Manual.ly Logo

REV Ritter Orchestra DB500AC Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: QW-35-FL
page

/ 24

Loading...
bbb2f2db1da6555313603f7a5945341d9090 page 9
9
General information
Please thoroughly read the following operating instructions before placing the device
into service and keep for future reference. The bell button is suitable for operation in
protected outdoor areas and not in harsh environments. The wireless chime is intended
for installation in dry indoor areas (IP20).
Note
• The wireless chime is only designed for use with the appropriate batteries.
• This wireless chime set consists of a transmitter and a receiver.
• In combination with a receiver (gong), the motion detector offers you the opportunity to set up a bell
system without wiring.
• This set is not intended for integration into an existing bell system.
• The range between transmitter and receiver is maximum 100m in the open field. The radio signal
• is transmitted through walls, walls, furniture and other obstacles, but depends on the structural
conditions - walls, especially reinforced concrete walls, heat-insulating glazing and ceilings lead to a
reduction in range.
• Shielding caused by metal parts can severely impair reception, so that the signal cannot be
transmitted.
• For this reason, never attach the transmitter to metal surfaces.
• If the product is not in use for a long period of time, remove the batteries.
• The product has no replaceable parts. Do not try to open or repair the product.
Technical Data
Range (free field): max. 150m
Frequency: 433,92MHz
Frequency band: 433,05 – 434,79MHz
Max. transmission power: <10mW
Battery: Receiver: 3x 1,5V AA (not included in delivery)
Transmitter: 1x 12V 23A (included in delivery)
Degree of protection: Receiver: IP20 (for dry indoor use only)
Transmitter: IP55 (protected outdoor area)
Volume: 100dB (5-stage adjustable)
Number of melodies: 58 melodies for selection
Standby consumption: Receiver: <5mA
Rated input current: 0,033A
Rated input power: 2,6W
Degree of protection: Receiver: Protection class II
Transmitter: Protection class III (Safety Extra Low Voltage )
Safety Instructions for batteries:
• Incorrect polarity of the batteries can destroy the unit.
• Do not store batteries within reach of children, especially those that can be swallowed.
• Do not attempt to reactivate batteries by heating or similar measures.
• Primary batteries must not be charged as this can lead to electrolyte leakage, explosion or fire.
• Do not immerse batteries in water and store them in a dry and cool place, not in a damp place.
• Do not throw batteries into the fire, do not open them or solder or weld them yourself.
• Do not short-circuit batteries.
Set up
Chime: Insert the chime into a 230V~ power socket.
Bell push: Remove the mounting plate on the rear side by pushing it off the rear side of the bell push
(see illustration on the right). Open the battery compartment of the bell push using the enclosed
screwdriver. Remove the insulation strip in the battery compartment. Then, close the battery
compartment again.
GB

Chat with your REV Ritter Orchestra DB500AC manual using AI

Get instant AI answers from your REV Ritter Orchestra DB500AC manual

Ask anything about the REV Ritter Orchestra DB500AC. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Orchestra DB500AC?

Yes No

Frequently Asked Questions

A

In an open field, the maximum range is up to 150 meters. However, real-world range depends on obstacles like walls, furniture, and especially steel-reinforced concrete, which can reduce the effective distance.

Is this answer helpful?

A

No, the gong and bell push come factory-coded and ready to use immediately. You only need to recode them if you want to add new devices or reset the system.

Is this answer helpful?

A

Yes, you can assign up to 20 different transmitters, such as bell pushes or motion detectors, to a single receiver gong. Each transmitter can even be assigned a unique melody.

Is this answer helpful?

A

Yes, the bell push has an IP55 rating, making it suitable for protected outdoor areas. However, it is not designed for harsh environments or direct exposure to heavy rain without shelter.

Is this answer helpful?

A

You can adjust the volume and cycle through the 58 available melodies using the buttons on the gong. The last selected settings are automatically saved.

Is this answer helpful?

A

Metal surfaces and thick concrete walls can block or weaken the signal. If reception is poor, try moving the gong or transmitter to a location away from metal objects or dense structural barriers.

Is this answer helpful?

A

No, the product has no replaceable parts. Users should not attempt to open or repair the device themselves to avoid damage or safety hazards.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Wireless installation eliminates the need for complex wiring
  • 58 diverse melody options allow for personalized sounds
  • Outdoor-rated transmitter (IP55) withstands weather conditions
  • Factory pre-coded for immediate use out of the box
  • Expandable system supports up to 20 receivers per sender
VS

Disadvantages

  • Range significantly reduced by thick concrete walls or metal shielding
  • Gong requires proximity to a 230V electrical outlet
  • Batteries for the receiver are not included in the package
  • Product cannot be repaired or opened by the user
  • Signal interference possible from other nearby wireless devices
M: QW-35-FL

Product Specification

Type

Wireless Doorbell

Standard

Wireless Bus (434MHz)

Function

Alarm Function

Features

IP55, Battery Powered

M: QW-35-FL

Product Description

REV Ritter Orchestra Funk Bell: A Wireless Symphony for Your Home

Welcome to the world of effortless home signaling with the REV Ritter Orchestra Funk Bell. This wireless gong system represents a perfect blend of classic design and modern convenience, allowing you to install a sophisticated doorbell without the hassle of complex wiring. Designed for those who appreciate quality audio and sleek aesthetics, this set includes a receiver gong and a transmitter bell push, ready to create a harmonious welcome experience.

The REV Ritter Orchestra Funk Gong is engineered to deliver a rich, clear sound that can be heard throughout your home. With 58 selectable melodies, you can choose a tune that perfectly matches your personal style or the specific needs of your household. Whether you prefer a traditional ding-dong or a more contemporary chime, the volume is fully adjustable across five levels, ensuring it is audible yet not disruptive. The system operates on a robust 433.92MHz frequency, offering a maximum range of up to 150 meters in open fields, though walls and metal structures may affect this distance.

Installation is straightforward and user-friendly. The gong unit plugs directly into a standard 230V wall socket, while the outdoor-rated bell push is powered by a single 12V battery included in the box. The IP55 rating of the push button ensures durability against weather elements, making it suitable for protected outdoor areas. Meanwhile, the gong is rated IP20, intended for dry indoor spaces. The factory-coded pairing means you can start using the system immediately, but if you wish to expand your setup, the coding process allows you to link up to 20 transmitters to one receiver or vice versa.

This wireless solution is ideal for new installations or upgrading existing systems where drilling holes for wires is undesirable. It supports integration with other compatible devices like motion detectors and window contacts, creating a comprehensive smart entry system. By eliminating the need for cables, the REV Ritter Orchestra Funk Bell offers flexibility in placement, allowing you to position the gong exactly where the sound will be most effective.

Important Notes

  • Always remove batteries if the product will not be used for an extended period.
  • Do not mount the transmitter on metal surfaces as this blocks the signal.
  • Ensure the receiver is plugged into an accessible outlet for easy power disconnection.
  • Dispose of batteries and electronic waste according to local environmental regulations.
M: QW-35-FL

© Copyright 2026 Manual.ly