Salicru SPS Advance RT2 Manual
PDF manual · 32 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Salicru SPS Advance RT2 manual using AI
Get instant AI answers from your Salicru SPS Advance RT2 manual
Ask anything about the Salicru SPS Advance RT2. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend SPS Advance RT2?
Yes NoFrequently Asked Questions
The Salicru SPS Advance RT2 series is available in models ranging from 800 VA to 3000 VA. Each model has a specific wattage rating, typically around 720 W for the 800 VA model up to 2700 W for the 3000 VA model. Ensure your total connected load does not exceed these limits.
Is this answer helpful?
Yes, you can significantly extend the backup time by connecting optional external battery modules. These modules plug directly into the UPS and increase the total battery capacity, allowing for longer operation during power outages.
Is this answer helpful?
While the unit provides stable power, the documentation explicitly states it is not recommended for life-support systems or applications where failure could cause severe injury. It is best suited for general IT and office equipment rather than critical medical life-support devices.
Is this answer helpful?
You can monitor the UPS remotely using the free ViewPower software via the included USB or RS232 ports. For network-wide monitoring, you can install optional SNMP or Modbus communication cards to integrate the device into your existing network infrastructure.
Is this answer helpful?
If the battery fails or is disconnected, the LCD display will show error codes such as 'BATT FAULT' or 'NC'. The UPS will continue to operate in bypass mode if mains power is present, but it will not provide backup power during an outage until the battery is replaced.
Is this answer helpful?
Yes, the Salicru SPS Advance RT2 includes terminals for an Emergency Power Output (EPO). By connecting an external normally closed switch, you can instantly cut power to all connected devices in case of an emergency.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Pure sine wave output ensures compatibility with all sensitive electronics
- Flexible installation options include rack and tower mounting configurations
- Intelligent battery management extends battery life and optimizes charging
- Comprehensive connectivity with USB, RS232, and optional SNMP/Modbus cards
- LCD display with rotatable interface for easy monitoring from any angle
Disadvantages
- Internal batteries require replacement every three to five years depending on usage
- External battery modules must be purchased separately for extended runtime
- Requires specific grounding and cable sizing according to local electrical codes
- Fan noise may be audible in quiet environments during battery mode operation
- Initial setup requires careful configuration of battery capacity parameters for accuracy
Product Specification
Type
Tower/Rackmount
Classification
VI (Line-Interactive)
Voltage
208V-240V
Interfaces
USB, serial (RS-232)
Data Line Protection
2x RJ-45/RJ-11
Charge Time
4h (90%)
Height Units
2U
Depth 19" Chassis
N/A
Features
LCD, HID Support
Manufacturer Warranty
two years
Product Description
Salicru SPS Advance RT2: Reliable Power Protection for Your Critical Equipment
The Salicru SPS Advance RT2 series represents a robust solution for uninterrupted power supply, designed to safeguard sensitive electronic devices against the unpredictable nature of electrical grids. Ranging from 800 VA to 3000 VA, these line-interactive uninterruptible power supplies (UPS) deliver pure sine wave output, ensuring compatibility with a wide array of equipment including servers, medical devices, and home office setups. The system utilizes advanced Buck and Boost technology to stabilize input voltage fluctuations before they reach your connected loads, preventing damage from surges or sags.
One of the standout features of the Salicru SPS Advance RT2 is its flexibility in installation. Whether you need a vertical tower setup for a desk or a horizontal rack-mount configuration for a server room, the unit adapts seamlessly. The LCD display provides real-time status updates, allowing users to monitor battery levels, load percentages, and operational modes at a glance. The interface also supports rotation, making it easier to read information regardless of the installation orientation.
Connectivity is another key strength of this product line. Equipped with both USB and RS232 ports, the UPS can be easily integrated into computer networks for remote monitoring and control using the free ViewPower software. For more complex environments, optional communication cards support SNMP, Modbus RS485, and relay interfaces, enabling seamless integration into larger IT infrastructures. The inclusion of an Emergency Power Output (EPO) terminal adds an extra layer of safety, allowing for immediate shutdown in critical situations.
Battery management is optimized through intelligent charging algorithms that extend the lifespan of the internal lead-acid batteries. Users can further enhance autonomy by connecting external battery modules, providing extended runtime during prolonged outages. The system includes comprehensive protection against overloads, short circuits, and overheating, ensuring long-term reliability. With compliance to international standards like ISO 9001 and EN-IEC 62040, the Salicru SPS Advance RT2 stands as a trusted guardian for your power needs.
Key Considerations
While the Salicru SPS Advance RT2 offers exceptional performance, proper installation and maintenance are crucial for optimal operation. Always ensure adequate ventilation around the unit to prevent overheating. Regularly check battery connections and replace them every three to five years or as needed based on usage patterns. Adhering to the manufacturer's guidelines for grounding and cabling will maximize safety and efficiency.
Search for 67,706 Manuals online
Type-in Brand or Model