Manual.ly Logo

REV Ritter EMT717ACTL Manual

4.0 · 1 Ratings

PDF manual · 11 Pages

English

M: QW-35-FL
page

/ 11

Loading...
6187e531bc7c3415852c87a56c9d1e8fb86e page 9
9
GB
Energy measuring tool
Operating instructions
INTRODUCTION
Dear Customer,
We’d like to thank you for purchasing our product. Please read the following operating instructions
thoroughly before using this product for the first time and keep it handy for future reference (S1).
Please check the product before use for any damage.
PROPER USE
GENERAL SAFETY INSTRUCTIONS
• The product conforms to the appropriate European CE directives (S2).
• This product has no replaceable parts. Do not attempt to open or repair this product!
• The product is not suitable for rough use (e.g. construction sites)!
• Do not install in the immediate vicinity of paddling pools, fountains, ponds or similar bodies of water.
• Handle this product carefully. It can be damaged by shocks, blows or by being dropped, even from a low
height!
• Please observe the technical specifications!
• Please follow this instruction manual and keep it in a safe place!
• Please pass on this instruction manual to a subsequent owner!
• Not to be used by children!
• Do not operate a defective product!
• This product conforms to the appropriate European safety standards.
• The product is not intended for use by persons (including children) whose physical, sensory or mental
abilities are limited or who lack experience and knowledge! These persons may only use the product if
they are supervised by a person responsible for their safety, or if they have been inducted into how to use
the product! The supervision and use of this product must be carried out by a responsible person!
• Do not immerse in water or other liquids!
• Disconnect the product’s mains power plug in the event of a fault during operation.
• The product is IP20 rated and suitable for use in dry interior spaces (S3).
• Make sure that this product is kept out of the reach of children or unauthorised persons.
• The product is intended exclusively for household use or similar purposes. It must not be used for
commercial purposes!
• Must not be used in areas that represent an explosion hazard (e.g. carpentry workshop, paintshop, or
similar)!
• Do not use additional components!
• The product may only be used only for the purpose for which it is intended, in accordance with this user
manual!
• Do not use in the immediate vicinity of flammable materials!
GENERAL INFORMATION
• Do not operate with wet hands!
• For the connection, only use regular mains sockets (230V~, 50Hz) with protective conductors of the
public supply network which are easily accessible!
• Make sure there’s enough free space around the product for good ventilation! All objects in the vicinity of
the product should be at least 10cm away!
• This product is suitable for normal household applications; it may not be used as a safety device!
• Do not operate the product when covered (S4). This could lead to a dangerous buildup of heat!
• The product must remain freely accessible (also when in use)!

Chat with your REV Ritter EMT717ACTL manual using AI

Get instant AI answers from your REV Ritter EMT717ACTL manual

Ask anything about the REV Ritter EMT717ACTL. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EMT717ACTL?

Yes No
0
User Pic

Cristina Keeling

4 months ago

Is this device easy to use for measuring current energy consumption without complex setup?

0
User Pic

Manual.ly

4 months ago

Yes, the Energie Messgerät is designed for simple operation. It allows you to measure current energy consumption immediately without requiring extensive configuration or settings, unlike other devices on the market.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Anna Schmidt

5 months ago

Does this meter work for tracking ongoing usage only, or does it store historical data?

M: QW-35-FL

Frequently Asked Questions

A

The REV Ritter EMT717ACTL supports devices with a total power consumption of up to 3680 Watts. Exceeding this limit may damage the unit or cause inaccurate readings.

Is this answer helpful?

A

Yes, the measured values are saved automatically and remain stored even after the device is disconnected from the power source. You can resume measurements later and the new values will be added to the old ones.

Is this answer helpful?

A

No, this product is rated IP20 and is designed exclusively for dry interior spaces. Using it outdoors or in damp areas poses a safety risk and may void the warranty.

Is this answer helpful?

A

To start a new measurement, press the reset button. This clears the current session's stored values but does not affect the device's internal settings or hardware functionality.

Is this answer helpful?

A

The product is not intended for use by children. It should be kept out of their reach and operated only by adults or supervised individuals responsible for safety.

Is this answer helpful?

A

If the device is damaged, do not operate it. Since it has no replaceable parts, attempting repairs is dangerous. Contact the supplier for replacement options.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Accurately measures power consumption up to 3680W for household appliances
  • Automatically stores data even when unplugged from the mains
  • Complies with European CE safety standards and IP20 protection rating
  • Clear display shows watts, kilowatt-hours, and elapsed time simultaneously
  • Simple reset function clears stored readings for new measurements
VS

Disadvantages

  • Not suitable for commercial or industrial heavy-duty applications
  • Cannot be used in wet environments or near swimming pools
  • No replaceable parts means the entire unit must be replaced if broken
  • Limited to indoor use only due to lack of weatherproofing
  • Maximum altitude limit of 2000m restricts high-elevation usage
M: QW-35-FL

Product Specification

Type

Energy cost meter

M: QW-35-FL

Product Description

REV Ritter EMT717ACTL Energy Cost Meter - Read, Download & Print Free

The REV Ritter EMT717ACTL Energy Cost Meter is a practical tool designed for homeowners who want to understand their electricity usage better. This device helps you measure the power consumption of various electrical appliances in your home, allowing you to identify energy hogs and potentially reduce your monthly bills. By plugging an appliance into this meter before connecting it to the wall outlet, you can instantly see how much wattage the device draws.

This compact unit features a clear display that shows real-time power usage in watts, total energy consumption in kilowatt-hours, and the elapsed time of the measurement. It is built with safety in mind, meeting European CE directives and featuring an IP20 rating suitable for dry indoor environments. The device automatically saves your data even if unplugged, ensuring you never lose your readings. With a maximum load capacity of 3680W, it handles most household electronics effectively.

Using the meter is straightforward. Simply insert it into a standard 230V socket, plug your appliance into the meter, and turn on the device. The screen will perform a quick self-test before displaying current values. For appliances that cycle on and off, like refrigerators, it is recommended to monitor them over several cycles to get an accurate average reading. The reset function allows you to clear previous data for new tests without losing the ability to track cumulative usage over time.

Important Notes

  • Always ensure the product is kept out of reach of children.
  • Do not use the device in areas with explosion risks or near water.
  • Maintain at least 10cm of clearance around the unit for proper ventilation.
  • Never attempt to open the housing as there are no user-serviceable parts inside.
  • Dispose of the unit according to local electronic waste regulations.
M: QW-35-FL

© Copyright 2026 Manual.ly