Manual.ly Logo

Schneider Electric EVlink Home Smart Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 20

Loading...
c8f69680ebd6dbdcba725f7dfefd45ba6c36 page 4
GEX4292700-01_EN 4/20
Symbol Content
Electrical hazard
v The equipment must be installed, commissioned, serviced, and maintained only by qualied personnel.
v The installation should comply with existing standards and local regulations.
v See section "Installation" page 13 for details.
Electrical hazard / re hazard
v The charging station, the cable and the connector must be regularly checked by to detect any potential damage (visual inspection).
v In case the charging station is damaged, it must be immediately turned o󰀨 and replaced.
v Do not perform any maintenance work on the equipment.
v Do not open or modify the charging station.
v Do not remove signs such as safety symbols, warnings, nameplates, signs or markings.
b Do not use any extension cable to connect the charging station to the electric vehicle.
b Do not connect any other type of loads to the charging station (power tools, etc.). Only connect electric vehicles or their charging equipment.
b Do not disconnect the connector by pulling the cable. Hold the connector in your hand to disconnect the connector from the electrical vehicule.
b Do not bend, squeeze or tilt the connector so that it is mechanically damaged.
b Prevent the connector to be in contact with heat source, dirt or water.
b When using an integrated charging station to charge your electric car, please read the vehicle's tips and instructions carefully.
Failure to follow safety instructions can result in death, injury, and equipment damage.
b Never clean the charging point by spraying it with water (Hose for garden watering, high pressure cleaners, etc)
1
Contents
06/20
2
2
1/2
0
G
EX42
9
2700
-00_EN
E
Vlink H
om
e
-
EV
H
4
pppN
p
C
u
st
ome
r
C
a
re C
ent
er
en
U
se
r
ma
nual
EVH
4S03
N
2
EVH4S07N
2
EVH
4S11N
2
EVH
4A0
3N2
EVH
4A0
7N2
EVH
4A1
1N2
EVH
4S03
N
C
EVH
4S07
N
C
EVH
4S11NC
EVH4A0
3NC
EVH4A
0
7N
C
EVH
4A1
1N
C
G
E
X
42
927
00-
00_
E
N
06
/2022
1/20
G
EX429
27
00
-00
_EN
EVli
nk
H
ome -
EVH
4ppp
N
p
C
ust
ome
r
C
a
re
C
e
nt
e
r
en
U
s
e
r
manua
l
EVH
4
S
0
3N
2
EVH
4
S
0
7N
2
EVH
4
S
1
1N2
EVH
4
A
0
3
N
2
EVH
4
A
0
7N
2
EVH
4
A
11N
2
EVH
4
S03
N
C
EVH
4
S07
N
C
EVH
4
S11NC
EVH
4
A
0
3
N
C
EVH
4
A
0
7N
C
EVH
4
A
11NC
G
E
X
42927
00-
00_
E
N
M8x60 mm (5/16 x 2.36 in) wall plugs x 4
M6x50 mm (15/64 x 1.97 in) screws x 4
M6x12 mm (15/64 x 0.47 in) screws x 2
1 phase: ring terminals x 3
3 phase: ring terminals x 5
Crimping collar x 1

Chat with your Schneider Electric EVlink Home Smart manual using AI

Get instant AI answers from your Schneider Electric EVlink Home Smart manual

Ask anything about the Schneider Electric EVlink Home Smart. Answers come from this manual, with the pages they are based on.

EVlink Home Smart Maintenance Schedule

Regularly
Visually inspect charging station, cable and connector for damage

Check for potential damage. If damaged, turn off immediately and replace. Do not perform maintenance work or open the unit.

Between sessions
Store charging cable and connector securely

Wind cable around trough. Cover connector with dust cap if indoors; plug into socket if outdoors to prevent damage.

Show in the manual (page 15)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend EVlink Home Smart?

Yes No

Frequently Asked Questions

A

Installation must be carried out by a qualified electrician to ensure safety and compliance with local regulations.

Is this answer helpful?

A

The contractual warranty period is eighteen months from the date of purchase.

Is this answer helpful?

A

Yes, the Smart version allows remote control and monitoring via the Wiser application using Wi-Fi or Ethernet.

Is this answer helpful?

A

Yes, it features IP54 or IP55 protection ratings depending on the model, making it suitable for outdoor environments.

Is this answer helpful?

A

You can reset the PIN code using the eSetup for Electrician app provided by Schneider Electric.

Is this answer helpful?

A

Yes, it recommends using flexible cables with ring terminals or rigid cables within specific gauge limits for wiring.

Is this answer helpful?

A

Available power ratings include 3.7 kW single-phase, 7.4 kW single-phase, and 11 kW three-phase options.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Smart connectivity with Wi-Fi and Ethernet support for remote monitoring
  • High protection rating IP54 or IP55 for indoor and outdoor use durability
  • Emergency stop button and RDC filter added for enhanced safety levels
  • Flexible power options ranging from 3.7 kW to 11 kW for various needs
  • Simplified commissioning via eSetup app for electricians reduces setup time
VS

Disadvantages

  • Installation must be performed by a qualified electrician not DIY
  • Wi-Fi signal strength may vary in garages without repeaters
  • Undervoltage release requires separate installation for safety compliance
  • Requires specific wiring regulations and cable gauges to be followed
  • Socket models may require separate cable management for aesthetics
M: qwen/qwen3.5-flash-20260224

Product Specification

Number of Charging Points

1

Charging Mode

IEC 61851-1 (Mode 3)

Connection Type

Type 2

Mounting

Wall Mount

Authorization

No

Interfaces

RS-485, RJ-45, OCPP 1.6j, Wi-Fi (WLAN)

Color

White

Dimensions

11.10x16.10x5.83 in (WxHxD)

M: qwen/qwen3.5-flash-20260224

Product Description

Embrace Sustainable Living with Advanced EV Charging

Charging your electric vehicle at home requires a solution that balances speed, safety, and intelligence effectively. The Schneider Electric EVlink Home Smart series addresses these critical needs perfectly for modern residential setups. Whether you are installing this unit in a garage or on an exterior wall, the device offers a robust design suitable for various environments. Users often refer to the Schneider Electric EVlink Home Smart Manual to ensure correct configuration and wiring procedures are followed accurately. This guide focuses on the product capabilities and benefits for the end-user.

Smart Connectivity and Control

The Smart version distinguishes itself through advanced connectivity features that enhance user experience. It supports both Wi-Fi and Ethernet connections, ensuring reliable internet access for remote management capabilities. Owners can utilize the Wiser home ecosystem to schedule charging sessions based on energy tariffs and preferences. This flexibility optimizes costs and reduces strain on the electrical grid during peak hours. The eSetup Commissioning App simplifies the initial onboarding process for professional electricians significantly. Real-time status monitoring is available through LED indicators that signal readiness or active charging states.

Installation and Safety Engineering

Proper installation is absolutely critical for the longevity and safety of the entire unit. The system is wall-mounted and designed to operate within specific voltage ranges and phases. Installation height should be between 0.8 to 1.6 meters above the ground for optimal accessibility and cable management. Safety mechanisms include an easily accessible emergency stop button and Residual Current Direct Detection filters. These features prevent potential electrical hazards and ensure safety during operation. The unit is built to withstand outdoor conditions with an IP54 or IP55 rating depending on the model.

Durability and Versatility

This charging station comes in various power ratings to suit different vehicle battery capacities and needs. Options include 3.7 kW, 7.4 kW, and 11 kW models to match different grid capacities. Customers can choose between a tethered cable or a socket for greater flexibility in daily use. The device integrates seamlessly into existing electrical infrastructures with standard single-phase or three-phase connections. Environmental regulations are considered, with the unit being compliant with RoHS directives for material safety. The warranty period offers assurance of quality for eighteen months of continuous operation.

Conclusion

Selecting the right charging infrastructure impacts the overall ownership experience significantly. The EVlink Home Smart series provides a premium experience with high reliability and smart capabilities. Installation guides provide detailed wiring diagrams for professionals to ensure code compliance. By investing in this system, homeowners secure a sustainable future for personal mobility. It represents the intersection of electrical safety and convenient smart technology for the modern era.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly