Manual.ly Logo

Sage Duo-Temp Pro SES810BSS Manual

4.8 · 6 Ratings

PDF manual · 116 Pages

English

M: QW-35-FL
page

/ 116

Loading...
fe9ebb8ad544b3c2ac3bca784ab8c7fb93c1 page a
10
CARE & CLEANING
The water lter provided helps to prevent
scale build up which over time can aect the
performance of your machine, potentially causing
blockages and heating problems.
Replacing the water lter every three months
will reduce the mineral build up in the machine.
If you live in a hard water area, we recommend you
change the water lter more frequently.
PORTAFILTER CLEANING
Periodically run water through the machine with the
portalter in place, but without any ground coee,
to rinse out any residual coee particles.
MACHINE CLEANING
After regular use, residual grinds and oil build up in
the machine can aect coee extraction.
We recommend performing a cleaning cycle every
2-3 months using the cleaning tablet provided.
To perform a cleaning cycle:
1. Insert the silicon disk into the portalter.
2. Place the cleaning tablet on the silicon disk
(position in the centre).
3. Insert the portalter into the group head
and rotate to right to lock in position.
4. Ensure Power On / O button is on.
5. Turn the dial to the ‘Espresso’ position for
20 seconds.
6. Turn the dial back to the ‘Standby’ position.
7. Repeat steps 5-6 three times or until the
cleaning tablet is dissolved.
DESCALING
Even if you are correctly using the water lter
provided, we recommend you to descale when
you see scale build-up in the water tank.
Visit Sage
®
webpage to purchase “the Descaler”.
1. Ensure the Control Dial is in the ‘Standby’
position, the machine is switched o.
2. Remove the lter holder.
3. Empty one sachet (25g) into 1 litre of warm
water, stir to dissolve.
Pour solution into the water tank.
4. Press the POWER button to switch the
machine on.
5. Place a large container under both the
Group Head and the Steam Wand.
6. Set the Control Dial to the ‘Espresso’
position and let half the descale solution
run through the Group Head.
7. Set the Control Dial to the ‘Steam’ position
and allow the remaining solution to run
through the Steam Wand. When the liquid
stops owing, set the Control Dial back
to the ‘Standby’ position.
8. After descaling, remove the water tank
and rinse thoroughly then rell with fresh
cold water. To rinse the machine, repeat
steps 5-8.
AUTO OFF MODE
The machine automatically switches to AUTO OFF
mode after 20 minutes.
INSTALLING / REPLACING THE
FILTER IN THE WATER TANK
Set current month Remove lter from
bag and soak for
5min
Assemble water
lter parts
Ensure parts are
connected
Install lter in tank Install water tank Replace lter
after 90 days
or after 40L

Chat with your Sage Duo-Temp Pro SES810BSS manual using AI

Get instant AI answers from your Sage Duo-Temp Pro SES810BSS manual

Ask anything about the Sage Duo-Temp Pro SES810BSS. Answers come from this manual, with the pages they are based on.

Duo-Temp Pro SES810BSS Maintenance Schedule

Remind me when maintenance is due
Every 2-3 months
Perform cleaning cycle

Use a cleaning tablet on a silicone disk in the portafilter. Run espresso cycles until the tablet dissolves to remove oil buildup.

Show in the manual (page 10)
Every 3 months or 40L
Replace water filter

Replace the water filter cartridge every three months or after filtering 40 liters of water to prevent scale buildup.

Show in the manual (page 10)
Every use
Clean the steam wand

Run steam to clear milk from the wand after texturing and wipe it with a damp cloth after each use.

Show in the manual (page 11)
Regularly
Empty and clean the drip tray

Remove, empty, and wash the drip tray with warm soapy water at regular intervals. The base and cover are dishwasher safe.

Show in the manual (page 11)
Periodically
Rinse the portafilter

Run water through the machine with the portafilter in place but without coffee grounds to rinse out residual particles.

Show in the manual (page 10)
As needed
Descale the machine

Descale when visible scale build-up appears in the water tank. Use Sage Descaler solution following the manual's flushing steps.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Duo-Temp Pro SES810BSS?

Yes No
0
User Pic

alene79

6 months ago

Is this machine suitable for beginners, and do I need a separate grinder?

0
User Pic

Manual.ly

6 months ago

Yes, the Sage Duo is an excellent entry-level machine with solid build quality. While it works well on its own, we highly recommend pairing it with a good grinder (such as the Smart Grinder Pro) to achieve the best espresso results and crema. The milk frother requires some practice but can produce professional-quality foam once you are familiar with it.

M: QW-35-FL
M: QW-35-FL
0
User Pic

AVelit49

5 months ago

Why does my milk foam look bad? Is there a problem with the machine?

M: QW-35-FL

Frequently Asked Questions

A

Remove the filter from its packaging and soak it in a cup of water for five minutes. Rinse it under cold running water and insert it into the holder before sliding the tank back into place.

Is this answer helpful?

A

Single wall filters are for freshly ground coffee and allow you to experiment with dose and tamp. Dual wall filters are for pre-ground coffee and regulate pressure to optimize extraction automatically.

Is this answer helpful?

A

It is recommended to perform a cleaning cycle every two to three months using the provided cleaning tablets to remove oil and residue buildup from the group head and internal pathways.

Is this answer helpful?

A

No, we recommend using cold mains or town water. Highly filtered, demineralized, or distilled water can affect the taste of the coffee and may cause issues with the machine's design functionality.

Is this answer helpful?

A

If the coffee flows too slowly, your grind might be too fine or you have used too much coffee. Try adjusting your grind coarser or using the Razor tool to trim the dose down slightly.

Is this answer helpful?

A

Sage Appliances provides a two-year limited guarantee against defects caused by faulty workmanship and materials for domestic use in specified territories from the date of purchase.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Dual temperature control enables simultaneous brewing and steaming
  • Includes Razor precision dose trimming tool for consistent extraction
  • 15-bar Italian pump ensures professional-grade pressure
  • Water filter reduces scale buildup and extends machine life
  • Automatic shut-off feature enhances energy efficiency and safety
VS

Disadvantages

  • Requires regular cleaning cycles to maintain optimal performance
  • Steam wand may need frequent purging if left unused
  • Drip tray needs emptying after heavy use sessions
  • Not suitable for commercial high-volume environments
  • Descaling requires specific solution and careful handling
M: QW-35-FL

Product Specification

Power

1600W

Color

silver

Pump Pressure

217.56psi

Coffee System

Ground Coffee

Water Tank Capacity

0.53gal

Features

Steam Nozzle, Removable Water Tank

Dimensions

10.24x12.99x11.81in (WxDxH)

M: QW-35-FL

Product Description

Discover the Sage SES810BSS The Duo Temp Pro

The Sage SES810BSS The Duo Temp Pro in silver is a sophisticated espresso machine designed for home baristas who demand precision and style. This appliance combines robust performance with user-friendly features, making it an ideal centerpiece for any modern kitchen. Its sleek stainless steel finish not only looks elegant but also resists fingerprints and smudges, keeping your counter looking pristine.

At the heart of this machine lies a powerful 15-bar Italian pump that ensures optimal pressure for extracting rich, full-bodied espresso. The Dual Temperature Control system allows you to brew coffee and steam milk simultaneously without waiting, saving valuable time during your morning routine. Whether you prefer a classic shot or a creamy cappuccino, the Duo Temp Pro handles it all with ease.

Customization is key with the included Razor Precision Dose Trimming Tool. This accessory helps you achieve the perfect coffee puck every time by removing excess grounds, ensuring consistent extraction regardless of your grind size. The machine comes with both single-wall filters for freshly ground coffee and dual-wall filters for pre-ground options, offering flexibility for all types of users. Additionally, the integrated tamper simplifies the tamping process, promoting uniform pressure application.

Maintenance is straightforward thanks to the built-in water filter, which reduces scale buildup and protects the internal components. The machine includes a cleaning cycle function using tablets and clear instructions for descaling when necessary. Safety features are paramount, with automatic shut-off after 20 minutes of inactivity and thermal protection for the pump. The swivel steam wand provides professional-quality texturing, allowing you to create microfoam for latte art. With its intuitive control dial and LED indicators, operating the Sage SES810BSS is an enjoyable experience for both beginners and experts.

M: QW-35-FL

© Copyright 2026 Manual.ly