Manual.ly Logo

SENA R1 Manual

0.0 · 0 Ratings

PDF manual · 61 Pages

English

M: QW-35-FL
page

/ 61

Loading...
88cd4d0729df7dfbc57ba6165491849d87f2 page 8
R1 Smart Cycling Helmet | 8
SAFETY PRECAUTIONS
MENU
• The protective capability of your helmet will diminish over time, dependent
upon many factors such as physical damage, exposure to pollution, harmful
chemicals and long term exposure to the sun. Sena recommends that the helmet
be replaced after five years. Although the shell is in principle capable of a longer
service life, the occurrence of material fatigue and wear to other components,
as well as the overall action of the helmet and the unknown conditions in which
the helmet has been used, make it advisable for your own safety to replace the
helmet after this period of use.
• Do not use product for extreme uses such as downhill racing at high speeds,
jumping or leaping with a fully suspended bicycle, snow sports, water sports,
motor sports, street hockey, playground activities, or other activities where face,
ear, or greater protection or coverage is desired.
• The safety helmet is designed to absorb only one impact and damage from
an impact is rarely visible from the outside. It is therefore essential to replace
the helmet after a fall, accident or other violent impact. Such helmet should be
returned to original place of purchase for inspection, or destroyed and replaced.
In the event of any impact, do not use this helmet.
• Any helmet that has been subjected to a violent impact should be replaced.
• To provide maximum protection, the helmet must fit properly on the head and its
chinstrap securely fastened under the chin.
• Always fasten the chinstrap before setting off and check that the buckle system
and straps are correctly in position.
• Never ride with the buckle unfastened or incorrectly adjusted. The chinstrap must
be correctly positioned and must not come loose when pulled.
• No helmet provides absolute protection from all conceivable impacts. This
helmet has been specially developed for bicycle riding and is unsuitable for other
purposes.
• Examine the helmet for damage at regular intervals. Small scratches will not
impair the protective function of your helmet.
• Check for proper fit and adjustment often, including each time you wear it, and
periodically during use.
• Always make sure the buckle is properly fastened and the loose end of the
chinstrap is tucked through the rubber “O” ring before you ride. Failure to follow
this instruction could result in serious personal injury.
• The helmet safety mechanism described above can also cause small cracks in the
shell when the helmet is dropped from a small height (less than 1 meter).
• Use of the product at a high volume for a long period of time may damage your
eardrums or hearing ability.
• Do not wear anything underneath your helmet, such as a cap, hood, bundled hair,
headphones, or barrettes, as the helmet may loosen or come off. Do not wear
anyone else’s helmet and don’t loan your helmet to anyone else.
• When relevant, follow all regulations regarding the use of the camera.
(1) Do not use your camera in an aircraft, unless permitted.
(2) Turn off the camera when you are near medical equipment. Your camera can
cause interference with medical devices in hospital or healthcare facilities.

Chat with your SENA R1 manual using AI

Get instant AI answers from your SENA R1 manual

Ask anything about the SENA R1. Answers come from this manual, with the pages they are based on.

R1 Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace helmet

Sena recommends replacing the helmet after five years due to material fatigue and wear, even if no damage is visible.

Before every ride
Check helmet fit and strap

Verify that the helmet sits correctly and securely on your head and that the chin strap is properly fastened before starting to ride.

After impact
Replace helmet after crash

Replace the helmet immediately after any fall, accident, or impact, as internal damage may not be visible.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend R1?

Yes No

Frequently Asked Questions

A

Enter the configuration menu by holding the middle button for ten seconds. Navigate to 'Phone Pairing' using the plus or minus buttons and press the middle button to execute. Activate Bluetooth on your phone, select 'Sena R1' from the list, and enter the PIN code 0000 if prompted.

Is this answer helpful?

A

No, the SENA R1 is designed exclusively for bicycle use. Using it for motorcycles or motorized vehicles voids the warranty and compromises safety certifications. It does not meet the impact resistance standards required for motorcycling.

Is this answer helpful?

A

The battery provides approximately 10 hours of talk time and 20 hours of music playback under normal conditions. Charging takes about 2.5 hours using the provided USB cable. Battery life varies based on usage, temperature, and volume levels.

Is this answer helpful?

A

The helmet is water-resistant and can handle rain during normal cycling. However, it should not be submerged in water. After riding in heavy rain, wipe it dry and let it air out completely before storing to prevent moisture buildup inside the electronics.

Is this answer helpful?

A

Sena recommends replacing the helmet every five years due to material aging and environmental exposure. You must also replace it immediately after any accident or impact, as the protective foam may be compromised internally even if the shell looks intact.

Is this answer helpful?

A

Yes, you can pair up to four headsets together using the Multi-Com intercom feature. This allows a group conversation where everyone hears each other simultaneously. You can start a group session using the Group Intercom function by pressing the plus and minus buttons simultaneously.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Integrated Bluetooth 5.0 system with support for up to three-way intercom communication
  • Advanced Noise Control technology reduces wind and road noise for clearer audio
  • FM Radio tuner with automatic station search and preset memory capabilities
  • Meets international safety standards (CPSC and EN 1078) for cycling helmets
  • Removable and washable interior padding for enhanced hygiene and comfort
VS

Disadvantages

  • Helmet must be replaced after any single impact, even if no damage is visible
  • Limited to standard cycling activities; not suitable for motorsports or extreme jumps
  • Requires regular firmware updates via app to maintain optimal performance
  • Battery life may decrease significantly in extremely cold or hot weather conditions
  • No built-in camera; requires separate accessory for video recording functionality
M: QW-35-FL

Product Specification

Use case

Road bike, City

Visor

No

Sizes

50-55cm (S), 55-58cm (M), 58-62cm (L)

Weight

13.4 oz (M)

Features

Adjustment system, Bluetooth, integrated speakers, microphone

M: QW-35-FL

Product Description

SENA R1 Helm - Read, Download & Print Free

The SENA R1 Smart Cycling Helmet represents a significant leap forward in rider safety and connectivity. Designed specifically for cyclists, this helmet integrates advanced Bluetooth technology directly into its structure, allowing riders to stay connected without compromising on protection. The device features a built-in microphone and stereo speakers that deliver crystal clear audio for music, phone calls, and intercom communication. Whether you are commuting through city traffic or embarking on a long weekend ride, the SENA R1 ensures you remain aware of your surroundings while enjoying your favorite content.

One of the standout features of this helmet is its versatile intercom system. Riders can pair up to three other users via Bluetooth, enabling group conversations over long distances. This makes it ideal for riding with friends or family, as everyone can communicate clearly even when wearing helmets. The system also supports FM radio functionality, allowing you to tune into local stations with ease. Advanced Noise Control technology automatically filters out wind and road noise, ensuring your voice is heard clearly during conversations. The helmet includes an intuitive button layout for controlling volume, tracks, and calls, along with voice prompts to guide you through settings.

Safety remains the top priority. The helmet meets rigorous certification standards for bicycle helmets in both the United States and the European Union. It features a quick-release buckle system for easy adjustment and secure fitment. The interior padding is removable and washable, maintaining hygiene after intense rides. However, users must adhere to strict maintenance guidelines, such as replacing the helmet every five years or immediately after any impact. Proper storage away from extreme heat and direct sunlight is crucial to preserve the integrity of the materials and the internal electronics.

Important Notes

  • Always wear the helmet correctly positioned low on the forehead for maximum protection.
  • Do not use the helmet for extreme sports like downhill mountain biking or jumping.
  • Replace the helmet immediately if it has sustained any impact damage.
  • Ensure the battery is charged using only approved chargers to prevent overheating.
  • Regularly check the fit and strap tension before every ride.
M: QW-35-FL

© Copyright 2026 Manual.ly