Manual.ly Logo

SENA M1 Manual

0.0 · 0 Ratings

PDF manual · 32 Pages

English

M: gpt-5.6-terra
page

/ 32

Loading...
c429c8c177756142694ed456882fc698f89a page 1f
M1 Smart Mountain Bike Helmet | 31
12. MAINTENANCE AND CARE
The inner lining of the helmet is completely removable. Its headliner
can be washed by hand using only water, mild soap, at a maximum
temperature of 30ºC (86ºF), and non-abrasive cloths to clean the
helmet’s shell, pads and retention system. Allow the padding to dry
at room temperature. Store the helmet in a dry, dark, well-ventilated
location, out of the reach of children and animals. High temperatures
(above 110ºF, 43ºC) may melt the helmet’s shell.
WARNING
• Never use gasoline, diesel fuel, thinners or solvents to clean the
helmet. These substances can cause serious damage to the helmet,
even though the resulting damage may not be visible. This helmet
can be damaged by contact with common substances (for example,
certain solvents (ammonia), cleaners (bleach), paints, abrasives)
and this damage may not be visible to the wearer. Do not use this
helmet if it has been exposed to such substances. The full safety
function of the helmet can no longer be guaranteed if exposed to
damaging substances.
• Do not store your helmet in your car or anywhere else near a heat
source. Do not use if the shell has been melted or deformed.
Always position the helmet so that it cannot fall to the floor.
Damage that occurs in this way is not covered by the warranty.
• Do not attach anything to your helmet, including mirrors or lights.
The shell of this helmet is constructed of expanded polystyrene foam.
Ventilation holes may allow harmful objects to pass in the helmet
interior.
The protective capability of your helmet will diminish over time,
dependent upon many factors such as dents, dings, and exposure to
pollution, harmful chemicals and long term exposure to the sun. Sena
recommends that helmets be replaced after five years.
Note: The useful life of your helmet may be less than five years as a
result of exposure to sunlight, rough, handling/storage that results in
dents or cuts or as a result of heavy use.
CHAPTER

Chat with your SENA M1 manual using AI

Get instant AI answers from your SENA M1 manual

Ask anything about the SENA M1. Answers come from this manual, with the pages they are based on.

M1 Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace the helmet

Sena recommends replacing helmets after five years due to diminished protective capability over time.

Show in the manual (page 31)
As needed
Wash the removable inner lining and pads

Hand wash with water and mild soap at max 30C (86F). Use non-abrasive cloths. Allow padding to dry at room temperature.

Show in the manual (page 31)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend M1?

Yes No

Frequently Asked Questions

A

The SENA M1 is a smart mountain bike helmet for recreational cycling. It combines head protection with Bluetooth communication, integrated audio, an FM radio, and a rear visibility light. It is not intended for activities requiring more extensive protection, such as downhill riding, large jumps, motorsports, or water sports.

Is this answer helpful?

A

The M1 can pair with up to three other Bluetooth intercom users. This allows one-to-one communication and conference conversations with up to four riders total. Smart Intercom Pairing in the Sena Utility App can simplify pairing with compatible users through QR codes.

Is this answer helpful?

A

Yes. The M1 can pair with a smartphone for calls, voice dialing, music, and app management. It also supports pairing a second phone or GPS device. Bluetooth pairing is typically needed only once for each device, provided the devices remain within range.

Is this answer helpful?

A

Yes. A red LED is built into the rear of the helmet to help riders stand out in traffic. The SENA button cycles through steady illumination, night-light mode, day-light mode, and off. Avoid repeatedly pressing the button too quickly.

Is this answer helpful?

A

A full charge takes approximately 2.5 hours, depending on the charging method. The Bluetooth system also supports quick charging: about 20 minutes of charging can provide up to five hours of communication. Do not wear the helmet while it is charging.

Is this answer helpful?

A

Hand-wash removable padding in water no warmer than 30 C with mild soap, then let it dry at room temperature. Use only a non-abrasive cloth for the shell and retention system. Store the helmet in a dry, dark, ventilated location away from heat, children, pets, solvents, fuel, bleach, and harsh chemicals.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Integrated Bluetooth speakers and microphone support calls, music, navigation audio, and rider communication.
  • Bluetooth intercom connects up to four riders, with HD quality available for two-way conversations.
  • Rear red LED offers steady, night-light, and day-light modes to improve visibility.
  • FM radio, smartphone app controls, firmware updates, and configurable settings add flexibility.
  • Quick charging can deliver up to five hours of communication after a 20-minute charge.
VS

Disadvantages

  • Designed for mountain biking and not approved for downhill, jumps, motorsports, water sports, or similar high-impact activities.
  • A helmet involved in an impact must be replaced, even if no external damage is visible.
  • Multi-way intercom temporarily interrupts the mobile phone connection.
  • HD Intercom is limited to two-way conversations and turns off during multi-way intercom use.
  • Heat, chemicals, improper storage, and normal wear can shorten helmet service life.
M: gpt-5.6-terra

Product Specification

Intended use

MTB

Visor

no

Sizes

21.65-22.83 in (M), 22.83-24.41 in (L)

Weight

0.95 lb (M)

Features

Adjustment system, rear light, Bluetooth, integrated speakers, microphone

M: gpt-5.6-terra

Product Description

SENA M1 Helm - Read, Download & Print Free

The SENA M1 Helm is a smart mountain bike helmet designed for riders who want dependable head coverage alongside built-in Bluetooth communication. Its integrated speakers, microphone, simple button controls, and rear LED light bring useful connectivity to recreational cycling without requiring a separate headset. The helmet is intended specifically for mountain biking and should be fitted securely, low on the forehead, for the best possible protection.

Connected riding made simple

Pair the M1 with a smartphone to handle calls, stream stereo music, use voice dialing, and access navigation audio while riding. Volume can be adjusted independently for each audio source, helping riders tailor their listening experience. The Sena Utility App provides convenient access to settings, music controls, FM radio functions, and device management from a compatible phone.

For computer-based setup and updates, the Sena Device Manager supports firmware updates and configuration. Keeping the helmet software current can help riders benefit from available improvements and adjust preferences such as language, voice prompts, FM information, and radio region.

Intercom for trail companions

The M1 supports Bluetooth intercom communication with up to three other users. Riders can create one-to-one conversations or join multi-way conference chats with up to four participants. Smart Intercom Pairing uses QR codes in the Sena Utility App to simplify connections with compatible riders. HD Intercom improves voice clarity during two-way conversations, while Universal Intercom can connect with one headset from another brand.

This communication capability is especially useful on group rides, where quick trail updates, route coordination, and safety reminders can be shared without stopping. Group Intercom also offers a fast way to reconnect with recently paired participants.

Visibility, entertainment, and everyday convenience

A red rear LED adds visibility in traffic and can be switched between steady, night-light, and day-light modes. The integrated FM radio lets riders scan, save, and move through stations, with regional frequency settings available through Sena software. Bluetooth music playback includes play, pause, track skip, and volume control directly from the helmet.

Charging takes about 2.5 hours, while a 20-minute quick charge can provide up to five hours of communication. The helmet should not be worn while charging. Its removable inner padding can be hand-washed with mild soap and cool water, while the shell should be cleaned using non-abrasive cloths.

Notes

  • Replace the helmet after an impact, even when damage is not visible.
  • Do not modify the helmet or expose it to high heat, solvents, or harsh chemicals.
  • Sena recommends replacing the helmet after five years, potentially sooner with heavy use or damage.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly