Manual.ly Logo

Rodcraft RC2277 Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: QW-35-FL
page

/ 36

Loading...
8e86c1007e816c5b97abe4a255f798013d54 page 5
1.Technical Data
Model
Drive
Torque
Free speed
Dimension

Air Consumption

Inner Hose Dia. Air Inlet

L


L


Working Max Average Actual

K
W
L
1 2 3 4 5 6 7 8 9 10
   
[mm]
[Nl/s

[mm] [inch]
   
max. pressure 6.3bar(90psi)
a
h
: Vibration level, k Uncertainty ; L
pA
Sound pressure dB(A), K
pA
= K
WA
= 3 dB Uncertainty.
Declaration of noise and vibration statement (ISO 15744 and ISO 28927-2)
All values are current as of the date of this publication. For the latest information please visit www.rodcraft.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user. We, RODCRAFT PNEUMATIC
TOOLS , cannot be held liable for the consequences of using the declared values, instead of values reecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf. We
recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can
be modied to help prevent future impairment.
2. Machine type(s)
• This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.
• Please read the instructions carefully before starting the machine.
3. Operation
• Fix the accessories properly to the tool.
• Connect device as shown in Fig. 01 to a clean and dry air supply.
• To start the machine, pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.
• To switch rotation, turn the switch (B) as shown in Fig. 03.
• Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the
machine.
• To adjust output power, turn the regulator (B).
4. Lubrication
Motor Clutch
• Use an air line lubricator with SAE #10 oil, adjusted to two drops per minute. If an air line
lubricator cannot be used, add air motor oil to the inlet once a day.
Recommended lubricant : 8951011861
• Use synthetic clutch Grease 8951012205. Q'ty =
5. Maintenance instruction
• Follow local country environmental regulations for safe handling and disposal of all components.
• Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised
dealer for advice on technical service or if you require spare parts.
• Always ensure that the machine is disconnected from energy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.
• High wear parts are underlined in the parts list.
• To keep downtime to a minimum, the following service kits are recommended :
Tune-Up Kit : see part list
6. Disposal
• The disposal of this equipment must follow the legislation of the respective country.
• All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
• Repair only by technical maintenance sta󰀨.
7. EU Declaration of conformity
We : Desoutter GmbH, Edmund-Seng-Str. 3-5, 63477 Maintal, Germany
Machine type(s) : impact wrench
Declare that the product(s) : RC2277 Serial Number : 001 -999
Origin of the product : Taiwan
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to “Machinery“ 2006/42/EC (17/05/2006)
applicable harmonised standard(s) : EN ISO 11148-6:2012
Name and position of issuer : Pascal Roussy (R&D Manager)
Place & Date : Saint-Herblain, 01/09/2020
Technical le available from EU headquarter. Pascal Roussy R&D manager CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain - France
Copyright 2020, Rodcraft
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Original Instructions
EN
English (English)
RC2277 
impact wrench

Chat with your Rodcraft RC2277 manual using AI

Get instant AI answers from your Rodcraft RC2277 manual

Ask anything about the Rodcraft RC2277. Answers come from this manual, with the pages they are based on.

RC2277 Maintenance Schedule

Remind me when maintenance is due
Daily
Add air motor oil to inlet if no lubricator is used

If an air line lubricator cannot be used, add air motor oil to the inlet once a day.

Quarterly
Disassemble and inspect the tool

If the tool is used every day, disassemble and inspect it every three months. Replace damaged or worn parts.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend RC2277?

Yes No

Frequently Asked Questions

A

The Rodcraft RC2277 delivers a maximum torque of 900 Newton meters, making it ideal for heavy-duty fastening in metal, wood, and plastic.

Is this answer helpful?

A

You should use an air line lubricator adjusted to two drops per minute. If one is unavailable, add motor oil to the inlet once daily.

Is this answer helpful?

A

No, this product is designed exclusively for professional use and is not intended for general home do-it-yourself applications.

Is this answer helpful?

A

Changing the rotation direction before the drive spindle stops completely can damage the machine and void your warranty coverage.

Is this answer helpful?

A

Yes, if used daily, you must disassemble and inspect the tool every three months to replace damaged or worn parts immediately.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High torque output ranging from 60 to 900 Nm for versatile fastening tasks
  • Compact dimensions allow access to tight workspaces efficiently
  • Variable speed trigger provides precise control over operation
  • Durable construction suitable for professional industrial environments
  • Comprehensive international safety compliance documentation included
VS

Disadvantages

  • Requires consistent lubrication to maintain clutch and motor health
  • Potential risk of hand-arm vibration if not managed properly
  • Must be disconnected from air supply before any maintenance work
  • Regular inspection required every three months for daily usage
  • Warranty voided if unauthorized non-original parts are installed
M: QW-35-FL

Product Specification

Type

Impact wrench

Operating pressure

91.3 psi

Air consumption

26.8 cfm

No-load speed

8200 rpm

Torque

959 lbf-ft

Tool holder

1/2" square

Features

Forward/reverse, torque preset

Weight

4.41 lb

M: QW-35-FL

Product Description

Rodcraft RC2277 Pneumatic Ratchet Wrench Review

The Rodcraft RC2277 is a professional-grade impact wrench designed for heavy-duty applications in wood, metal, and plastic. This powerful tool delivers a torque range of 60 to 900 Newton meters with a free speed of up to 8200 RPM. Its compact design measures 194 by 185 by 70 millimeters, making it easy to handle in tight spaces while providing the raw power needed for demanding tasks.

Operating on a standard air supply, this wrench requires a clean and dry source connected via a 1/4 inch inner hose diameter. The maximum operating pressure is set at 6.3 bar or 90 psi. Users can easily control the direction of rotation using the dedicated switch and adjust the output power with the regulator. For optimal performance and longevity, regular lubrication is essential. It is recommended to use an air line lubricator with SAE #10 oil or add motor oil directly to the inlet daily if a lubricator is unavailable.

Safety is paramount when using this equipment. Always disconnect the air supply before performing any maintenance or inspection. If used daily, the tool should be disassembled and inspected every three months to replace worn parts. The manufacturer emphasizes that unauthorized parts void the warranty and may cause malfunctions. This tool is strictly for professional use and must be operated according to all safety guidelines to prevent hand-arm vibration syndrome.

Important Maintenance Notes

  • Use only original spare parts for repairs.
  • Disconnect from energy source before servicing.
  • Inspect tools every three months for daily use.
  • Follow local environmental regulations for disposal.
  • Replace high-wear parts immediately upon detection.
M: QW-35-FL

© Copyright 2026 Manual.ly