Manual.ly Logo

REV Ritter Orchestra DB500 Manual

5.0 · 1 Ratings

PDF manual · 13 Pages

English

M: QW-35-FL
page

/ 13

Loading...
10
9
General information
Please thoroughly read the following operating instructions before placing the device
into service and keep for future reference. The bell button is suitable for operation in
protected outdoor areas and not in harsh environments. The wireless chime is intended
for installation in dry indoor areas (IP20).
Note
• The wireless chime is only designed for use with the appropriate batteries.
• This wireless chime set consists of a transmitter and a receiver.
• In combination with a receiver (gong), the motion detector offers you the opportunity to set up a
bell system without wiring.
• This set is not intended for integration into an existing bell system.
• The range between transmitter and receiver is maximum 100m in the open field. The radio signal
is transmitted through walls, walls, furniture and other obstacles, but depends on the structural
conditions - walls, especially reinforced concrete walls, heat-insulating glazing and ceilings lead to a
reduction in range.
• Shielding caused by metal parts can severely impair reception, so that the signal cannot be transmitted.
For this reason, never attach the transmitter to metal surfaces.
• If the product is not in use for a long period of time, remove the batteries.
• The product has no replaceable parts. Do not try to open or repair the product.
Technical Data
Range (free field): max. 150m
Frequency: 433,92MHz
Frequency band: 433,05 – 434,79MHz
Max. transmission power: <10mW
Battery: Chime: 3x 1,5V AA (not included in delivery)
Bell push: 1x 12V 23A (included in delivery)
Degree of protection: Chime: IP20 (for dry indoor use only)
Bell push: IP55 (protected outdoor area)
Volume: 100dB (5-stage adjustable)
Number of melodies: 58 melodies for selection
Degree of protection: Safety Extra Low Voltage
Safety Instructions for batteries:
• Incorrect polarity of the batteries can destroy the unit.
• Do not store batteries within reach of children, especially those that can be swallowed.
• Do not attempt to reactivate batteries by heating or similar measures.
• Primary batteries must not be charged as this can lead to electrolyte leakage, explosion or fire.
• Do not immerse batteries in water and store them in a dry and cool place, not in a damp place.
• Do not throw batteries into the fire, do not open them or solder or weld them yourself.
• Do not short-circuit batteries.
Set up
Chime: Open the battery compartment and insert the batteries. Number and type of batteries refer to
“Technical Specifications”. Then, close the battery compartment again.
Bell push: Remove the mounting plate on the rear side by pushing it off the rear side of the bell push
(see illustration on the right). Open the battery compartment of the bell push using the enclosed
screwdriver. Remove the insulation strip in the battery compartment. Then, close the battery
compartment again.
Creating/deleting coding
Chime and bell push in this set were already coded in the factory. If you want to renew the coding or add
additional chimes/bell pushes, please proceed as follows.
GB
Coding the chime and bell button::
1. Before coding, select your preferable bell tone (refer to “Volume setting/Melody selection”).
2. Press the “Volume” button on the chime for 5 seconds. You will hear a ding-dong and the LED starts
blinking, to signalise that the coding mode is active.
3. Press the bell push, to send a signal to the chime. If the coding was successful, the chime will
automatically play back the bell tone.
Note:
• The coding mode is automatically terminated after concluding the coding.
• The coding mode is only active for 5 seconds.
• The coding mode is always only available for one receiver (chime) and transmitter
(bell push, motion detector, window contact) simultaneously. Repeat the above-mentioned coding if
you would like to code multiple receivers/transmitters.
• You can assign a different bell tone to each transmitter when coding and in doing so, create a call
differentiation.
• Up to 20 receivers (chime) can be assigned to one transmitter (bell push, motion detector, window
contact). Refer to “Compatible Products”.
• Up to 20 transmitters (bell pushes, motion sensors, window contacts) can be assigned to one receiver
(chime). Refer to “Compatible Products”.
Deleting the coding:
Press the “Melody forward” button for 5 seconds, to reset the chime to the factory settings. When
the chime plays back ding-dong and the LED blinks, resetting was successful.
Note: The coding between chime and window contact exists, until you delete the coding as
described above. Even if you remove the batteries.
volume
Melodies
backwards
Melodies forward
Push mounting
plate upwards for
disassembly.
battery
compartment
battery
compartment
chime rear side
bell push rear side
chime side elevation
Suspension clip
ANL_DB500.indd 10ANL_DB500.indd 10 17.09.2020 10:35:5517.09.2020 10:35:55

Chat with your REV Ritter Orchestra DB500 manual using AI

Get instant AI answers from your REV Ritter Orchestra DB500 manual

Ask anything about the REV Ritter Orchestra DB500. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Orchestra DB500?

Yes No
0
User Pic

Jeremy Johnson

6 months ago

How easy is it to tune this gong to a specific transmitter frequency, and does it maintain volume consistency?

0
User Pic

Manual.ly

6 months ago

The tuning process is designed for simplicity, allowing you to easily set the device to your desired transmitter frequency without complex adjustments. Regarding volume, users have reported that the gong delivers strong and consistent sound levels suitable for various environments. The high-quality construction also ensures durability while maintaining performance over time.

M: QW-35-FL
M: QW-35-FL
0
User Pic

delectus_adipisci

4 months ago

Is the build quality really as solid as described, or does it feel cheap despite the low price?

M: QW-35-FL

Frequently Asked Questions

A

In an open field, the maximum range is 150 meters. However, obstacles like reinforced concrete walls or metal furniture can reduce this distance significantly.

Is this answer helpful?

A

Yes, you can change the melody at any time using the buttons on the chime. The last selected melody is saved automatically, but you can also assign different tones to different transmitters during coding.

Is this answer helpful?

A

No, the package includes one 12V 23A battery for the outdoor button. The three AA batteries required for the indoor chime must be purchased separately.

Is this answer helpful?

A

The outdoor button has an IP55 rating, making it suitable for protected outdoor areas. It is resistant to dust and water jets but should not be submerged or exposed to harsh weather directly.

Is this answer helpful?

A

Yes, you can assign up to 20 different transmitters, such as motion detectors or window contacts, to a single chime receiver. Each can be programmed with a unique melody.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Wireless installation eliminates the need for drilling holes or running complex wiring inside walls.
  • Includes 58 selectable melodies allowing for personalized ringtones for different family members.
  • Weather-resistant outdoor button (IP55) ensures durability in various outdoor conditions.
  • Adjustable volume up to 100dB with mute function provides clear audio in noisy environments.
VS

Disadvantages

  • Signal range can be significantly reduced by thick concrete walls or heavy metal shielding.
  • Indoor chime requires three AA batteries which are not included in the package.
  • System cannot be integrated into existing hardwired bell circuits.
  • Product has no replaceable parts, meaning the entire unit must be replaced if it malfunctions internally.
M: QW-35-FL

Product Specification

Type

Wireless doorbell

Standard

Wireless bus (434MHz)

Function

Alarm function

Features

IP20, IP55, battery-operated (3x AA), 58 different melodies

M: QW-35-FL

Product Description

REV Ritter Funk-Gong Orchestra White: A Wireless Chime Revolution

Transform your home entryway with the REV Ritter Funk-Gong Orchestra in pristine white. This wireless doorbell system combines elegant design with robust functionality, offering a seamless way to announce visitors without the hassle of complex wiring. The set includes a weather-resistant outdoor push button and a stylish indoor chime unit, both designed to blend perfectly with modern or traditional decor.

The heart of this system is its impressive wireless range, capable of reaching up to 150 meters in open fields. While walls and metal structures can affect signal strength, the 433 MHz frequency ensures reliable communication between the sender and receiver. The chime unit features an adjustable volume level, allowing you to customize the sound from a gentle ding-dong to a loud 100dB alert that cannot be missed. With 58 selectable melodies, every household member can choose a unique ringtone for different visitors or family members.

Installation is straightforward and tool-friendly. The outdoor button carries an IP55 rating, making it suitable for protected outdoor areas against rain and dust, while the indoor gong is rated IP20 for dry interior use. The system comes pre-coded, so you can start using it immediately after inserting the batteries. If you need to add more sensors like motion detectors or window contacts, the coding process allows you to link up to 20 transmitters to a single chime or vice versa, creating a versatile smart home security setup.

Key Features at a Glance

This product stands out due to its flexibility and ease of use. You do not need to run wires through your walls, saving time and preserving your home's structure. The ability to assign specific melodies to specific buttons means you will always know who is at the door before you answer. The system is also environmentally conscious, adhering to EU directives for electronic waste disposal.

Important Notes for Users

  • Always remove batteries if the device will not be used for an extended period to prevent leakage.
  • Do not mount the transmitter on metal surfaces as this blocks the signal.
  • The product is not intended for integration into existing wired bell systems.
  • Batteries are not rechargeable; primary batteries must be disposed of according to local regulations.
M: QW-35-FL

© Copyright 2026 Manual.ly