Manual.ly Logo

Schneider Electric Acti9 iC60N Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
80a1772d80c17135ffb04749333d4e0da718 page 1
UPOZORNĚNÍ / FORSIGTIG! / VORSICHT / CAUTION / ATTENTION /
VIGYÁZAT / FORSIKTIG / UWAGA / OBSERVERA / UPOZORNENIE
iC60
Horní přívod / Indføring øverst / Speisung von oben / Top feeding / Alimentation par le haut /
Felső táplálás / Toppmontering / Przyłączenie od góry / Övre matning / Horný prívod
HRB1527402-00 1/2
cs
da
de
fr
en
hu
no
sv
pl
sl
NEBEZPEČÍ POŠKOZENÍ ZAŘÍZENÍ A ZRANĚNÍ OSOB
Na ovládání kluzných kontaktů nepoužívejte žádné nářadí.
Nedodržení těchto pokynů může mít za následek zranění nebo poškození zařízení.
GEFAHR VON MATERIALSCHÄDEN UND KÖRPERVERLETZUNG
Kein Werkzeug zum Betätigen der Schieber verwenden.
Die Nichtbeachtung dieser Anweisungen kann Körperverletzungen oder
Sachschäden zur Folge haben.
RISQUES DE DOMMAGES MATÉRIELS ET DE BLESSURES
Ne pas utiliser d'outil pour manipuler la barrette coulissante.
Le non-respect de ces instructions peut provoquer des blessures ou des
dommages matériels.
FARE FOR SKADER PÅ UTSTYR OG PERSONSKADER
Ikke bruk et verktøy til å flytte skyvekontaktene.
Hvis disse instruksjonene ikke følges, kan det medføre person- eller utstyrsskade.
NEBEZPEČENSTVO POŠKODENIA ZARIADENIA A ZRANENIA
Använd inte något verktyg på glidkontakterna.
Om inte anvisningarna följs kan person- och materialskador uppstå.
RISIKO FOR SKADER PÅ UDSTYR OG PERSONSKADE
Anvend ikke et værktøj til at betjene skyderne.
Manglende overholdelse af disse instruktioner kan medføre personskade eller
beskadigelse af udstyr.
HAZARD OF EQUIPMENT DAMAGE AND INJURY
Do not use a tool to operate sliders.
Failure to follow these instructions can result in injury or equipment damage.
KÉSZÜLÉKKÁR- ÉS BALESETVESZÉLY
Ne használjon szerszámot a kapcsolók működtetéséhez.
Az utasítások betartásának elmulasztása sérülést, vagy a berendezés
károsodásását okozhatja.
NIEBEZPIECZEŃSTWO OBRAŻEŃ I USZKODZENIA SPRZĘTU
Nie używać narzędzi do wkładania/wyjmowania wyłączników.
Nieprzestrzeganie tych instrukcji może spowodować obrażenia lub zniszczenie
urządzenia.
NEBEZPEČENSTVO POŠKODENIA ZARIADENIA A ZRANENIA
Na ovládanie klzných kontaktov nepoužívajte nástroje.
V prípade nedodržania týchto pokynov môže dôjsť k zraneniu alebo poškodeniu
zariadenia.
2
Click!
1
3
Click!

Chat with your Schneider Electric Acti9 iC60N manual using AI

Get instant AI answers from your Schneider Electric Acti9 iC60N manual

Ask anything about the Schneider Electric Acti9 iC60N. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Acti9 iC60N?

Yes No

Frequently Asked Questions

A

It is ideal for residential and light commercial three-phase circuits protecting lighting, socket outlets and small motors where a Type C tripping curve and 10A rating provide appropriate overload and short-circuit protection.

Is this answer helpful?

A

3P+N indicates three-phase poles plus a neutral pole. It allows simultaneous switching and isolation of all phases and neutral, improving safety during maintenance and ensuring clear fault disconnection across the whole circuit.

Is this answer helpful?

A

Yes, the iC60N is designed for standard DIN-rail mounting common in distribution boards. Ensure the enclosure and rail comply with local installation standards and that there’s adequate space and ventilation.

Is this answer helpful?

A

Follow prevailing installation regulations, confirm feeding orientation (top or bottom) before wiring, and never use tools to operate sliders or manual controls to avoid personal injury or device damage.

Is this answer helpful?

A

Yes. The iC60N family supports accessories like auxiliary contacts and shunt trips for remote signaling and control, enabling integration into monitored or automated electrical systems.

Is this answer helpful?

A

Type C trip curves tolerate moderate inrush currents but trip quickly on short circuits. This reduces nuisance trips on normal startup currents but still provides effective fault clearing for protective safety.

Is this answer helpful?

A

For earth leakage/ground-fault protection or specialized selective coordination, additional devices such as RCDs or upstream protective relays may be required depending on regulatory and application needs.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • 3P+N configuration allows simultaneous disconnection of phases and neutral for safer maintenance.
  • Type C curve offers suitable protection for lighting, outlets, and small motor loads.
  • Compact DIN-rail form factor simplifies installation in standard distribution boards.
  • Thermal-magnetic trip balances overload tolerance with fast short-circuit protection.
  • Accessory compatibility (shunt trip, auxiliary contacts) enables integration with control systems.
VS

Disadvantages

  • Fixed 10A rating may require stocking multiple variants for different circuits.
  • Type C characteristic can still cause nuisance trips on circuits with high inrush loads.
  • Requires correct feeding orientation (top/bottom) — installer error can affect operation.
  • Manual sliders must not be operated with tools; misuse risks damage or injury.
  • Not suitable as a substitute for specialized protective devices (e.g., earth leakage protection) without additional components.
M: OA-GPT-5-NAN

Product Specification

Type

AC

Number of poles

3 + N

Rated voltage

230V

Rated current

10A

Tripping characteristic

C

Width

2.83 in

Module units

4

M: OA-GPT-54-NAN

Product Description

Schneider Electric Circuit Breaker iC60N 3P+N 10A C Manual

The Schneider Electric iC60N 3P+N 10A C is a compact, reliable miniature circuit breaker designed for three-phase systems with neutral. Built for residential, commercial and light industrial electrical distributions, this model offers Type C tripping characteristics suitable for general-purpose protection of lighting circuits, socket outlets and small motor loads. Its 10A rating provides overcurrent protection while maintaining fast response to short-circuit conditions, ensuring both safety and continuity of service.

This breaker features a 3-pole plus neutral configuration, enabling simultaneous disconnection of all phases and neutral for safer maintenance and clear fault isolation. The iC60N series emphasizes ease of installation with standard DIN-rail mounting, clear labeling for top or bottom feeding, and user-friendly manual operation. The robust mechanical design and Schneider Electric’s testing ensure consistent performance across varied environmental conditions.

Beyond basic protection, the iC60N family offers compatibility with auxiliary accessories such as shunt trips, auxiliary contacts and locking devices, making it adaptable for integration into automated or monitored systems. Its thermal-magnetic trip unit provides a balance of long-time overload protection and short-time instantaneous tripping for fault clearing, reducing nuisance trips while protecting conductors and equipment.

For installers and technicians, the product manual highlights practical safety instructions: never use tools to operate sliders or manual controls, follow prevailing installation standards, and confirm wiring feeding orientation (top or bottom) before making connections. Schneider Electric recommends verifying the latest specifications prior to installation as standards and product details may evolve.

This iC60N 3P+N 10A C breaker is a dependable choice where compact size, clear neutral handling and versatile accessory support are important. Its established brand pedigree and compliance with installation norms make it a go-to component for safe, maintainable electrical distribution.

Notes

  • Ensure correct feeding orientation (top or bottom) per site wiring.
  • Do not operate sliders or controls with tools to avoid injury or device damage.
  • Confirm latest product specifications with Schneider Electric before procurement.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly