Manual.ly Logo

RUD RUDcompact Easytop Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: OA-GPT-54-NAN
page

/ 16

Loading...
f80d6ba79574120a1948bf8e0cb5ea8e5e68 page 5
5
DE
EN
DEMONTAGE 2
Spannvorrichtung greifen
und Stahlseil vollständig her-
ausziehen, das dann ausge-
hängt werden kann.
Das Ende des Stahlseils aus
dem farbigen Haken aushaken.
DEMONTAGE 3
Die Kette im Bereich der
Aufstandsfläche öffnen
(wenn möglich sollte kein
Kettenteil unter dem Rad sein).
Endglied der Außenkette aus
farbigem Haken aushängen.
DEMONTAGE 4
Kette am Laufnetz erfassen
und Seilring rüttelnd über die
Lauffläche ziehen, bis die
Verschlußteile sichtbar sind.
Verschlußteile (wie
Bildausschnitt) aushängen und
Kette nach außen ziehen, bis
sie auf der Fahrbahn liegt.
Kette um den Reifen nach
vorne ziehen oder aus der
Kette herausfahren.
DEMONTAGE 1
Fahrzeug so anhalten, dass
die Spannvorrichtung sich in
der abgebildeten Position
befindet.
Untere Spannvorrichtung
greifen und Hebel vom
Gehäuse der Spannvorrichtung
anheben, bis der Endanschlag
hörbar einrastet.
REMOVAL 2
Grasp the tensioning device and
completely extract the cable, which
is thus ready to be unhooked.
Unfasten the end fitting of the cable
from the coloured hook.
REMOVAL 3
Open the chain on the tyre tread
(if possible, no chain parts should
be under wheel). Detach the
end link of outer chain from the
coloured hook.
REMOVAL 4
Grab the chain by the chain mesh,
shake and pull over the tyre tread
until the connecting pieces of the
wire ring are visible, uncouple the
connecting pieces (see caption) and
pull the chain outwards, until it lies
on the road. Pull the chain around
the tyre or drive off the chain.
REMOVAL 1
Stop the car so, that the tensioning
device is in the position shown in
the picture.
Hold the lower tensioning device
and raise the lever from the
tensioning device casing until it
clicks into place (OPEN position).

Chat with your RUD RUDcompact Easytop manual using AI

Get instant AI answers from your RUD RUDcompact Easytop manual

Ask anything about the RUD RUDcompact Easytop. Answers come from this manual, with the pages they are based on.

RUDcompact Easytop Maintenance Schedule

After every use
Rinse and dry the chain

Rinse your chain in warm water after use and allow it to dry completely.

Show in the manual (page 14)
When wear exceeds 50%
Replace worn chains

Do not use the chain if links show more than 50% wear to avoid breakage.

Show in the manual (page 14)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend RUDcompact Easytop?

Yes No

Frequently Asked Questions

A

It is designed to improve tire traction in snow and ice by adding a compact snow chain setup around the wheel. The chain helps the vehicle maintain grip, especially when roads are slippery or winter conditions are severe.

Is this answer helpful?

A

The chain uses a lower tensioning device that helps pull the cable tight after the end fitting is connected. Once engaged correctly, it self-tightens to secure the fit around the tire tread and sidewall.

Is this answer helpful?

A

No. The chain must match the tire size fitted to the vehicle. The instructions stress checking compatibility before use so the chain can be mounted safely and function as intended.

Is this answer helpful?

A

The instructions specify a maximum speed of 50 km/h. Driving faster can increase wear, reduce safety, and affect how securely the chain stays in place.

Is this answer helpful?

A

Rinse them with warm water, let them dry completely, and store them properly. This helps reduce corrosion, keeps the parts working smoothly, and extends the life of the chain.

Is this answer helpful?

A

They should be replaced when the chain links are more than 50% worn. Excessive wear can lead to failure, reduced traction, and possible chain breakage during use.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact design supports easier handling and quicker setup on winter roads.
  • Automatic tensioning helps the chain stay secure with less manual adjustment.
  • Colored connection points make installation steps easier to follow.
  • Includes useful accessories such as gloves, spare links, and a control sheet.
  • Maintenance guidance helps extend product life and improve safety.
VS

Disadvantages

  • Must be installed carefully; the tensioner should not be used before the hook is connected.
  • Maximum driving speed is limited to 50 km/h with chains fitted.
  • Performance changes on dry roads, including longer braking distances.
  • Wear must be monitored closely; heavily worn links should not be used.
  • Fit depends on correct tire size and vehicle compatibility.
M: OA-GPT-54-NAN

Product Specification

Vehicle type

Car

Type

Snow chain

Retensioning

automatic

Tire clearance

0.47 in

Rim protection

yes

M: OA-GPT-54-NAN

Product Description

RUD RUDcompact Easytop Manual: A Practical Snow Chain Solution

The RUD RUDcompact Easytop Manual describes a compact, user-focused snow chain system designed to improve traction in winter conditions. It belongs to the RUDcompact family, a range that emphasizes easier handling, secure fitment, and reliable performance on snowy or icy roads. For drivers who need a dependable chain setup without overly complicated steps, this product stands out for its straightforward structure and clear mounting process.

At the core of the design is a combination of a wire ring, outer chain, colored hook points, and a tensioning device that helps draw the chain tight around the tire. The installation sequence is built to be logical: position the chain in front of the wheel, guide the colored end around the drive wheel, connect the locking parts, and then activate the tensioning mechanism. This approach reduces guesswork and helps users center the chain properly on the tire tread.

One of the most useful features is the automatic self-tightening behavior. After the cable is hooked in the correct place, the lower tensioning unit can be engaged so the chain tightens itself. That means less manual readjustment once the vehicle begins moving. The instructions also stress an important safety detail: the automatic tensioning should only be used after the orange hook or end piece has been connected correctly.

The product is also supported by practical ownership guidance. The text recommends checking tire compatibility before use, limiting speed to 50 km/h, and avoiding wheel spin. After driving, the chain should be washed with warm water, dried, and stored properly. If chain links are worn by more than 50%, the chain should no longer be used. These notes show that the system is intended not only for performance, but for long-term safe operation as well.

Another advantage is the complete accessory package mentioned in the instructions, which includes mounting gloves, spare links, and a control sheet. That makes the product feel ready for real-world winter use. The availability of repair service adds further value for drivers who want to extend the life of their equipment instead of replacing it immediately.

Notes

  • Always confirm the chain matches the tire size on your vehicle.
  • Follow your vehicle maker’s recommendations for chain use.
  • Inspect wear regularly and replace the chain when needed.
  • For best results, mount the chain before driving conditions become severe.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly