Manual.ly Logo

Schneider Electric Wiser Hub 2nd Generation Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
a892fd294c9690e7e7db689c633dca719d07 page 1
NNZ42658-01 07/23
en
Wiser Hub 2
nd
Generation
Prerequisites
Download the Wiser Home app to your smartphone, to
congure and control Wiser devices.
About this product
The Wiser Hub 2
nd
Generation (hereinafter known
as hub) is the central control unit of the Wiser Home
system. It monitors and controls the devices of your
home via the Wiser Home app.
Package contents
A Wiser Hub 2
nd
Generation
B 4x Rubber feet
C EU / UK Power adaptor
D Installation instructions
NOTE: The wall box, Wiser Wall Box Power Supply,
screw plugs and screws are not included in the pack-
age. They must be procured separately.
Operating elements
A Status LED
B Setup button
C USB-C port for AC adaptor
Removing the wall plate
NOTICE
EQUIPMENT DAMAGE
Use only a small at head screwdriver to release
the wall plate from the hub.
Failure to follow these instructions can result in
equipment damage.
NOTE: The wall plate is suitable for wall boxes with a
screw pitch of 53 mm, 60 mm and 84 mm.
Mounting
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION,
OR ARC FLASH
Safe electrical installation must be carried out only
by skilled professionals. Skilled professionals must
prove profound knowledge in the following areas:
• Connecting to installation networks.
• Connecting several electrical devices.
• Laying electric cables.
• Safety standards, local wiring rules and
regulations.
• Make sure that the 5 V DC power supply is turned
o󰀨 before making connections to the hub.
Failure to follow these instructions will result in
death or serious injury.
NOTICE
EQUIPMENT DAMAGE
• If the hub is mounted on the wall box, use the
Wiser Wall Box Power Supply (CCT501800-0001)
• If the hub is mounted on a wall or table, use only
the supplied AC adapter.
Failure to follow these instructions can result in
equipment damage.
NOTE: The arrows on the plate must face upwards.
Wall box (a.)
NOTE: The Wiser Wall Box Power Supply must
be pre-installed into the wall box. For more infor-
mation refer to the Wiser Wall Box Power Supply
(CCT501800-0001) installation instruction.
(1) Use a small screwdriver to discard the breakout
tab from the wall plate.
(2) Mount the wall plate on the wall box using
screws.
(3) Connect the wall box power supply cable to the
central channel of the hub.
(4) Mount the hub on the wall plate and make sure
that it is rmly secured.
Wall (b.)
NOTE: Use counter-sunk screws when mounting the
wall plate on a wall.
(1) Connect the AC adapter cable into the long
channel with the cable outlet on the top or
bottom of the hub.
(2) Mount the hub on the wall plate and make sure
that it is rmly secured.
Table
(1) A󰀩x the rubber feet (B) at the four corners on
the rear side of the wall plate.
(2) Place the hub on the table.
System User Guide
Scan the QR code to access the Wiser Home - Sys-
tem User Guide and choose your language to refer
complete information about the device, including
operation, conguration and using the system.
Technical data
Product code and
description:
CCT501800 Wiser Hub 2
nd
Generation
with UK power adapter
CCT501801 Wiser Hub 2
nd
Generation
with Europlug power adapter
Rated voltage: 5.0 V DC
Power consumption: Load: 5 W
Standby: 1 W
Operating temperature: 0 °C to 45 °C, indoor use only.
Storage temperature: -20 °C to 65 °C
Relative humidity: 10% to 90%, non-condensing
IP rating: IP20
Ball pressure test
temperature:
85 °C
Pollution degree: 2
Software class: A
Radio technology: Wi-Fi
®
: 2.4 GHz, IEEE802.11 b/g/n
Zigbee: 2.4 GHz, IEEE802.15.4
Radio frequency: Wi-Fi
®
: 2412 - 2472 MHz
Zigbee: 2405 - 2480 MHz
Max. radio-frequency
power transmitted:
Wi-Fi
®
: +17dBm (16 mW)
Zigbee: +12dBm (50 mW)
Certication: Zigbee 3.0
Power supply
Input voltage: 100 - 240 V AC, 50/60 Hz, 0.3 A max.
Output voltage: 5.0 V DC, 2 A, 10 W
Output connector: USB-C
CCT501800
CCT501801
ptesfr
deen
A B C D
60 mm 84 mm53 mm
B
1. Select Object > Generate
QR Code... to create a link
to the DUG chapter.
2. Place the generated QR
code and apply the Object
Style QR-Code_Frame.
3. Position the QR code
graphic over this text.
4. Size: 30x30 mm
x:35 mm Y: frame + 2 mm
en, ...
5
A
B
C
Privilégiez la répara�on ou le don de votre appareil !
Points de collecte sur www.quefairedemesdechets.fr
À DÉPOSER
EN DÉCHÈTERIE
OU
À DÉPOSER
EN MAGASIN
Cet appareil
et ses accessories
se recyclent
FR
Declaration of Conformity
Hereby, Schneider Electric Industries, declares that
this product is in compliance with the essential re-
quirements and other relevant provisions of RADIO
EQUIPMENT DIRECTIVE 2014/53/EU. and The Radio
Equipment Regulations SI 2017 No. 1206
Declaration of conformity can be downloaded on:
se.com/docs.
Schneider Electric Industries SAS
If you have technical questions, please contact the
Customer Care Centre in your country.
se.com/contact
UK Representative
Schneider Electric Controls
401 Southway Drive
Plymouth, PL6 6QT
United Kingdom
de
Wiser Hub (2. Generation)
Voraussetzungen
Laden Sie die Wiser Home App auf Ihr Smartphone
herunter, um Wiser-Geräte zu kongurieren und zu
steuern.
Über dieses Produkt
Der Wiser Hub (2. Generation) (nachstehend als Hub
bezeichnet) ist das zentrale Steuermodul des Wiser
Home Systems. Von hier aus werden Ihre Heimgeräte
über die Wiser Home App gesteuert.
Inhalt des Pakets
A Wiser Hub (2. Generation)
B 4 x Gummifüße
C Netzteil für EU / Großbritannien
D Installationsanweisungen
HINWEIS: Die Wanddose, das Wiser Unter-
putz-Netzgerät, die Schraubverschlüsse und die
Schrauben sind nicht im Lieferumfang enthalten. Sie
müssen separat erworben werden.
Bedienelemente
A Status-LED
B Setup-Taste
C USB-C-Anschluss für das Netzteil
Entfernung der Wandplatte
HINWEIS
BESCHÄDIGUNG DES GERÄTES
Nur einen kleinen Flachkopf-Schraubendreher
verwenden, um die Wandplatte vom Hub zu lösen.
Bei Missachtung dieser Anweisungen besteht
Beschädigungsgefahr.
HINWEIS: Die Wandplatte eignet sich für Wanddosen
mit einer Gewindesteigung von 53 mm, 60 mm und
84 mm.
Montage
GEFAHR
GEFAHR VON ELEKTRISCHEM SCHLAG,
EXPLOSION ODER LICHTBOGEN
Die sichere Elektromontage darf ausschließlich
von entsprechend geschultem Fachpersonal
durchgeführt werden. Das hierfür eingesetzte
Fachpersonal muss über umfangreiches
Fachwissen in den folgenden Bereichen verfügen:
• Anschluss an Installationsnetze
• Verbindung mehrerer elektrischer Geräte
• Verlegung von Elektroleitungen
• Sicherheitsstandards, vor Ort geltende Regeln
und Verordnungen zur Verlegung von Kabeln.
• Stellen Sie sicher, dass die 5 V DC-
Stromversorgung abgeschaltet ist, bevor Sie
Verbindungen zum Hub herstellen.
Die Nichtbeachtung dieser Anweisungen hat Tod
oder schwere Verletzungen zur Folge.
HINWEIS
BESCHÄDIGUNG DES GERÄTES
• Wenn der Hub in einer Wanddose montiert wird,
das Wiser Unterputz-Netzgerät (CCT501800-
0001) verwenden
• Wenn der Hub an einer Wand oder auf einem
Tisch montiert wird, verwenden Sie nur das
mitgelieferte Netzteil.
Bei Missachtung dieser Anweisungen besteht
Beschädigungsgefahr.
HINWEIS: Die Pfeile auf der Platte müssen nach
oben zeigen.
Wanddose (a.)
HINWEIS: Das Wiser Unterputz-Netzgerät zur Wand-
montage muss zuvor in die Wanddose eingebaut
werden. Weitere Informationen nden Sie in der In-
stallationsanleitung des Wiser Unterputz-Netzgeräts
(CCT501800-0001).
(1) Entfernen Sie mit einem Schraubenzieher die
vorgestanzte Ö󰀨nung aus der Wandplatte.
(2) Die Wandplatte mithilfe von Schrauben an der
Wanddose anbringen.
(3) Das Netzkabel der Wanddose über den
zentralen Kanal am Hub anschließen.
(4) Den Hub an der Wandplatte montieren und
sicherstellen, dass er gut befestigt ist.
Wand (b.)
HINWEIS: Für die Montage der Wandplatte an der
Wand Senkschrauben verwenden.
(1) Das Netzteilkabel an den langen Kanal mit
Kabelausgang oben oder unten am Hub
anschließen.
(2) Den Hub an der Wandplatte montieren und
sicherstellen, dass er gut befestigt ist.
Tisch
(1) Die Gummifüße (B) an den vier Ecken auf der
Rückseite der Wandplatte befestigen.
(2) Den Hub auf dem Tisch platzieren.
System-Benutzerhandbuch
Den QR-Code scannen, um auf das Wiser Home Sys-
tem-Benutzerhandbuch zuzugreifen, und die gewün-
schte Sprache auswählen, um ausführliche Angaben
zum Gerät (z. B. Betrieb, Konguration und Einsatz
des Systems) zu erhalten.

Chat with your Schneider Electric Wiser Hub 2nd Generation manual using AI

Get instant AI answers from your Schneider Electric Wiser Hub 2nd Generation manual

Ask anything about the Schneider Electric Wiser Hub 2nd Generation. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Wiser Hub 2nd Generation?

Yes No

Frequently Asked Questions

A

The Hub supports Wi‑Fi (2.4 GHz, IEEE 802.11 b/g/n) and Zigbee (2.4 GHz, IEEE 802.15.4, Zigbee 3.0), enabling communication with Wi‑Fi networks and Zigbee smart devices.

Is this answer helpful?

A

Yes. The hub supports mounting in compatible wall boxes (53, 60, 84 mm screw pitch) when paired with the Wiser Wall Box Power Supply (CCT501800‑0001), which must be installed separately by a qualified professional.

Is this answer helpful?

A

The Hub uses a 5.0 V DC, 2 A (10 W) USB‑C power supply. UK and Europlug adapter variants are provided depending on the product code (CCT501800/CCT501801). Use the supplied adapter for surface or table mounting.

Is this answer helpful?

A

No. The device is rated IP20 for indoor use only and should not be exposed to moisture or outdoor environments.

Is this answer helpful?

A

Scan the QR code included with the product or access the Wiser Home System User Guide online to find detailed, language‑specific instructions for setup, configuration, wiring notes and troubleshooting.

Is this answer helpful?

A

The Hub operates between 0 °C and 45 °C and supports 10% to 90% relative humidity non‑condensing. Storage range is −20 °C to 65 °C.

Is this answer helpful?

A

No. The Wiser Hub Gen2 only supports 2.4 GHz Wi‑Fi bands (2412–2472 MHz) and does not operate on 5 GHz Wi‑Fi channels.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Dual radio support (Wi‑Fi 2.4 GHz and Zigbee 3.0) for broad device compatibility.
  • Flexible mounting: wall box, surface wall or tabletop with included accessories.
  • Low power consumption: 5 W active and 1 W standby for energy‑efficient operation.
  • Simple pairing with status LED and setup button plus app control via Wiser Home.
  • Regulatory compliance and vendor support with downloadable conformity documents.
VS

Disadvantages

  • Indoor use only (IP20) — not suitable for outdoor or high‑moisture installations.
  • Requires qualified electrician for in‑box power supply installation.
  • Only 2.4 GHz Wi‑Fi supported; no 5 GHz network compatibility.
  • Wall box power supply (for recessed installs) is sold separately.
  • Limited physical I/O — relies on wireless endpoints and app for features.
M: OA-GPT-5-NAN

Product Specification

Type

Gateway

Standard

ZigBee 3.0, WLAN (802.11b/g/n)

Function

Gateway, Temperature

Dimensions

4.84x4.06x0.94 in

Special features

IP20, App controllable, Voice assistant (Amazon Alexa, Google Assistant, IFTTT)

M: OA-GPT-54-NAN

Product Description

Schneider Electric Wiser Hub Gen2, Gateway Manual

The Schneider Electric Wiser Hub Gen2 is the central gateway for the Wiser Home ecosystem, designed to connect, monitor and control smart home devices through the Wiser Home app. Compact and versatile, the Hub supports both Wi‑Fi (2.4 GHz) and Zigbee (2.4 GHz, Zigbee 3.0), serving as the communication bridge between your local network and Zigbee sensors, switches and automation devices. It ships with rubber feet and a USB‑C power adapter (UK or EU variants available), and can be mounted in-wall, on a wall surface or placed on a table for flexible installation.

The device features a status LED, a setup button for pairing, and a USB‑C input for the supplied 5 V DC, 2 A power supply. Rated power draw is low (5 W active, 1 W standby) and it's intended for indoor use within 0 °C to 45 °C. Mounting options include a compatible wall box (53/60/84 mm screw pitch) with an optional Wiser Wall Box Power Supply for flush installations, or standard surface/table mounting using the provided accessories. Installation notes emphasize safe electrical practices and that mains wiring and fixed wall power modules should be handled by qualified personnel.

Connectivity details include Wi‑Fi frequencies 2412–2472 MHz (max +17 dBm) and Zigbee frequencies 2405–2480 MHz (max +12 dBm). The unit conforms to regulatory directives for radio equipment and carries certifications relevant to Zigbee and Wi‑Fi operation. Technical specifications also list environmental limits, IP20 rating, and non‑condensing humidity range. A QR code in the packaging or documentation links to the system user guide offering step‑by‑step setup, configuration and troubleshooting guidance.

Use cases for the Wiser Hub Gen2 span centralized smart lighting control, sensor aggregation, and integration with app‑based automation scenes. The hub’s low standby power and broad radio compatibility make it suitable for homeowners seeking a reliable local automation core with secure app control. Installation flexibility (table, wall, or recessed box) supports retrofit and new‑build installations, and Schneider Electric’s compliance statements and support contacts provide additional assurance for professional and consumer deployments.

Notes:

  • Use only the supplied AC adapter for wall/table mounting; use the Wiser Wall Box Power Supply for in‑box installations.
  • Ensure 5 V DC is switched off before making electrical connections and follow local wiring regulations.
  • The wall plate supports specific screw pitches (53, 60, 84 mm); use countersunk screws for surface mounting.
  • Scan the QR code to access the full system user guide for language‑specific instructions and advanced configuration.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly