REV Ritter Orchestra SA-MC08-N04-D Manual
PDF manual · 36 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your REV Ritter Orchestra SA-MC08-N04-D manual using AI
Get instant AI answers from your REV Ritter Orchestra SA-MC08-N04-D manual
Ask anything about the REV Ritter Orchestra SA-MC08-N04-D. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Orchestra SA-MC08-N04-D?
Yes NoFrequently Asked Questions
The sensor uses one 3V CR1632 lithium battery, which is included in the delivery box.
Is this answer helpful?
No, this set is not designed for integration into existing wired bell systems.
Is this answer helpful?
The maximum range is 100m in open fields, but concrete walls and metal objects can drastically reduce this distance.
Is this answer helpful?
Press the Melody Forward button on the receiver for 5 seconds to reset it to factory settings.
Is this answer helpful?
No, it has an IP20 rating and is strictly for dry indoor environments only.
Is this answer helpful?
Yes, the volume can be adjusted independently using the Volume button on the receiver.
Is this answer helpful?
The sensor will stop transmitting signals until the battery is replaced with a new one.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Wireless design eliminates the need for complicated cabling during installation
- Supports up to 20 devices per receiver for extensive coverage options
- Customizable ring tones allow differentiation between multiple sensors
- Easy battery replacement with clear low-battery visual indicators
- Simple adhesive mounting requires no drilling or special tools
Disadvantages
- Range is significantly reduced by thick concrete walls or heavy metal structures
- Not compatible with existing wired bell systems; requires dedicated receivers
- Adhesive may fail over time if exposed to extreme heat or moisture
- Battery compartment cannot be opened for repair, making it non-serviceable
- Signal interference can occur if other radio products operate nearby
Product Specification
Type
Sensor
Standard
Radio Bus (434MHz)
Function
Close/Open Sensor, Warning Function
Features
IP20
Product Description
REV Ritter Orchestra Window Contact with Wireless Gong: A Seamless Security Solution
The REV Ritter Orchestra Window Contact with Wireless Gong represents a modern approach to home security and convenience. This opening and closing sensor is designed to integrate effortlessly into your daily life without the need for complex wiring or professional installation. By utilizing wireless technology, it allows homeowners to create a custom bell system that alerts you immediately when a window is opened or closed.
This device operates on a frequency of 433.92MHz, ensuring reliable communication between the transmitter attached to the window frame and the receiver gong placed anywhere within the house. The system boasts an impressive range of up to 100 meters in open fields, though users should be aware that structural elements like reinforced concrete walls can reduce this distance. The sensor features a blue indicator light that activates when the two parts are separated by more than one centimeter, signaling the trigger event to the compatible receiver.
Installation is straightforward and requires no tools beyond basic adhesive backing. Users simply peel off the protective film and press the components onto a smooth, clean surface. It is crucial to keep the gap between the magnetic part and the sender under 1cm for optimal performance. The unit runs on a single 3V CR1632 battery, which is included in the package. When the battery level drops, the indicator blinks twice rapidly after the standard activation blink, prompting a timely replacement.
One of the standout features of the REV Ritter Orchestra system is its flexibility. You can assign different ring tones to different sensors, allowing you to distinguish between various entry points. The coding process is user-friendly, enabling you to link up to 20 transmitters to a single receiver or vice versa. Whether you are securing a ground-floor window or adding a sensor to a home office door, this wireless solution provides peace of mind with minimal effort.
Important Notes
- Always remove batteries if the product will not be used for an extended period.
- Do not mount the sensor on metal surfaces as this interferes with the signal.
- Avoid direct sunlight and high humidity to preserve the adhesive strength.
- The product is intended for dry indoor use only (IP20 rating).
Pros and Cons
Pros
- Wireless design eliminates the need for complicated cabling during installation.
- Supports up to 20 devices per receiver for extensive coverage options.
- Customizable ring tones allow differentiation between multiple sensors.
- Easy battery replacement with clear low-battery visual indicators.
- Simple adhesive mounting requires no drilling or special tools.
Cons
- Range is significantly reduced by thick concrete walls or heavy metal structures.
- Not compatible with existing wired bell systems; requires dedicated receivers.
- Adhesive may fail over time if exposed to extreme heat or moisture.
- Battery compartment cannot be opened for repair, making it non-serviceable.
- Signal interference can occur if other radio products operate nearby.
Frequently Asked Questions
Q: What type of battery does the sensor require? A: The sensor uses one 3V CR1632 lithium battery, which is included in the delivery box.
Q: Can I connect this sensor to my old wired doorbell? A: No, this set is not designed for integration into existing wired bell systems.
Q: How far can the signal travel through walls? A: The maximum range is 100m in open fields, but concrete walls and metal objects can drastically reduce this distance.
Q: How do I reset the coding if I lose the pairing? A: Press the Melody Forward button on the receiver for 5 seconds to reset it to factory settings.
Q: Is the sensor waterproof? A: No, it has an IP20 rating and is strictly for dry indoor environments only.
Q: Can I change the volume of the chime? A: Yes, the volume can be adjusted independently using the Volume button on the receiver.
Q: What happens if the battery dies while the sensor is active? A: The sensor will stop transmitting signals until the battery is replaced with a new one.
Search for 67,706 Manuals online
Type-in Brand or Model