Manual.ly Logo

Rothenberger ECO Manual

5.0 · 17 Ratings

PDF manual · 32 Pages

English

M: OA-GPT-5-NAN
page

/ 32

Loading...
e52cea76ef20b904599265cfca57aeb5cdd3 page d
1313
FITTING AND CONNECTING THE APPLIANCE TO A GAS CYLINDER
The appliance may only be fitted to 5kg and 11kg gas cylinders.
- Place the mounting bracket on to the collar of the gas cylinder.
- Tighten the mounting screw so that so that it engages with the collar of the gas cylinder
and so that the appliance and the mounting bracket are securely fixed on the gas cylinder.
- Make sure that the gas cylinder valve and the appliance valve are closed.
- Check the condition of the hose and the pressure regulator each time you use the appliance.
Do not use a hose or regulator that show any sign of damage or deterioration.
- Connect the pressure regulator to the gas cylinder.
- Connect the gas hose to the pressure regulator and to the appliance connector. Make sure
that the hose is routed in such a way so that it is not twisted or subject to strain and so
that it can not come into contact with any parts of the appliance that may become hot.
- Open the gas cylinder valve. Check that all connections are air-tight. If necessary use a leak
detector spray or a soapy solution. If necessary, tighten the connections. Do not use the
appliance if you suspect that the system may be leaky.
CHANGING THE GAS CYLINDER
- The gas cylinder may only be changed outdoors, well away from sources of ignition and
other persons.
- Close the gas cylinder valve and the gas appliance valve.
- If the appliance has been in operation allow it to cool down completely.
- Unscrew and remove the gas regulator.
- Unscrew the mounting screw and remove the mounting bracket and the appliance from
the gas cylinder’s collar.
- Proceed as described in the ‘Fitting and connecting the appliance to a gas cylinder’
section.
Proceed as follows to light the appliance and adjust the flame:
- Place the appliance and gas cylinder assembly outdoors on a level and stable surface, well
away from any inflammable materials.
- Open the gas cylinder valve by turning the knob anti-clockwise.
- Push and hold the appliance’s knob and turn it to the highest setting.
- Models 035985 & 035987: Push the Piezo ignition button.
- Models 035984 & 035986: Light the appliance by applying a gas lighter to the section of
the ceramic grille furthest away from the valve.
- Hold the appliance’s knob depressed for approximately 20 seconds. If the flow of gas stops,
repeat the steps above.
- Once the flame is established the flame can be adjusted as required by turning the valve.
- To switch off the appliance extinguish the flame by closing the cylinder valve and subsequently
close the appliance valve.
1313
USING THE APPLIANCE
MAINTENANCE AND CLEANING
GB

Chat with your Rothenberger ECO manual using AI

Get instant AI answers from your Rothenberger ECO manual

Ask anything about the Rothenberger ECO. Answers come from this manual, with the pages they are based on.

ECO Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace pressure regulator

It is recommended to change the regulator within 5 years of the date of manufacture.

Show in the manual (page 12)
Before each use
Check hose and regulator condition

Check the condition of the hose and pressure regulator each time you use the appliance. Do not use if damaged or deteriorated.

Show in the manual (page 13)
As needed
Replace worn or damaged hoses

Worn or damaged hoses must be replaced immediately.

Show in the manual (page 12)
Before storage
Clean appliance thoroughly

Clean the appliance with water and mild detergent before putting it away, especially if not used for a long period.

Show in the manual (page 14)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend ECO?

Yes No
0
User Pic

nesciunt17

8 months ago

How does the heat distribution work on this infrared gas heater? Is it safe to place it under a table or does it blow warm air upward? Also, does it need a gas bottle as a stand?

0
User Pic

Manual.ly

8 months ago

The heater warms mainly by infrared, so you feel heat on nearby surfaces (often quicker than the surrounding air warming up). At the same time, there will be some warm air flow that rises upward, so for best comfort and to avoid heat buildup, do not place it under a table or in a confined area. Keep clearances around the unit as stated in the manual and ensure good ventilation. The device is designed to be used upright with a stable base/connection for the gas bottle. Use only the correct gas type and setup, and follow the safety instructions for the ignition and safety system.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It operates on butane (G30) or propane (G31) at 50 mbar pressure. Ensure the cylinder type and regulator match the heater specifications.

Is this answer helpful?

A

No. The heater is certified for outdoor use only and must be used in a well-ventilated outdoor area to avoid hazardous gas accumulation and carbon monoxide risk.

Is this answer helpful?

A

To light: mount the unit, open the cylinder valve, hold the control at high, use Piezo or a gas lighter at the ceramic grille (away from injector), hold for ~20 seconds until stable, then adjust. To extinguish: close the cylinder valve first, then the appliance valve.

Is this answer helpful?

A

The manufacturer recommends replacing the regulator within five years of manufacture. Inspect the hose regularly and replace it immediately if worn, cracked or damaged; ensure replacements comply with local standards.

Is this answer helpful?

A

Allow the heater to cool before cleaning; wipe with water and mild detergent. Clear clogged burners or tubes with compressed air. Store disconnected from the cylinder in a dry place. Never operate with a broken ceramic element and have repairs done by a qualified person.

Is this answer helpful?

A

Close the cylinder valve immediately, move the appliance away from ignition sources, and locate the leak using a soapy solution (never use a flame). Repair or replace leaking parts before reuse and contact a qualified technician if needed.

Is this answer helpful?

A

Yes. Use only supplied or authorised replacement parts and contact Rothenberger Industrial service or an authorised gas dealer for replacements and repairs. The manual lists regional service contact details.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Portable, bracket-mounted design fits 5 kg and 11 kg cylinders for easy setup.
  • Multiple models with optional Piezo ignition for convenient lighting.
  • Wide heat range (2.50–4.20 kW) suitable for small-to-medium outdoor spaces.
  • Supplied regulator and hose with clear safety and replacement guidance.
  • Robust safety instructions and CE conformity for intended markets.
VS

Disadvantages

  • Strictly outdoor use only—not suitable for domestic or indoor heating.
  • Requires regular hose and regulator inspection and eventual replacement.
  • Can become very hot; must not be touched during or immediately after use.
  • Limited hose length (max 0.5 m) restricts placement options on some sites.
  • No built-in safety shutoff for damaged ceramic element—device must be taken out of service.
M: OA-GPT-5-NAN

Product Specification

Nominal heat output

14,330.99 BTU/h

Fuel

Propane gas, Butane gas

M: OA-GPT-54-NAN

Product Description

Rothenberger ECO Gas Heater Manual: Overview and Product Description

The Rothenberger ECO Gas Heater is a compact, high-efficiency outdoor space heater designed for portable, non-domestic use. Available in model variants 035984–035987, it runs on butane (G30) or propane (G31) at 50 mbar and delivers a nominal heat output between 2.50 and 4.20 kW. Built for straightforward cylinder mounting (5 kg or 11 kg) with a secure bracket, harness and regulator connection, the heater is intended for workshops, construction sites, terraces, and other ventilated outdoor areas where robust, reliable heat is required.

Key features and build

The unit includes a 50 mbar constant-pressure regulator, a 400 mm gas hose with 1/4" BSP left-hand fittings, mounting bracket hardware and, on select models (035985 & 035987), a Piezo ignition system for easier lighting. The burner uses a 0.9 mm injector and a ceramic heating element/grille designed to radiate steady, even heat. Safety elements include a dedicated device valve, cylinder valve isolation, and a protective grill that must not be removed.

Use and operation

Assembly is simple: attach the heater to the cylinder collar using the supplied bracket and screw, connect the regulator and hose, and check all connections using a soapy solution or leak detector. Lighting is performed by opening the cylinder valve, holding the appliance control to the high position and using the Piezo button (on supported models) or a gas lighter applied to the ceramic grille away from the injector. Hold the control depressed for about 20 seconds to ensure flame stability, then adjust as needed. To shut down, first close the cylinder valve and then the appliance valve.

Safety and maintenance

This heater is for outdoor use only and must be operated in a well-ventilated area, away from walls, combustible materials and ignition sources. Regularly inspect and replace worn hoses and regulators (recommended replacement within five years). Never use a damaged ceramic element and never attempt repairs or modifications—seek qualified service. Clean with water and mild detergent after cooling; use compressed air to clear clogged burner passages. Store disconnected from the cylinder in a cool, dry place.

Applications

Ideal for temporary heating needs on outdoor job sites, market stalls, patios and other ventilated commercial or industrial environments where a portable, gas-powered heat source is required.

Notes

  • Not for domestic or indoor use. Always follow local gas appliance regulations.
  • Use only supplied or approved replacement hoses and regulators.
  • Replace regulator as recommended and recycle the device responsibly at end of life.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly