Manual.ly Logo

Schneider Electric Acti9 iC40N ARC Active Manual

0.0 · 0 Ratings

PDF manual · 10 Pages

English

M: OA-GPT-5-NAN
page

/ 10

Loading...
27ce55aa5f2478617e1442f72c840103f3b8 page 1
05/2021 1/10
GDE66872-00
Acti9 - iC40N ARC Active - A9TPpD6pp
en
Arc fault detection circuit breaker.
fr
Disjoncteur détecteur d’arc.
es
Interruptor automático con detector de arco eléctrico.
it
Interruttore magnetotermico con protezione da arco.
de
Fehlerlichtbogen-Schutzeinrichtung mit LS-Schutz.
PLEASE NOTE
b The installation, maintenance and eventual replacement of this device must only be
carried out by a qualied electrician.
b This device must not be repaired.
b All applicable local, regional and national regulations must be complied with during
the installation, use, maintenance and replacement of this device.
b This device should not be installed if, when unpacking it, you observe that it is
damaged.
b Schneider Electric cannot be held responsible in the event of non-compliance with
the instructions in this document and in the documents to which it refers.
b The service instruction must be observed throughout the life time of this device.
REMARQUE IMPORTANTE
b L’installation, l’entretien et le remplacement éventuel de cet appareil doivent être
e󰀨ectués uniquement par un personnel qualié.
b Cet appareil ne doit pas être réparé.
b Toutes les réglementations locales, régionales et nationales applicables doivent
être respectées lors de l’installation, l’utilisation, l’entretien et le remplacement de cet
appareil.
b Cet appareil ne doit pas être installé si, lors du déballage, vous observez qu’il est
endommagé.
b Schneider Electric ne peut être tenu responsable en cas de non-respect des
instructions contenues dans ce document et dans les documents auxquels il se réfère.
b Les instructions de service doivent être respectées tout au long de la durée de vie
de cet appareil.
TENGA EN CUENTA
b La instalación, el mantenimiento y el eventual reemplazo del equipo eléctrico solo
se debe realizar por personal cualicado.
b El equipo no debe repararse.
b Durante la instalación y el uso de este dispositivo, se deben cumplir todas las
normativas locales, regionales y nacionales aplicables.
b Este dispositivo no debe instalarse si, al desembalarlo, se observa que está
dañado.
b Schneider Electric no se hace responsable en caso de incumplimiento de las
instrucciones de este documento y de los documentos a los que se reere.
b Las instrucciones de uso se deben respetar durante toda la vida útil del producto.
NOTA
b Le operazioni di installazione, utilizzo, riparazione e manutenzione del presente
dispositivo elettrico devono essere eseguite esclusivamente da personale qualicato.
b Il dispositivo non deve essere riparato.
b Durante l’installazione e l’uso del presente dispositivo, è obbligatorio rispettare tutte
le normative locali, regionali e nazionali applicabili.
b Non installare il dispositivo se durante le operazioni di disimballaggio si nota che è
danneggiato.
b Schneider Electric non si assume alcuna responsabilità in caso di mancata
osservanza delle istruzioni riportate nel presente documento e nei documenti a cui
viene fatto riferimento.
b necessario rispettare le istruzioni di servizio per tutta la durata di vita del prodotto.
BITTE BEACHTEN
b Das elektrische Gerät darf ausschließlich von einem qualizierten Elektriker
installiert, verwendet, repariert und gewartet werden.
b Dieses Gerät darf nicht repariert werden.
b Bei der Installation und Verwendung dieses Geräts müssen sämtliche lokalen,
regionalen und nationalen Vorschriften eingehalten werden.
b Dieses Gerät darf nicht installiert werden, wenn Sie beim Auspacken
Beschädigungen feststellen.
b Schneider Electric kann keinesfalls für die Nichtbeachtung der Anweisungen in
dieser Anleitung oder Anweisungen in Dokumenten, auf die sie Bezug nimmt, haftbar
gemacht werden.
b Während der gesamten Produktlebensdauer müssen die Wartungsanweisungen
befolgt werden.
en fr es it de

Chat with your Schneider Electric Acti9 iC40N ARC Active manual using AI

Get instant AI answers from your Schneider Electric Acti9 iC40N ARC Active manual

Ask anything about the Schneider Electric Acti9 iC40N ARC Active. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Acti9 iC40N ARC Active?

Yes No

Frequently Asked Questions

A

The primary function is to combine arc fault detection (AFDD) with overload and short-circuit protection (LS) in a single 1P+N device rated 16 A, reducing fire risk from electrical arcs while protecting circuits from overloads and short-circuits.

Is this answer helpful?

A

A multi-function LED displays communication and fault diagnostics with color-coded statuses: identification and normal operation (green/orange), communication loss or failure (red), and specific trip causes such as parallel/series arc, overvoltage, or internal faults (blue codes and patterns).

Is this answer helpful?

A

No. Installation, maintenance, and replacement must be carried out only by a qualified electrician. The device must not be repaired; follow local regulations and Schneider Electric instructions. Replace any unit damaged during unpacking.

Is this answer helpful?

A

Run a self-diagnostic test after installation and at regular intervals by pressing the Test button. Before dielectric or insulation resistance testing, disconnect all input and output conductors. Follow service instructions for the device’s lifetime.

Is this answer helpful?

A

Yes. The product includes communication capabilities and a QR code for commissioning. It can pair with a concentrator and integrate with EcoStruxure Power Commission for system-level monitoring and diagnostics; consult the concentrator manual for configuration.

Is this answer helpful?

A

The unit is 1P+N, rated 16 A with a B-characteristic trip curve and a breaking capacity of 6000 A. It is intended for single-phase circuits; it is not suitable for three-phase or higher-current applications without appropriate product variants.

Is this answer helpful?

A

After ensuring safety by switching power off and verifying circuits are de-energized, use the VISI-TRIP diagnostic indicators and the Test/reset functions to identify the trip cause (arc, overload, short-circuit, overvoltage, or internal fault). Follow prescribed diagnostic steps or contact a qualified electrician.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Combines AFDD and LS protection for arc, overload, and short-circuit detection in one compact 1P+N device.
  • Integrated communication and QR-assisted commissioning simplify monitoring and system integration with EcoStruxure.
  • VISI-TRIP diagnostics and multi-function LED provide clear trip cause identification and communication status.
  • High safety profile reduces fire risk from arc faults and supports preventive maintenance via self-tests.
  • DIN-rail mounting and clear terminals enable straightforward installation in distribution boards.
VS

Disadvantages

  • Requires qualified electrician for installation and maintenance; not user-serviceable or repairable.
  • Communication depends on a concentrator for full system functionality, adding complexity and cost.
  • Limited to 16 A and 1P+N applications; not suitable for three-phase or higher-current circuits.
  • Dielectric tests and wiring require full isolation of conductors, increasing service time and precautions.
  • If damaged on delivery or mishandled, the unit must be replaced, creating potential supply chain downtime.
M: OA-GPT-5-NAN

Product Specification

Type

AC

Number of poles

1 + N

Rated voltage

230V

Rated current

16A

Tripping characteristic

B

Rated short-circuit capacity

6kA

Width

1.42in

Modular units

2

Special features

Neutral conductor left

M: OA-GPT-54-NAN

Product Description

Schneider Electric Acti9 iC40N ARC Active — AFDD + LS switch + comm., 1P+N, 16A, B-char., 6000A Manual

The Schneider Electric Acti9 iC40N ARC Active combines arc fault detection (AFDD) with a compact residual overcurrent and short-circuit protective switch (LS) and integrated communication. Designed for single-phase plus neutral circuits, this 1P+N device rated 16 A with B-characteristic and 6000 A breaking capacity delivers layered protection for modern residential and light commercial installations, reducing fire risk from arcing while maintaining overload and short-circuit safety.

Key product highlights

Built for safety and connectivity, the Acti9 iC40N ARC Active features an automatic VISI-TRIP diagnostic system that distinguishes arc, overvoltage, short-circuit, overload, and internal faults. A multi-function LED provides clear status and communication feedback (identification, normal communication, loss of communication, and fault conditions). The unit integrates DIN-rail mounting, clear power terminals, a QR code for commissioning and maintenance, and a test/reset button to run periodic self-diagnostics.

Why it matters

Arc faults are a major cause of electrical fires. By combining AFDD technology with traditional protection (LS), Acti9 iC40N ARC Active proactively detects dangerous arcing conditions and trips before hazardous escalation. The integrated communication features support system-level monitoring and easier commissioning with EcoStruxure Power Commission or dedicated concentrators, enabling preventive maintenance and traceable diagnostics.

Typical applications

Use this device in modern homes, renovation projects, small commercial premises, and sub-distribution boards where enhanced fire prevention and remote diagnostics are desired. The product is especially useful where circuits feed sensitive loads or where occupant safety and compliance with stricter electrical codes are priorities.

Operation and maintenance

Installation and maintenance must be performed by qualified electricians. The product includes user prompts and LED codes for pairing, normal operation, communication issues, and specific tripping causes (parallel arc, series arc, overvoltage, internal fault). Routine self-tests using the Test button are recommended after installation and at regular intervals. Always isolate power before wiring or dielectric testing.

Final thoughts

Schneider Electric’s Acti9 iC40N ARC Active offers a compact, standards-compliant solution that merges arc-fault detection, overload/short-circuit protection, and communication in a single module. It enhances safety, facilitates diagnostics, and supports modern connected electrical systems while demanding proper professional handling and adherence to regulatory requirements.

Notes:

  • Self-diagnostic tests must be run after installation and periodically.
  • Disconnect all conductors before performing dielectric tests.
  • Follow local regulations; do not attempt repairs—replace damaged units.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly