Manual.ly Logo

Sage SES810BSS The Duo Temp Pro Manual

4.8 · 6 Ratings

PDF manual · 28 Pages

English

M: claude-opus-5-5
page

/ 28

Loading...
6b7b06d6d19260dc7c085b1bfeb25a6d9963 page 16
21
CARE & CLEANING
MACHINE CLEANING
After regular use, residual grinds and oil
build up in the machine can affect coffee
extraction. We recommend performing a
cleaning cycle every 2-3 months using the
cleaning tablet provided.
To perform a cleaning cycle:
1. Insert the silicon disk into the
portafilter.
2. Place the cleaning tablet on the
silicon disk (position in the centre).
3. Insert the portafilter into the group
head and rotate to right to lock in
position.
4. Ensure Power On/Off button is on.
5. Turn the dial to the ‘Espresso’
position for 20 seconds.
6. Turn the dial back to the ‘Standby’
position.
7. Repeat steps 5-6 three times or until
the cleaning tablet is dissolved.
DESCALING
Even if you are correctly using the water
filter provided, we recommend you to
descale when you see scale build-up in
the water tank.
Visit Sage webpage to purchase
“the Descaler”.
1. Ensure the Control Dial is in the
‘Standby’ position, the machine is
switched off.
2. Remove the filter holder.
3. Empty one sachet (25g) into 1 litre of
warm water, stir to dissolve.
Pour solution into the water tank.
4. Press the POWER button to switch the
machine on.
5. Place a large container under both the
Group Head and the Steam Wand.
6. Set the Control Dial to the ‘Espresso’
position and let half the descale
solution run through the Group Head.
7. Set the Control Dial to the ‘Steam’
position and allow the remaining
solution to run through the Steam
Wand. When the liquid stops flowing,
set the Control Dial back to the
‘Standby’ position.
8. After descaling, remove the water tank
and rinse thoroughly then refill with
fresh cold water. To rinse the machine,
repeat steps 5 – 8.
20172069 P22 BES810BSS_UKM_IB_E17_HiRes.pdf color:2C K+PANTONE 518C ZB2382 DC:- SIZE:148X210MM August 18, 2017 14:18:34

Chat with your Sage SES810BSS The Duo Temp Pro manual using AI

Get instant AI answers from your Sage SES810BSS The Duo Temp Pro manual

Ask anything about the Sage SES810BSS The Duo Temp Pro. Answers come from this manual, with the pages they are based on.

SES810BSS The Duo Temp Pro Maintenance Schedule

Remind me when maintenance is due
Daily
Replace water in tank

Check the water level before use and replace the water daily. Fill with fresh, cold tap water.

Show in the manual (page 14)
Every 2-3 months
Perform cleaning cycle

Use a cleaning tablet and silicon disk in the portafilter to clean the group head and remove oil buildup.

Show in the manual (page 22)
Every 3 months or 40L
Replace water filter

Replace the water filter every three months or after 40 liters of use to reduce mineral buildup.

Show in the manual (page 21)
After each use
Clean steam wand

Wipe the steam wand after each use and run steam to clear milk from the wand.

Show in the manual (page 23)
Periodically
Rinse portafilter

Run water through the machine with the portafilter in place but without ground coffee to rinse out residual particles.

Show in the manual (page 21)
As needed
Descale machine

Descale when scale build-up is visible in the water tank using Sage Descaler solution.

Show in the manual (page 22)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend SES810BSS The Duo Temp Pro?

Yes No
0
User Pic

KaffeeFan99

6 months ago

Is this machine suitable for beginners, and do I need a separate grinder?

0
User Pic

Manual.ly

6 months ago

Yes, this machine is excellent for beginners. While it offers professional features like PID control and a powerful steam wand, it does require a good coffee grinder to achieve optimal results. A decent entry-level grinder combined with quality beans will allow you to make perfect espresso, cappuccino, and latte art.

M: QW-35-FL
M: QW-35-FL
0
User Pic

RepudiandaeCumque19

5 months ago

How difficult is it to learn how to use the steam wand for milk foam?

M: QW-35-FL

Frequently Asked Questions

A

You should replace the water filter every three months or after filtering 40 liters of water to reduce mineral build-up and maintain performance.

Is this answer helpful?

A

The Razor Precision Dose Trimming Tool levels the coffee puck to ensure the correct dose, leading to consistent extraction and better tasting espresso.

Is this answer helpful?

A

Yes, you can use pre-ground coffee by utilizing the advanced dual-wall filter baskets included with the machine to regulate pressure.

Is this answer helpful?

A

The pumping noise is normal operation caused by the 15 bar Italian pump working to pressurize water during extraction or steaming.

Is this answer helpful?

A

Mix one sachet of descaler with warm water, run half through the group head and half through the steam wand, then rinse thoroughly with fresh water.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Electronic PID temperature control for superior stability
  • Auto-purge function optimizes temperature between steam and espresso
  • Includes Razor Precision Dose Trimming Tool for consistency
  • Swivel steam wand allows easy milk texturing
  • Low pressure pre-infusion enhances flavor extraction
VS

Disadvantages

  • Water filter requires replacement every three months
  • Learning curve for achieving perfect milk texture
  • Machine takes time to reach operating temperature initially
  • Steam wand tip may require frequent cleaning to prevent blockage
  • No built-in grinder necessitates separate purchase
M: QW-35-FL

Product Specification

Power

1600 W

Color

silver

Pump Pressure

217.54 psi

Coffee System

Ground Coffee

Water Tank Capacity

0.53 gallons

Features

Steam Nozzle, Removable Water Tank

Dimensions

10.24x12.99x11.81 in (WxDxH)

M: QW-35-FL

Product Description

Sage SES810BSS The Duo Temp Pro Silver: A Barista Experience at Home

The Sage SES810BSS The Duo Temp Pro Silver is a sophisticated espresso machine designed to bring professional-grade coffee brewing into your kitchen. Engineered with precision, this appliance features a Thermocoil heating system that ensures water temperature stability for every shot. Its electronic PID temperature control allows for precise adjustments, while the low pressure pre-infusion gently expands coffee grinds before extraction begins, resulting in a more balanced and flavorful cup.

Designed with the user in mind, the Duo Temp Pro includes a swivel steam wand that easily adjusts to texture milk perfectly for lattes or cappuccinos. The machine comes equipped with the Razor Precision Dose Trimming Tool, which helps achieve consistent dosing by leveling the coffee puck. Whether you are using freshly ground beans with single-wall filters or pre-ground coffee with dual-wall baskets, this machine adapts to your needs. The auto-purge function automatically adjusts water temperature after steaming, ensuring optimal heat for your next espresso.

Safety is paramount, with built-in safeguards including a thermal cut-out to prevent overheating. The removable 1.8-liter water tank simplifies refilling, and the integrated water filtration system reduces scale build-up. With its sleek silver finish and compact design, it fits beautifully on any countertop while delivering café-quality results daily.

M: claude-opus-5-5

© Copyright 2026 Manual.ly