Manual.ly Logo

sera Biotop Cube 130 XXL Manual

0.0 · 0 Ratings

PDF manual · 111 Pages

English

M: OA-GPT-54-NAN
page

/ 111

Loading...
ec6eefcab3a506209d94aaef53573060eb32 page e
14
We are glad that you decided on purchasing a modern
design sera complete aquarium. The bent three side
pane allows for best view into the aquarium. The larger
depth compared to rectangular tanks allows for plenty
of design possibilities for underwater landscapes simi-
lar to nature.
The tank includes the complete technical equipment,
we leave everything else to your creativity and imagi-
nation.
1. General notes
• Please read these instructions carefully and keep for
future use. Also, please check your sera aquarium for
completeness.
• Please switch off all submerged technical devices by
pulling their mains plugs before touching the water
with your hand.
• Slight color alteration caused by light irradiation (es -
pecially UV light) is normal. Do not place in direct sun-
light.
The aquarium is optimally packed. However, damages
due to long range transport may have occurred, as is
the case with all glass products. Therefore please
check whether the glass is intact.
2. Kit includes
Aquarium with bow front (fig. 1.1)
Polished glass
Volume approx. 130 liters (34 US gal.)
Dimensions: width 51 cm x height 66.5 cm x depth 57 cm
(20 in. x 26 in. x 22.5 in.)
Aquarium cover (fig. 1.2) with
• 2 fluorescent tubes for aquariums T5 PL-24 W (1.2.1)
neutral daylight
• 2 fans for cooling electronic components (1.2.2)
• built-in food flap (1.2.3)
• openings for connecting a cooling system or acces-
sories (1.2.4)
sera fil bioactive 130 external filter (fig. 3) – please see
attached instructions for use
sera heater 150 W (fig. 1.3)
3. Assembly and operation
First assemble the cabinet, if applicable (cabinet is not
included). Please note the instructions included with
the cabinet to do so.
Location
Place the sera aquarium in a suitable location. De pend -
ing on the internal decoration, the aquarium may
weigh up to 200 kg (441 lb.). Therefore, the chosen lo -
cation should be perfectly even (best use a spirit level
for balancing). Of course, a mains supply should be
available nearby. If you have purchased the aquarium
without a cabinet and wish to place it on an already
existing piece of furniture, it must provide sufficient
carrying capacity. The aquarium should by no means
be placed near a sunny window. Too much sunlight
does not only heat up the aquarium too strongly, but
may also cause algae blooms. The sera Biotop Cube 130
XXL is equipped with a glued-on safety frame. Place
the aquarium with its frame directly onto the cabinet.
Do not use any additional mats.
Options
Cooling: A cooling unit can be connected via the sera
fil bioactive external filter in case the room tempera-
ture should rise above 30°C (86°F) in summer.
SAFETY PRECAUTION
The aquarium may only be transported when empty.
Aquarium cover (fig. 2)
Opening or folding back the aquarium cover
You can open the cover in a common way and keep it
in position with the support bars (2.4/2.5) or fold it
back (2.6 – 2.8). The latter is recommended for larger
maintenance work.
If you wish to fold back the cover, push it to the back
to the catching point (2.6). You can then fold back the
cover easily and safely (2.7), and it will stand firmly at -
tached to the brackets in an upright position behind
the aquarium (2.8).
Assembly of aquarium cover
Removing the cover
Loosen the stoppers (1.2.5) at the bottom side of the
cover from the upper side using a Phillips screwdriver.
Now pull the cover forward until both holder brackets
(2.2) come off the directing bar. It is easier to pull the
cover when the food flap is open. Now take the cover
off.
Placing the cover
Place the cover on top of the aquarium in a way that it
stands out by approx. 5 cm (2 in.) at the front side. Now
push the cover backwards (2.3) so the holder brackets
(2.2) lock to the bars on both sides. Now fasten the
stoppers (1.2.5) again. Fold the cover backwards once
as to ensure it is attached correctly (2.6 – 2.8).
Fluorescent tubes inside the aquarium cover
The cover is already equipped with two T5 PL-24 W
(daylight) fluorescent tubes (1.2.1). We recommend
always to use these fluorescent tube types, which have
a life time of approx. 1 year (depend ing on daily light -
ing time). The cover contains 2 integrated fans (1.2.2)
that direct the heat of the light unit upwards out of
the cover. The fluorescent tubes are switched on by
two switches. The right switch (2.10) is the main power
switch that switches on the first lamp and both fans.
US
Instructions for installation and use
Please read these instructions carefully and keep for future use.
sera Biotop Cube 130 XXL
GBI sera Cube 130 XXL INT:GBI sera fil bioactive INT 02.11.09 12:18 Seite 15

Chat with your sera Biotop Cube 130 XXL manual using AI

Get instant AI answers from your sera Biotop Cube 130 XXL manual

Ask anything about the sera Biotop Cube 130 XXL. Answers come from this manual, with the pages they are based on.

Biotop Cube 130 XXL Maintenance Schedule

Remind me when maintenance is due
Monthly
Replace fluorescent tubes and starter

Replace fluorescent tubes at least once per year. Replace the starter simultaneously.

Monthly
Clean mechanical filter media

Rinse filter mat and sponge weekly with warm water without detergents. Replace if severely clogged.

Show in the manual (page 11)
Quarterly
Clean biological filter media (normal stock)

Rinse biological media every 3 to 4 months for normal fish stocking if flow rate is reduced.

Show in the manual (page 11)
Semiannual
Clean biological filter media (optimal stock)

Rinse biological media every 6 to 12 months for optimal fish stocking conditions.

Show in the manual (page 11)
Every 2 years
Replace hoses and filter head seal

Replace all hoses and the filter head seal every two years. Grease the seal with Vaseline before closing.

Show in the manual (page 13)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Biotop Cube 130 XXL?

Yes No

Frequently Asked Questions

A

Its curved front and deeper layout create a more natural-looking display with strong viewing angles and extra space for creative aquascaping. It is built to look good while still supporting a functional aquatic setup.

Is this answer helpful?

A

Yes. The setup includes the aquarium, cover, two daylight lamps, cooling fans, a feeding flap, a heater, and the sera fil bioactive 130 external filter. This makes it a ready-to-build foundation for a biotope aquarium.

Is this answer helpful?

A

The filter uses mechanical media to catch debris and biological media to support bacteria that break down harmful substances. This combination helps maintain clearer water and healthier conditions with less manual cleanup.

Is this answer helpful?

A

Yes. The cover can be lifted normally or folded back for larger tasks. The folding position gives better access for cleaning, planting, and equipment checks without removing the entire top section each time.

Is this answer helpful?

A

It includes cooling-related features and can support an additional cooling unit through the filter system. That makes it better prepared for warm periods, though the aquarium should still be kept away from direct sunlight.

Is this answer helpful?

A

The recommended interval is about once a year, depending on daily use. Replacing the starter at the same time is also advised to keep the lighting system working reliably and efficiently.

Is this answer helpful?

A

It must sit on a perfectly level, load-bearing surface and should only be transported when empty. The manual also stresses disconnecting electrical devices before any work inside the aquarium or on the filter.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Curved front glass gives a wide, attractive viewing angle.
  • Complete starter system includes lighting, heater, and filter.
  • External bioactive filtration supports clear water and stable conditions.
  • Cover design makes feeding and maintenance more convenient.
VS

Disadvantages

  • The filled aquarium is heavy and needs a strong, level stand.
  • Fluorescent tubes and starters need periodic replacement.
  • Direct sunlight can cause overheating and algae growth.
  • Filter maintenance must be done carefully to protect bacteria.
M: OA-GPT-54-NAN

Product Specification

Type

Aquarium

Suitability

Freshwater

Tank Shape

Vertical cuboid, horizontal panorama, square base with curved front and rounded corners

Capacity

34.34 gal

Dimensions

20.08x26.18x22.83in

Weight

40.82 lbs

Special Features

Lighting (2x 25W T5), Filter (sera fil bioactive 130), Heater (sera Heater 150W), closed cover

M: OA-GPT-54-NAN

Product Description

sera Biotope Cube 130 XXL: a polished stage for a natural aquascape

The sera Biotope Cube 130 XXL is designed for aquarists who want more than a simple glass box. Its curved three-sided front creates a wide, immersive view, while the deeper layout gives extra room for layered planting, driftwood, stones, and fish movement. The result is a display that feels closer to a living biotope than a standard tank, making it attractive for hobbyists who enjoy both visual design and practical function.

What makes this model especially appealing is the complete setup. It arrives with a 130-liter aquarium, a fitted cover, twin T5 PL-24 W daylight lamps, cooling fans for the lighting unit, a feeding flap, a 150 W heater, and the sera fil bioactive 130 external filter. That means the core technical pieces are already matched to the aquarium, helping create a balanced starting point for a stable aquatic environment.

The filtration system is one of the strongest points covered in the sera Biotope Cube 130 XXL Manual. The external filter combines mechanical and biological stages, using filter floss, sponge, and sera siporax media to remove debris and support healthy bacterial activity. When started correctly, it is built to deliver clear water with low energy use and quiet operation. For owners who value water quality and long-term stability, this is a major advantage.

Day-to-day use is also thoughtfully arranged. The cover can be opened in a normal position or folded back for easier access during larger maintenance tasks. The lighting system is split into two controllable lamps, and the built-in fans help manage heat around the electronics. There is even support for optional cooling, which is useful during warmer months when aquarium temperatures can rise too high.

Summary

This aquarium package is best viewed as a practical foundation for a well-planned biotope build. It combines attractive design, integrated equipment, and a filtration approach that supports a healthy ecosystem when maintained correctly. For aquarists who want a premium-looking setup with strong technical support, it offers a smart blend of style and reliability.

Notes

  • Keep the tank on a fully level, load-bearing surface.
  • Avoid direct sunlight to reduce heat and algae risks.
  • Follow the maintenance steps carefully to protect beneficial bacteria.
  • Replace fluorescent tubes regularly for consistent lighting performance.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly