Manual.ly Logo

Schneider Electric Harmony XB4F Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
664aa11eedb2201ace9325afc4239b27ab4a page 1
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel.
No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
1/1
mm
2
AWG
0,22…1,5
24…16
0,22...2,5
24....14
0,22...2,5
24....14
6,8
0.27
6,8
0.27
mm
inch
For EU Declaration of Conformity see: www.schneider-electric.com
XB4Fpp / ZB4Fpp
X = 50 mm / 1.97 in
XB5Fpp / ZB5Fpp
X = 40 mm / 1.57 in
1
2
3
XB4Fpp / ZB4Fpp
XB5Fpp / ZB5Fpp
X = 50 mm / 1.97 in
4...6 mm
0.157...0.236 in
1...4,5 mm
0.039...0.177 in
DANGER
XB4Fpp / ZB4Fpp
1 2 3
4 5 6 7
2
1
1
3
4
6
7
0,8 Nm / 7.5 lb-in (maxi 1,2 Nm / 10.6 lb-in)
3
5
SPACER
For use on flat surface of a type 4, type 4X, type 12, and type 13
X
40 mm mini
1.57 in mini
+0.5
0
Ø30.75 mm recommended (Ø30.5 mm )
+0.0196
0
Ø1.21 in recommended (Ø1.20 in )
1...6 mm
0.039...0.236 in
XB4Fpp / ZB4Fpp / XB5Fpp / ZB5Fpp
www.schneider-electric.com
XB5Fpp / ZB5Fpp
1 2 3
4 5
ZB5 AZ905
2,2 Nm±0,2 / 19.5 lb-in±1.8
2
2
4
5
3
1
PHA3782000 01
10 - 2018
p
Install the product following the installation conditions described below.
p
Hole shape and diameter, tightening torques and spacer orientation must comply with these instructions.
p
The accessory ZB5AZ905 must be used to tighten the nut.
p
Ground the XB4Fpp / ZB4Fpp when installed on isolating support.
Failure to follow these instructions will result in death or serious injury.
HAZARD OF ELECTRIC SHOCK

Chat with your Schneider Electric Harmony XB4F manual using AI

Get instant AI answers from your Schneider Electric Harmony XB4F manual

Ask anything about the Schneider Electric Harmony XB4F. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Harmony XB4F?

Yes No

Frequently Asked Questions

A

The maximum tightening torque is 0.8 Nm for standard connections. When using the ZB5AZ905 accessory, the torque can reach 2.2 Nm plus or minus 0.2 Nm. Exceeding these limits may damage the unit.

Is this answer helpful?

A

This push button accepts wire gauges between 0.22 mm² and 2.5 mm². It also supports AWG sizes ranging from 0.22 to 160 depending on the specific configuration and terminal block used.

Is this answer helpful?

A

No, it is specifically designed for flat surfaces of Type 4, Type 4X, Type 12, and Type 13 enclosures. You must use the correct spacer to ensure a proper seal and fit.

Is this answer helpful?

A

Yes, grounding is mandatory if the XB4Fpp is installed on an isolating support. Failure to ground the unit creates a significant hazard of electric shock and voids safety compliance.

Is this answer helpful?

A

The recommended hole diameter is 30.75 mm with a tolerance of +0.0196 inches. A minimum of 30.5 mm is acceptable, but the larger size ensures optimal fit and stability.

Is this answer helpful?

A

Only qualified personnel should install, operate, service, and maintain this equipment. Schneider Electric assumes no responsibility for consequences arising from improper use or installation.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compact 30mm design saves valuable panel space
  • Clear blue color coding enhances operator identification
  • Compatible with multiple wire gauges up to 2.5 mm²
  • Robust construction suitable for harsh industrial environments
  • Easy integration with existing Harmony series components
VS

Disadvantages

  • Requires qualified personnel for safe installation
  • Strict torque limits necessitate careful handling
  • Specific spacer needed for certain enclosure types
  • Mandatory grounding increases installation complexity
  • Limited to specific voltage ranges defined by accessories
M: QW-35-FL

Product Specification

Type

Push button

Mounting type

Recessed

Frame

No

Bezel

No

M: QW-35-FL

Product Description

Schneider Electric Push Button Complete Harmony XB4F 30mm 1S Blue Manual

The Schneider Electric Push Button Complete Harmony XB4F 30mm 1S in blue is a robust component designed for industrial control panels. This specific model integrates seamlessly into the Harmony series, offering reliable manual operation for various automation tasks. The device features a 30mm diameter actuator that provides tactile feedback while maintaining a compact footprint on control surfaces. Its blue color coding helps operators quickly identify specific functions within complex machinery setups.

Installation requires precision and adherence to strict safety guidelines. Qualified personnel must handle all setup procedures to prevent electrical hazards. The unit supports wire gauges ranging from 0.22 mm² to 2.5 mm², ensuring compatibility with diverse wiring standards. Proper torque application is critical during mounting; tightening values should not exceed 0.8 Nm for standard connections or 2.2 Nm when using the specific ZB5AZ905 accessory nut. Using the correct spacer is essential for flat surface installations on Type 4, 4X, 12, and 13 enclosures.

Safety remains paramount when utilizing this equipment. Grounding the XB4Fpp series components on isolating supports is mandatory to mitigate shock risks. Failure to follow these protocols can lead to severe injury or death. The product includes detailed dimensional specifications, such as a recommended hole diameter of 30.75 mm, to ensure a snug fit without excessive play. This attention to detail guarantees long-term durability and consistent performance in demanding environments.

Important Installation Notes

  • Always use the ZB5AZ905 accessory for securing the nut properly.
  • Verify enclosure type before selecting the appropriate spacer.
  • Ensure all wiring complies with the specified gauge limits.
  • Adhere strictly to torque specifications to avoid mechanical failure.
  • Never operate without proper grounding on isolating supports.
M: QW-35-FL

© Copyright 2026 Manual.ly