Manual.ly Logo

sera Biotop LED Cube 130 XXL Manual

0.0 · 0 Ratings

PDF manual · 56 Pages

English

M: OA-GPT-54-NAN
page

/ 56

Loading...
2b7a332f758646b468bf9b78d4acedeccb7f page 8
Thank you for choosing the new sera Biotop LED Cube
130 XXL.
The newly developed LED cover with 12 powerful LED
chips in modern SMD technology is 33% brighter than the
aquarium covers with uorescent tubes, whereas the
power uptake is only half as high.
Besides saving energy you will also benet from the long
lifetime of the LED chips. Lamp replacement is no longer
required every year, and even single LED units failing hard-
ly affects brightness in the aquarium. The lighting can still
be operated without any problems until the faulty LED unit
has been replaced.
The new sera Biotop LED Cube 130 XXL of course pro-
vides the well proven 3 side view due to the bow front. This
allows watching the aquarium inhabitants easily also in the
sera Biotop LED Cube 130 XXL.
General notes
• Please read these instructions carefully and keep for
future use. Also, please check your sera aquarium for
completeness.
• Please switch off all submerged technical devices by
pulling their mains plugs before touching the water with
your hand.
The aquarium is optimally packed. However, damages
due to long range transport may have occurred, as is
the case with all glass products. Therefore please
  

Kit includes
Plug-in complete equipment
ready to start
Aquarium with bow front (1.1)
Polished glass
Volume c. 130 liters (34 US gal.)
Dimensions with closed cover approx.: W 51 cm x H
62.6 cm x D 58 cm (20 in. x 24.6 in. x 22.8 in.)
Aquarium cover (1.2, 1.3) with
•
12 white light LED chips with 10 * 0.2 W LEDs in SMD
technology each (1.2.1)
•
neutral daylight
•
2 fans for cooling the electronic components
•
built-in food ap (1.3)
•
maintenance ap for the 4 chamber internal lter (1.2.2)
• openings for connecting a cooling system or accesso-
ries (1.2.4)
•
sera ballast Input 100 – 240 V 50/60 Hz, Output 12V DC
3 A (1.2.3)

•
2 lter sponges for mechanical ltration (1.5.1)
•
sera siporax Professional 2,000 ml (580 g / 1.2 lb.) for
biological ltration (1.5.2)
1 liter (1 US quart) sera siporax Professional – pro-
vides as much settling space for bacteria as, for in-
stance, 34 liters (9 US gal.) of clay lter material.
•
 (1.5.3)
•
sera heater 100 W (1.5.4)

(1.6)
100 ml (3.38 .oz.) sera aquatan water conditioner (1.7)
100 ml (22 g / 0.8 oz.) sera vipan staple food (1.8)
This part of the information for use refers to operating the
LED cover and the glass tank.
Please read the according information for use for operating
the included devices.
Assembly and operation
First assemble the cabinet, if applicable (cabinet is not in-
cluded). Please note the instructions included with the cab-
inet to do so.
Location:
Place the sera aquarium in a suitable location. Depending
on the internal decoration, the aquarium may weigh up to
200 kg (441 lb.). Therefore, the chosen location should
be perfectly even (best use a spirit level for balancing). Of
course, a mains supply should be available nearby. If you
have purchased the aquarium without a cabinet and wish
to place it on an already existing piece of furniture, it must
provide sufcient carrying capacity. The aquarium should
by no means be placed near a sunny window. Too much
sunlight does not only heat up the aquarium too strongly,
but may also cause algae blooms. The sera Biotop LED
Cube 130 XXL is equipped with a glued-on safety frame.
Place the aquarium with its frame directly onto the cabinet.
Do not use any additional mats.
Options:
•
Lamps: The sera Biotop LED Cube 130 XXL is by de-
fault equipped with 12 white LED chips. The LED chips
can be replaced separately. Please use only original sera
spare parts.
When keeping small blue sh, you may, for instance, re-
place two white LED chips with blue LED chips for en-
hancing the color.
8

Instructions for installation and use
sera Biotop LED Cube 130 XXL
Please read these instructions carefully and keep for future use. When forwarding this unit to third parties, this
information for use is also to be handed over.
Biotop LED Cube 130 XXL.indd 10 24.09.2012 10:02:40

Chat with your sera Biotop LED Cube 130 XXL manual using AI

Get instant AI answers from your sera Biotop LED Cube 130 XXL manual

Ask anything about the sera Biotop LED Cube 130 XXL. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Biotop LED Cube 130 XXL?

Yes No

Frequently Asked Questions

A

It uses 12 modern white LED chips in SMD construction, giving strong daylight-like illumination with lower energy use than traditional fluorescent covers. The design also supports long service life and individual chip replacement.

Is this answer helpful?

A

Yes, it is presented as a complete plug-in system. The package includes the tank, LED cover, ballast, internal filter components, heater, pump, flow distributor, water conditioner, and starter food.

Is this answer helpful?

A

The tank uses a four-chamber internal filter. The first chamber handles mechanical filtration, the second houses the heater, the third contains biological media for beneficial bacteria, and the fourth holds the circulation pump.

Is this answer helpful?

A

Yes. The lighting is designed so individual LED chips can be replaced instead of changing the entire cover. The manual recommends using original sera spare parts for best compatibility and safety.

Is this answer helpful?

A

It should be placed on a perfectly level, stable surface with enough load capacity. A nearby power source is needed, and direct sunlight should be avoided to prevent overheating and algae problems.

Is this answer helpful?

A

No. The unit includes electrical components and water-based equipment, so children should be supervised. The instructions also warn that the appliance is not meant for unsupervised use by people with limited abilities.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Energy-saving LED cover with brighter output than older fluorescent-style tops.
  • Curved front glass offers a wide, attractive three-sided viewing experience.
  • Complete setup includes filter, heater, pump, and water conditioner for convenience.
  • Replaceable LED chips add flexibility and help extend the life of the lighting system.
VS

Disadvantages

  • Heavy setup may reach around 200 kg, so it needs a strong, perfectly level stand.
  • Not suitable for direct sunlight, which can raise heat and trigger algae growth.
  • The LED cover and pump require careful maintenance and correct water level to work safely.
  • Warranty does not cover normal wear items such as LED chips and the ballast.
M: OA-GPT-54-NAN

Product Specification

Type

Aquarium

Suitability

Freshwater

Tank shape

Vertical cuboid, horizontal panorama, square base with curved front and rounded corners

Capacity

34.34 gal

Dimensions

20.08x24.65x22.83 in

Weight

40.79 lbs

Special features

Lighting (2x 12W, LED), Filter (sera siporax Professional), Pump (sera circulation pump STP 1000), Heater (sera Heater 100W), closed cover

M: OA-GPT-54-NAN

Product Description

sera Biotope LED Cube 130 XXL: A Smart Start for a Stylish Aquascape

The sera Biotope LED Cube 130 XXL is designed for aquarists who want a polished, all-in-one setup without sacrificing visual appeal. With its curved front glass and three-sided viewing experience, it creates a clean panoramic look that makes fish, plants, and hardscape stand out beautifully. The design feels modern, yet it stays practical for everyday aquarium keeping.

One of the strongest features highlighted in the sera Biotope LED Cube 130 XXL Manual is the lighting system. The cover uses 12 white LED chips in SMD construction, delivering a brighter result than older fluorescent setups while using far less power. That means lower energy consumption, reduced heat, and a long service life. The LEDs are replaceable individually, which adds flexibility and helps extend the useful life of the unit.

The aquarium also includes a built-in four-chamber internal filter, making it a true plug-in solution for setting up a biotope-style tank. Mechanical filtration is handled by filter sponges, while biological filtration relies on sera siporax Professional, a medium known for offering a large surface area for beneficial bacteria. A 100 W heater and circulation pump are included as well, so the system is built to support stable water conditions from the start.

Another thoughtful detail is the integrated fan cooling for the LED cover. This helps protect the electronics and supports reliable day-to-day operation. The feeding flap and maintenance access add convenience, while the overall layout makes routine care more manageable than on many compact aquarium systems. For beginners, that simplicity is a real advantage; for experienced hobbyists, it offers a strong foundation for a carefully planned display.

In practice, the sera Biotope LED Cube 130 XXL suits small to medium aquatic communities and visually striking biotope setups. It is a tank that balances aesthetics, efficiency, and function, especially for users who appreciate a complete system with well-matched components. If you are browsing the sera Biotope LED Cube 130 XXL Manual for setup ideas, the product clearly aims to make the first steps easier while still leaving room for customization.

Notes

  • Place the aquarium on a perfectly level, load-bearing surface.
  • Avoid direct sunlight to reduce overheating and algae growth.
  • The unit should only be transported when empty.
  • Regularly check water level and fan operation for safe performance.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly