Manual.ly Logo

REV Ritter POWER TORCH L17-1405C Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: QW-35-FL
page

/ 12

Loading...
bbfe173f80f8dd5b1d3db283cffb11938891 page 5
9
REV Ritter GmbH
Frankenstr. 1-4 • 63776 Mömbris • Deutschland • www.rev.de
E-Mail: service@rev.de •
D
Service-Telefon: 00800 50 00 27 35*
*kostenfreie Service-Rufnummer, Mobilfunkpreise abweichend
GB
Dear Customer,
We’d like to thank you for purchasing our product. Please read the following operating instructions thoroughly
before using this product for the first time and keep it handy for future reference (S1).
Please check the product before use for any damage.
• The product conforms to the appropriate European CE directives (S2).
• This product conforms to the appropriate European safety standards.
GENERAL INFORMATION
• Please observe the technical specifications!
• Please follow this instruction manual and keep it in a safe place!
• Please pass on this instruction manual to a subsequent owner!
• Not to be used by children!
• Do not operate a defective product!
• Do not immerse in water or other liquids!
• The product is IP20 rated and suitable for use in dry interior spaces (S3).
• Never look directly into the LED light source! The light spectrum transmitted may contain blue components (S4).
• Do not operate with wet hands!
• The product is intended exclusively for household use or similar purposes. It must not be used for commercial
purposes!
• The light source in the luminaire is not replaceable. The entire luminaire must be replaced at the end of its
service life!
• The product may only be used only for the purpose for which it is intended, in accordance with this user manual!
• The product is only designed for use with the appropriate batteries.
• This product has no replaceable parts. Do not attempt to open or repair this product!
• The product is not suitable for rough use (e.g. construction sites)!
• Must not be used in areas that represent an explosion hazard (e.g. carpentry workshop, paintshop, or similar)!
• Do not operate the product when covered (S6). This could lead to a dangerous buildup of heat!
• Always set up at least 0.5m away from illuminated surfaces (S5)!
• Do not open the housing!
• If the cable is damaged, disconnect product from the power supply!
• Do not operate the product’s buttons with electrically conductive objects!
• The product is not intended for use by persons (including children) whose physical, sensory or mental abilities
are limited or who lack experience and knowledge! These persons may only use the product if they are
supervised by a person responsible for their safety, or if they have been inducted into how to use the product!
The supervision and use of this product must be carried out by a responsible person!
GENERAL SAFETY INSTRUCTIONS
• Do not use in the immediate vicinity of flammable materials!
INTRODUCTION
PROPER USE
LED work light Power Torch
Assembly and operating instructions
• Only use the supplied original parts!
• Never undertake repairs yourself. Repairs may only be carried out by the manufacturer or an authorised service
representative.
• Do not operate the product at, on or in the vicinity of open flames (e.g. candles)!
SAFETY INSTRUCTIONS FOR BATTERIES
• Do not attempt to revive batteries or rechargeable batteries by heating or similar measures. Primary batteries
must not be recharged as this can lead to electrolyte leakage, explosion or fire.
• Do not immerse batteries in water and store them in a dry, cool place, not a damp one.
• Do not throw batteries into a fire, do not open them nor solder or weld them yourself.
• Do not short-circuit batteries.

Chat with your REV Ritter POWER TORCH L17-1405C manual using AI

Get instant AI answers from your REV Ritter POWER TORCH L17-1405C manual

Ask anything about the REV Ritter POWER TORCH L17-1405C. Answers come from this manual, with the pages they are based on.

POWER TORCH L17-1405C Maintenance Schedule

As needed
Clean the housing and protective lens

Use a dry or slightly moist lint-free cloth. Do not use abrasive or solvent-based cleaners. Disconnect from power before cleaning.

As needed
Remove dirt to prevent overheating

Immediately remove all dirt from the housing or protective panel as it can lead to dangerous heat buildup.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend POWER TORCH L17-1405C?

Yes No

Frequently Asked Questions

A

No, this product is rated IP20 and is designed strictly for use in dry interior spaces. It is not waterproof and should not be exposed to moisture, rain, or outdoor conditions to avoid damage or safety hazards.

Is this answer helpful?

A

The runtime depends on the brightness setting. It lasts for 1 hour at 800 lumens and 2 hours at 400 lumens. Charging the battery takes approximately 4 hours using the provided USB cable.

Is this answer helpful?

A

No, the light source in the luminaire is not replaceable. If the LED reaches the end of its service life, the entire luminaire must be replaced according to the manufacturer guidelines.

Is this answer helpful?

A

The product uses a Micro-B type socket for the charging input. You should use the enclosed USB charging cable connected to a tested USB power supply unit with a maximum output voltage of 5V.

Is this answer helpful?

A

The product is intended for use in ambient temperatures ranging from 0 degrees Celsius to 50 degrees Celsius. Do not store or operate the light outside of this temperature range for safety.

Is this answer helpful?

A

No, this product has no replaceable parts. You must not attempt to open or repair the device yourself. Repairs must only be carried out by the manufacturer or an authorised service representative.

Is this answer helpful?

A

Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to hand them in to a collection point for environmentally friendly disposal.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Provides 800 lumens of bright illumination for various tasks.
  • Long LED lifespan of up to 20,000 hours for durability.
  • Convenient USB rechargeable battery with 4-hour charge time.
  • Wide 180-degree beam angle ensures even coverage.
  • Compact and lightweight design suitable for portability.
VS

Disadvantages

  • Not suitable for outdoor use due to IP20 rating.
  • LED light source is non-replaceable within the unit.
  • Maximum runtime is only 1 hour on full power setting.
  • Requires at least 0.5m distance from surfaces to avoid heat.
  • Cannot be repaired by the user, requires service center.
M: QW-35-FL

Product Specification

Power Source

Battery 3.7V 2.8Ah Li-Ion

Light Source

LED, 12.5W, daylight white (6500K), 800lm

Features

IP20, dimmable, hanging hook, rod lamp

Battery Life

2h

Dimensions (WxHxD)

3.74x14.57x3.74 in

Weight

1.15 lbs

Package Contents

USB charging cable, battery

M: QW-35-FL

Product Description

REV Ritter POWER TORCH LED Overview

The REV Ritter POWER TORCH LED Rechargeable Work Light offers a reliable lighting solution for various household tasks. Designed with a robust build and modern LED technology, this device ensures efficient illumination where needed without the hassle of complex wiring or external power cords. Homeowners often require portable lighting for workshops, basements, or general storage areas, and this specific product fits that niche perfectly for daily maintenance and project support.

Key Features and Specifications

Boasting 800 lumens of brightness, the light provides ample visibility for detailed work areas. The 12.5W LED consumes energy efficiently while lasting up to 20,000 hours of operation. With a beam angle of 180 degrees, it spreads light widely across the room effectively. The included battery supports a rechargeable cycle of 4 hours for full capacity. Users can monitor charging via an indicator light which turns green when the process is complete and red while charging. The luminous efficacy is rated at 64lm/W.

Usage and Safety Guidelines

This unit is rated IP20, meaning it is suitable for dry interior spaces only. It is not waterproof or designed for outdoor rugged use on construction sites. Users should never immerse the device in water or liquids. The light should be kept at least 0.5m away from illuminated surfaces to prevent overheating issues. Always unplug from the power supply before cleaning. Do not operate near flammable materials or open flames. The device conforms to European safety directives for protection class III.

Maintenance and Lifecycle

The light source is integrated and not replaceable internally. When the LED fails, the entire unit requires replacement due to the non-serviceable design. Avoid covering the device during operation to maintain safe heat levels within the housing. Battery disposal must follow local environmental regulations for lithium-ion cells. Clean with a dry cloth only. Do not use solvents. Ideal for DIY enthusiasts or home maintenance, this lamp balances performance with safety standards. It is compact at 95 x 370 x 95mm and weighs 523 grams. Ensure you store the manual for future reference and contact support for assistance with any technical queries regarding the product lifespan.

M: QW-35-FL

© Copyright 2026 Manual.ly