layout and livestock. A lower setting can help avoid excessive movement in delicate mosses and shrimp feeding areas, while a stronger setting can improve circulation in a more open aquarium.

Straightforward Cleaning and Care

Routine care is simple. When water flow noticeably declines, remove the sponge and rinse it gently in lukewarm water. Avoid harsh cleaning methods that may reduce the useful bacterial population. The impeller and pump components can also be rinsed under running water, with a soft brush used for algae or deposits when needed.

The mechanical parts are largely replaceable, including the sponge, impeller, and mounting components. The sealed motor block is not repairable, so careful handling of the housing, plug, and 1.5 m power cable is essential. Always disconnect aquarium electrical equipment before maintenance, use a drip loop, and never run the pump dry.

Notes

  • Suitable only for freshwater aquariums.
  • Maximum water temperature is 35 C / 95 F.
  • Check the cable and plug before each use.
  • Select the final flow setting after observing livestock behavior and plant movement.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly