Manual.ly Logo

Rodcraft RC2377 Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: OA-GPT-5-NAN
page

/ 36

Loading...
4187abb54ec3de8365a1572fa5d5bc4ea590 page 3
1.Technical Data
Model
Drive
Torque
Free speed
Dimension
L x W x H
Air Consumption
Weight
Inner Hose Dia. Air Inlet
Sound pressure
L
pA
Sound power
L
wA
Vibrations
Working Max Average at load
a
hd
K
W
L
1 2 3 4 5 6 7 8 9 10
[inch]
[ft.lbs]
[Nm]
[ft.lbs]
[Nm]
[min-1]
[inch]
[mm]
[Nl/s]
[SCFM]
[kg]
[lb]
[inch]
[mm]
[inch]
[dB(A)] [dB(A)] [m/s²] [m/s²]
max. pressure 6.3bar(90psi)
a
h
: Vibration level, k Uncertainty ; L
pA
Sound pressure dB(A), K
pA
= K
WA
= 3 dB Uncertainty.
Declaration of noise and vibration statement (ISO 15744 and ISO 28927-2)
All values are current as of the date of this publication. For the latest information please visit www.rodcraft.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user. We, RODCRAFT PNEUMATIC
TOOLS , cannot be held liable for the consequences of using the declared values, instead of values reecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf. We
recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can
be modied to help prevent future impairment.
2. Machine type(s)
• This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.
• Please read the instructions carefully before starting the machine.
3. Operation
• Fix the accessories properly to the tool.
• Connect device as shown in Fig. 01 to a clean and dry air supply.
• To start the machine, pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.
• To switch rotation, turn the switch (B) as shown in Fig. 03.
• Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the
machine.
• To adjust output power, turn the regulator (B).
4. Lubrication
Motor Clutch
• Use an air line lubricator with SAE #10 oil, adjusted to two drops per minute. If an air line
lubricator cannot be used, add air motor oil to the inlet once a day.
Recommended lubricant : 8951011861
• Use synthetic clutch Grease 8951012205
Model
qty
3/8" RC2177 6.6 g / 0.23 oz
1/2" RC2267 10.8 g / 0.38 oz
1/2" RC2277 10.8 g / 0.38 oz
3/4" RC2377 20.6 g / 0.72 oz
3/4" RC2387 20.6 g / 0.72 oz
1" RC2405 20.6 g / 0.72 oz
5. Maintenance instruction
• Follow local country environmental regulations for safe handling and disposal of all components.
• Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised
dealer for advice on technical service or if you require spare parts.
• Always ensure that the machine is disconnected from energy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.
• High wear parts are underlined in the parts list.
• To keep downtime to a minimum, the following service kits are recommended :
Tune-Up Kit : see part list
6. Disposal
• The disposal of this equipment must follow the legislation of the respective country.
• All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
• Repair only by technical maintenance staff.
7. EC Declaration of conformity
We : Rodcraft Customer Center Langemarckstr.35 bis 45141 Essen- Germany
Machine type(s) : impact wrench
Declare that the product(s) : RC2177/RC2267/RC2277/RC2377/RC2387/RC2405 Serial Number : 001 -999
Origin of the product : Taiwan
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to “Machinery“ 2006/42/EC (17/05/2006)
applicable harmonised standard(s) : EN ISO 11148-6:2012
Name and position of issuer : Pascal Roussy (R&D Manager)
Place & Date : Saint-Herblain, 05/07/2018
Technical le available from EU headquarter. Pascal Roussy R&D manager CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain - France
Copyright 2018, Rodcraft
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Original Instructions
EN
English (English)
RC2350
impact wrench

Chat with your Rodcraft RC2377 manual using AI

Get instant AI answers from your Rodcraft RC2377 manual

Ask anything about the Rodcraft RC2377. Answers come from this manual, with the pages they are based on.

RC2377 Maintenance Schedule

Remind me when maintenance is due
Daily
Lubricate air motor inlet

If an air line lubricator cannot be used, add air motor oil to the inlet once a day using SAE #10 oil.

Every 3 months
Disassemble and inspect tool

If used daily, disassemble and inspect the tool every three months. Replace damaged or worn parts.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend RC2377?

Yes No

Frequently Asked Questions

A

The recommended maximum operating pressure for the RC2377 is 6.3 bar (90 psi). Operating above this pressure can damage the tool and void warranties.

Is this answer helpful?

A

Use SAE #10 air motor oil (recommended part 8951011861) via an inline lubricator set to two drops per minute for the motor. For the clutch, use synthetic clutch grease (part 8951012205); the RC2377 clutch quantity is about 20.6 g.

Is this answer helpful?

A

If used daily, disassemble and inspect the tool every three months, replacing damaged or worn parts. Regular lubrication and use of tune-up kits are recommended to minimize downtime.

Is this answer helpful?

A

No. The reverse switch must only be used after the drive spindle has come to a complete stop. Changing direction while the spindle is moving can damage internal components.

Is this answer helpful?

A

Connect the RC2377 to a clean, dry compressed air source with the correct inlet fitting and hose diameter as specified in the technical data. Maintain proper flow and an inline lubricator for optimal motor life and performance.

Is this answer helpful?

A

Maintenance and repair should be carried out by qualified personnel using only original spare parts. Using unauthorized parts may void the warranty and compromise safety and performance.

Is this answer helpful?

A

The RC2377 has declared noise and vibration values obtained under ISO testing. These values are for comparison only; actual workplace exposure may be higher. Implement hearing protection, vibration management and health surveillance where appropriate.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • High maximum torque suitable for heavy-duty professional applications.
  • Progressive trigger and regulator allow precise speed and power control.
  • Robust construction with recommended maintenance intervals to ensure longevity.
  • Compatible with standard air line lubricators and specified lubricants for easy servicing.
  • Conforms to EN ISO 11148-6:2012 and EU machinery directive for regulatory compliance.
VS

Disadvantages

  • High vibration and noise levels require monitoring and protective measures.
  • Requires regular lubrication and quarter‑strength maintenance every three months for daily use.
  • Reverse switch must be used only when spindle is fully stopped, slowing some workflows.
  • Needs a clean, dry compressed air supply and correct hose diameter to perform optimally.
  • Repairs must be performed by qualified personnel using original parts, adding service constraints.
M: OA-GPT-5-NAN

Product Specification

Type

Impact Wrench

Operating Pressure

91.37 psi

Air Consumption

34.33 cfm

No-load Speed

5,760/min

Torque

1438.25 ft-lb

Tool Holder

3/4" Square Drive

Special Features

Right/Left Rotation, Torque Preselection

Weight

7.72 lb

M: OA-GPT-54-NAN

Product Description

Rodcraft RC2377 Air Impact Wrench Manual

The Rodcraft RC2377 is a professional 3/4" air impact wrench engineered for heavy-duty fastening and removal tasks. With a maximum torque range tailored for demanding industrial and automotive applications, the RC2377 delivers reliable power and durability through a robust pneumatic motor and reinforced clutch design. Its high free speed and solid construction make it suitable for technicians who need consistent performance under continuous use.

Designed for professionals, the RC2377 pairs strong torque output with ergonomic handling and clear control features. The tool’s regulator and trigger offer progressive speed control, while a reversible switch enables quick direction changes—recommended only when the drive spindle has fully stopped to prevent damage. The wrench requires a clean, dry compressed air supply and benefits from an inline lubricator set to two drops per minute using SAE #10 oil for optimal motor life.

Maintenance and lubrication are emphasized: the RC2377’s clutch requires synthetic clutch grease (part number 8951012205) with a specified fill of approximately 20.6 g. Routine inspection every three months for daily-use tools is advised, and only original spare parts and trained technicians should perform repairs to preserve warranty coverage and tool integrity. Service and tune-up kits are recommended to reduce downtime and keep high-wear components in check.

Safety and regulatory information highlights noise and vibration characteristics measured to ISO standards; users should follow local rules for noise/vibration risk management and consider health surveillance where appropriate. Maximum operating pressure is 6.3 bar (90 psi), and recommended hose diameters and air inlet fittings are provided for maintaining correct air flow and tool performance.

Practical operation tips include securing accessories properly, connecting to a filtered dry air source, pulling the trigger to start (pressure on the trigger controls speed), and using the regulator to fine-tune output power. The reverse switch must only be used when the spindle is stationary to avoid damage. Disposal must follow local environmental regulations; damaged or poorly functioning units must be taken out of service.

The RC2377 is backed by Rodcraft’s conformity to relevant EU machinery directives and harmonized standards (EN ISO 11148-6:2012). Technical data, lubricants, part numbers and maintenance intervals are specified to help technicians keep the tool performing reliably in professional settings.

Notes

  • Use recommended lubricants: air motor oil SAE #10 (part 8951011861) and synthetic clutch grease (8951012205).
  • Maintain inline lubricator and inspect tool every 3 months when used daily.
  • Only qualified personnel should perform repairs using original parts.
  • Max operating pressure: 6.3 bar (90 psi).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly