Manual.ly Logo

Sanitas SEM 43 Manual

4.7 · 18 Ratings

PDF manual · 72 Pages

English

M: OA-GPT-5-NAN
page

/ 72

Loading...
f70bd3ce08c669e24d3dc66f10c1417a8584 page e
14
7.4 Änderungen der Einstellungen
Veränderung Intensität (während der Anwendung)
•
+/-
und
+/-
: Veränderung der Intensität je Kanal
Unterbrechung der Stimulation
EIN/AUS-Taste drücken.
Anwendung ändern (komplett oder einzelne Parameter)
•
EIN/AUS : Unterbrechung der Stimulation
•
Einstellung der Programme siehe 7.2, Einstellung eigener Parameter siehe 7.3.
7.5 Doctor’s Function
Die Doctor’s Function ist eine spezielle Einstellung mit der Sie noch einfacher
und gezielter Ihr ganz persönliches Programm aufrufen können.
Ihre individuelle Programmeinstellung wird sofort beim Einschalten aufgerufen
und aktiviert.
Die Einstellung dieses individuellen Programms kann dabei z.B. durch Ratschlag
Ihres Arztes erfolgen.
Einstellen der Doctor’s Function
•
Wählen Sie Ihr Programm und die entsprechenden Einstellungen wie unter
7.2 bzw. 7.3 beschrieben aus.
•
Beim Start der Stimulationsbehandlung ist die Impulsintensität von und
standardmäßig auf 00 gestellt. Es werden noch keine Impulse an die
Elektroden gesendet. Bevor Sie mit den Intensitäts-Einstelltasten Ihre ge-
wünschte Impulsintensität einstellen, halten Sie die Taste
-
5 Sekunden
lang gedrückt. Die Speicherung in der Doctor’s Function wird durch einen
langen Signalton bestätigt.
Löschen der Doctor’s Function
Um das Gerät wieder freizugeben und wieder auf andere Programme zugreifen
zu können, halten Sie die Taste
-
abermals ca. 5 Sekunden lang gedrückt,
die Impulsintensität von und muss hierbei auf 00 gestellt sein. Die Lö-
schung der Doctor’s Function wird durch einen langen Signalton bestätigt.
8. Reinigung und Aufbewahrung
Klebeelektroden
•
Um eine möglichst langandauernde Haftung der Klebeelektroden zu gewähr-
leisten, reinigen Sie diese vorsichtig mit einem feuchten, fusselfreien Tuch
oder reinigen Sie die Elektrodenunterseite unter lauwarmem, fließendem
Wasser und tupfen Sie sie mit einem fusselfreien Tuch trocken.
Trennen Sie vor der Reinigung unter Wasser die Anschlusskabel von
den Elektroden.
•
Kleben Sie die Elektroden nach der Anwendung wieder zurück auf die Träger folie.
Reinigung des Gerätes
•
Entfernen Sie vor jeder Reinigung die Batterien aus dem Gerät.
•
Reinigen Sie das Gerät nach Gebrauch mit einem weichen, leicht angefeuch-
teten Tuch. Bei stärkerer Verschmutzung können Sie das Tuch auch mit einer
leichten Seifenlauge befeuchten.
•
Benutzen Sie zum Reinigen keine chemischen Reiniger oder Scheuermittel.
Achten Sie darauf, dass kein Wasser in das Gerät eindringt.
Aufbewahrung
•
Entnehmen Sie die Batterien aus dem Gerät, wenn Sie es längere Zeit nicht
benutzen. Auslaufende Batterien können das Gerät beschädigen.
•
Knicken Sie die Anschlussleitungen und Elektroden nicht scharf ab.
•
Trennen Sie die Anschlussleitungen von den Elektroden ab.
•
Kleben Sie nach Gebrauch die Elektroden wieder zurück auf die Träger folie.
•
Lagern Sie das Gerät an einem kühlen, belüfteten Ort.
•
Stellen Sie keine schweren Gegenstände auf das Gerät.
9. Entsorgung
Die verbrauchten, vollkommen entladenen Batterien müssen Sie über speziell
gekennzeichnete Sammelbehälter, Sondermüllannahmestellen oder über den
Elektrohändleentsorgen. Sie sind gesetzlich dazu verpflichtet, die Batterien zu
entsorgen.
Diese Zeichen finden Sie auf schadstoffhaltigen Batterien:
Pb = Batterie enthält Blei,
Cd = Batterie enthält Cadmium,
Hg = Batterie enthält Quecksilber.
Im Interesse des Umweltschutzes darf das Gerät am Ende seiner
Lebensdauer nicht mit dem Hausmüll entsorgt werden.
Die Entsorgung kann über entsprechende Sammelstellen in Ihrem Land
erfolgen. Entsorgen Sie das Gerät gemäß der Elektro- und Elektronik Alt-
geräte EG-Richtlinie – WEEE (Waste Electrical and Electronic Equipment).
Bei Rückfragen wenden Sie sich an die für die Entsorgung zuständige kommu-
nale Behörde.

Chat with your Sanitas SEM 43 manual using AI

Get instant AI answers from your Sanitas SEM 43 manual

Ask anything about the Sanitas SEM 43. Answers come from this manual, with the pages they are based on.

SEM 43 Maintenance Schedule

After each use
Clean adhesive electrodes

Clean with a damp lint-free cloth or rinse under lukewarm water and dry. Remove cables before washing.

Show in the manual (page 14)
After each use
Clean the device unit

Wipe with a soft slightly moistened cloth. Use mild soapy water if very dirty. Do not use chemicals.

Show in the manual (page 14)
When not used for a long time
Remove batteries from device

Take out batteries to prevent damage from leaking fluid during storage.

Show in the manual (page 14)
When worn
Replace adhesive electrodes

Replace if adhesion fails or skin irritation occurs due to uneven current distribution.

Show in the manual (page 14)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend SEM 43?

Yes No
0
User Pic

Sophie König

10 months ago

How long will the electrode pads last, and is the intensity adjustable so it's not too uncomfortable?

0
User Pic

Manual.ly

10 months ago

Pad life varies by skin and usage, but many users get several dozen sessions out of the included pads. To help them last: apply only to clean, dry skin (no creams/lotions), keep hair trimmed if needed, and after use rinse the pads with lukewarm water and let them dry flat. If the adhesive gets weak or sensation drops, it is time to replace the pads. Yes, the intensity is adjustable for both channels. Start at the lowest level, increase slowly until you feel effective but comfortable stimulation, and reduce or stop if anything feels too strong or painful. Follow the safety notes in the manual for sensitive areas.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

The device offers three core functions: TENS for nerve pain relief, EMS for muscle stimulation and training, and electrically generated massage modes. It includes 50 programs (10 TENS, 30 EMS, 10 massage) and allows parameter customization for specific needs.

Is this answer helpful?

A

Place electrodes to surround the treatment area with about 5–15 cm spacing. For surface muscles, align electrodes parallel to muscle fibers; for deeper tissues, place them across fibers. Use channel separation to surround pain points or treat bilateral sites simultaneously.

Is this answer helpful?

A

Yes. Do not use with implanted electrical devices (e.g., pacemakers), metal implants, insulin pumps, during pregnancy, with epilepsy, certain heart conditions, on inflamed or broken skin, or near the chest/heart. Consult your doctor for specific medical conditions before use.

Is this answer helpful?

A

Yes. Selected TENS (8–10) and EMS (28–30) programs are adjustable for frequency, pulse width and time. The Doctor’s Function lets you store one personalized program which is recalled and activated at startup.

Is this answer helpful?

A

Treatment time is adjustable from 5 to 100 minutes depending on program. Intensity for each channel can be changed during application; always increase gradually to a comfortable tingling without pain.

Is this answer helpful?

A

Clean adhesive electrodes with a damp lint-free cloth or lukewarm water underside, pat dry and store on their backing film. Replace electrodes when adhesion or performance degrades. Clean the device with a slightly damp cloth and remove batteries if unused for long periods.

Is this answer helpful?

A

The unit uses 3x AAA alkaline batteries (included). Supplied accessories: two lead cables, four 45x45 mm adhesive electrodes and a belt clip. Replacement electrodes and alternative sizes are available through service parts.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Dual independent channels let you treat two areas at once with different intensities.
  • Fifty preset programs (TENS, EMS, Massage) plus customizable settings for tailored therapy.
  • Wide parameter range (frequency, pulse width, intensity, time) for versatile clinical and fitness use.
  • Compact, battery-powered design with belt clip for portable home or travel use.
  • Clear safety guidance, electrode placement charts and Doctor’s Function for quick recall.
VS

Disadvantages

  • Not suitable for people with pacemakers, certain implants, pregnancy or epilepsy.
  • Requires correct electrode placement and maintenance; adhesives wear and need replacement.
  • Battery-powered only (3x AAA) — settings reset when batteries removed or replaced.
  • Not to be used near the heart, throat, or on broken/inflamed skin; several contraindications.
  • Signal tone cannot be turned off and device may be affected by nearby RF devices.
M: OA-GPT-5-NAN

Product Specification

Operating mode

Battery operated (3x AAA battery)

Therapy type

Transcutaneous electrical nerve stimulation (TENS)

Application area

Neck, Shoulders, Arms, Back, Hands, Legs, Feet

Massage heads

4

Intensity levels

44

Display

yes

Special features

Timer 55min (adjustable), Automatic shut-off

M: OA-GPT-54-NAN

Product Description

Sanitas SEM 43 TENS massage device Manual

The Sanitas SEM 43 is a compact digital EMS/TENS massage device designed to relieve pain, stimulate muscles and provide massage-like effects through transcutaneous electrical stimulation. Equipped with two independently controllable channels and four adhesive electrodes, the unit supports TENS (nerve stimulation), EMS (muscle stimulation) and a range of massage programs. It’s aimed at users seeking non-pharmacological pain management, muscle revitalization, recovery support and relaxation.

Key features and how it works

Digital biphasic pulse output minimizes muscle fatigue while delivering safe, effective stimulation. Users can choose from 50 built-in programs: 10 TENS, 30 EMS and 10 massage modes, or personalize selected programs. Adjustable parameters include pulse frequency (1–150 Hz for TENS, 1–100 Hz for EMS), pulse width (50–450 µs depending on mode), intensity (0–50), treatment time (5–100 minutes) and for some EMS modes, work/pause cycles. Two channels allow simultaneous, independently adjusted treatment of different body areas.

Applications include acute and chronic pain relief (back, joints, neuralgia, menstrual pain), muscle strengthening, endurance and recovery for sports use, muscle relaxation for tension and fatigue, and massage-style treatments to ease stiffness. The device mimics natural impulses via electrodes placed on the skin; typical sensations are gentle tingling or vibration. Clinical evidence supports TENS for various pain conditions, though any use should be reviewed with a healthcare professional.

Practical details and accessories

The SEM 43 runs on three AAA batteries and includes two lead cables, four self-adhesive electrodes (45 x 45 mm) and a belt clip. The display shows program, intensity per channel, frequency/pulse width, timer and lock status. Safety features include key lock, automatic shut-off after inactivity, and preset limits. Electrodes must be placed with recommended spacing (approximately 5–15 cm) and orientation relative to muscle fibers for optimal effect. The manual outlines contraindications (pacemakers, pregnancy, epilepsy, cardiac issues, metal implants, infected skin, near the heart, etc.) and extensive safety, battery and hygiene guidance.

Usage tips

Start with low intensity and increase gradually until a comfortable sensation is felt. Use both channels to cover bilateral areas or two separate sites simultaneously. For massage modes, use all four electrodes. Clean electrodes per instructions and replace when adhesion or performance declines. Consult a doctor before use if you have health conditions or are on concurrent medical treatments.

Notes

  • The device is intended for external use on adults and not as a replacement for medical care. Always consult a physician for unclear or serious conditions.
  • Avoid use near the heart, on the front chest wall, over the carotid sinus, cranial bones, throat, open wounds, inflamed skin, or during pregnancy.
  • Follow battery and disposal instructions; do not use rechargeable cells.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly