Manual.ly Logo

REV Ritter EMT707CTLA Manual

0.0 · 0 Ratings

PDF manual · 5 Pages

English

M: QW-35-FL
page

/ 5

Loading...
1aeb447bd42649733542cca1240e6f8e266c page 2
ASSEMBLY
The power calculator is plugged directly into the socket. Pay attention to safety instructions!
HANDLING
1. Connect the device to the mains.
2. The display shows all features and changes into the cost mode after 3 seconds.
The last value before the power cut-off is shown.
3. Press the button „SET“ to adjust the tariff or the kWh. Firstly the tariff is shown and then the kWh,
if the button is pushed again.
Firstly the right digit blinks, which can be changed by pushing the button „“.
The value can be changed by pushing the Button „+“. Finish the setting by pushing the „MENU“-button.
4. Plug in the desired consumer.
Note:
• The reset button is used to restart the unit, whereby the information on costs, tariff and kWh is not deleted. To do
this, keep the button pressed.
• The cost and kWh information can be reset by manually entering the value 0. To do this, press the „Set“ key twice
and use the „“ and „+“ keys to enter the value 0.
• The value for kWh can either start at 0 or be set to any value (e.g. the current value of your electricity meter).
• The „“ and „+“ keys only function in setting mode („SET“).
• The display goes out when the unit is removed from the socket. However, the recorded data are retained.
• The unit is not suitable for billing electricity costs.
TROUBLE SHOOTING
Problem Task
Display - no display Reset (RST) to perform
GB
PRODUCT OVERVIEW
Button Function
MENU Display of the different features in the following sequence: cost,
tariff, kWh, W,VA, V, A, Hz and power factor.
SET Set tariff and kWh.
In setting-mode: Change of digits
+
In setting-mode: Increase the setting value
RST Reset. Costs, tariff and electrical work (kWh) are not deleted,
see also section „Handling“.
FUNCTION
The energy measuring device measures the voltage, the power consumption and the power-on time and
calculates the electric work in kWh out of it. If the energy cost are entered, also the cost are calculated and
displayed. The energy cost are calculated as follows:
Voltage (V) x current (A) x x time (h)
A LCD-Display
B MENU
C SET
D
E +
F RST
DE Eine mehrsprachige Version dieser Anleitung
finden Sie unter www.rev.de. Alternativ können
Sie auch dem nebenstehenden QR-Code folgen.
GB You can find a multilingual version of this manual
at www.rev.de. Alternatively, you can also follow
the QR-code below.
FR Une version multilingue de ce manuel vous trouverez
sous www.rev.de. Alternativement, vous pouvez suivre le code QR adjacent.
ES Puede encontrar una versión multilingüe de estas instrucciones en www.rev.de.
Alternativamente, también puede seguir el código QR contiguo.
FI Tämän käyttöohjeen monikielinen versio löytyy osoitteesta www.rev.de.
Vaihtoehtoisesti voit myös käyttää vieressä olevaa QR-koodia.
HU A jelen útmutató többnyelvű változatát a www.rev.de weboldalon találja.
Másik lehetőségként olvassa be az itt látható QR-kódot.
LV Šīs instrukcijas daudzvalodu versiju var atrast vietnē: www.rev.de.
Varat arī sekot zemāk redzamajam QR kodam.
NL Een meertalige versie van deze handleiding is beschikbaar op www.rev.de.
Als alternatief kunt u ook de hiernaast afgebeelde QR-code volgen.
SI Na voljo je večjezična različica tega priročnika www.rev.de.
Lahko pa vidite tudi sosednjo Sledite QR kodi.
INTRODUCTION
Dear Customer,
We’d like to thank you for purchasing our product. Please read the following operating instructions thoroughly
before using this product for the first time and keep it handy for future reference (S1).
Please check the product before use for any damage.
PROPER USE
• The product conforms to the appropriate European CE directives (S2).
• This product conforms to the appropriate European safety standards.
• The product is IP20 rated and suitable for use in dry interior spaces (S3).
• The product is intended exclusively for household use or similar purposes. It must not be used for commercial
purposes!
• The product may only be used only for the purpose for which it is intended, in accordance with this user manual!
• The product is not suitable for rough use (e.g. construction sites)!
• The product is not intended for use by persons (including children) whose physical, sensory or mental abilities
are limited or who lack experience and knowledge! These persons may only use the product if they are
supervised by a person responsible for their safety, or if they have been inducted into how to use the product!
The supervision and use of this product must be carried out by a responsible person!
• Make sure that this product is kept out of the reach of children or unauthorised persons.
GENERAL INFORMATION
• Handle this product carefully. It can be damaged by shocks, blows or by being dropped, even from a low height!
• Disconnect the product’s mains power plug in the event of a fault during operation.
• This product has no replaceable parts. Do not attempt to open or repair this product!
• Please observe the technical specifications!
• Please follow this instruction manual and keep it in a safe place!
• Please pass on this instruction manual to a subsequent owner!
• Not to be used by children!
• Do not operate a defective product!
GENERAL SAFETY INSTRUCTIONS
• Check the device regularly for damage, for example to the housing and the plug pins, secure closure, tight fit of
the cover. If any faults or doubts about safe operation are found, do not continue to use the device.
• Must not be used in areas that represent an explosion hazard (e.g. carpentry workshop, paintshop, or similar)!
• Do not use in the immediate vicinity of flammable materials!
• Do not install in the immediate vicinity of paddling pools, fountains, ponds or similar bodies of water.
• Do not immerse in water or other liquids!
• Do not operate with wet hands!
• Do not operate the product when covered (S4). This could lead to a dangerous buildup of heat!
• The product must remain freely accessible (also when in use)!
• For the connection, only use regular mains sockets (230V~, 50Hz) with protective conductors of the public
supply network which are easily accessible!
• Do not open the housing (S5)!
• Never operate with an open housing, or missing or damaged terminal compartment cover.
• A conversion or modification of the product affects product safety. Caution: risk of injury! A conversion or
modification of the product must not be carried out!
• De-energised only when the plug is pulled out (S6)!
• Do not operate the product’s buttons with electrically conductive objects!
• Do not plug one behind the other (S7)!
• Do not plug in a plug-in device (S9)!
• Do not operate the product at, on or in the vicinity of open flames (e.g. candles)!
• Do not expose the product to direct sun and shield it from extreme heat!
• Only connect devices up to max. 3680W total power!
• The product’s keys must not be in permanent operation!
• The device is equipped with increased protection against accidental contact. The two pins of a plug can only be
inserted into the sockets at the same time.
• Unplug the device from the socket if it is not going to be used for a long time.
• Plug this product directly into the wall socket!
• Do not operate in conjunction with adapters or intermediate plugs (S8).
ENERGY MEASURING TOOL
Tariff
electrical work (kWh)
By pressing the button „MENU“ the different functions can be displayed in the following sequence:
Cost Shows the total cost of the consumed power
Tariff Shows the preset tariff
kWh Shows the kWh
V Shows the actual voltage
A Shows the actual amperage
Hz Shows the actual Hertz value
W Shows the actual consumed power in W
VA Shows the actual consumed power in VA
PF Shows the actual power factor (W/VA)
ASSEMBLY PLACE
This product is for the use in dry rooms.
It must not be exposed to wetness, rain or spray-water. Not for outdoor use.
SCOPE OF DELIVERY
Check the delivery for completeness and perfect condition.
In the case of missing parts or damage:
• do not mount the unit!
• do not put the unit into operation!
• make a complaint to the supplier.
The deliver consists of:
• Product
• Instructions
TECHNICAL DATA
• Nominal values: 230V~; 50Hz; 16A
• IP protection class: IP20
• Protection class: I (S10)
• Ambient temperature: 0°C – 35°C / max. 35°C
• Power: max. 3680W
• Socket outlet with increased contact protection
• Overvoltage category: CAT II
• Accuracy:
Unit Accuracy Notes
V – Volt ± 5,0% Based on the following values:
I
b
: Operating current (4A)
U
n
: Rated voltage (230V~)
F
n
: Rated frequency (50Hz)
T
n
: Nominal temperature (23°C)
A – Ampere ± 5,0%
Hz – Hertz ± 0,2%
W – Watt ± 5,0%
VA – Apparent power ± 5,0%
kWh – Kilowatt hours ±1,0%
• Operating range voltage: 0,9 U
n
– 1,1 U
n
(U
n
= 230V~)
• Restricted operating range voltage: 0,7 U
n
– 1,2 U
n
(U
n
= 230V~)
• Display:
Costs 0,00 - 9999,99
Tariff 0,00 - 99,99
Electrical work 0,00kWh - 9999,99kWh
Electricity consumption 0W - 3680W
Apparent power 0VA - 3680VA
Voltage 200,00V~ - 250,00V~
Current 0,00A - 16,00A
Frequency 0,00Hz - 50,00Hz
Power factor 0,00 - 1,00
CLEANING
• Unplug the product from the mains before cleaning it.
• Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not use cleaners that
contain abrasives or solvents.
WEEE DISPOSAL INFORMATION
According to the European regulations, used electrical and electronic equipment may no longer be put out into
unsorted rubbish. The symbol on the wheeled rubbish bin points out the necessity for separated collection. Help
us to protect the environment and ensure that this unit is put out in the appropriate systems for separate collection
once you do not use it any longer. DIRECTIVE OF THE EUOROPEAN PARLIAMENT AND COUNCIL of 4th July 2012
concerning used electrical and electronic equipment. (S11)

Chat with your REV Ritter EMT707CTLA manual using AI

Get instant AI answers from your REV Ritter EMT707CTLA manual

Ask anything about the REV Ritter EMT707CTLA. Answers come from this manual, with the pages they are based on.

EMT707CTLA Maintenance Schedule

Regularly
Check device for damage

Inspect housing, plug pins, secure closure, and cover fit. If faults or doubts about safe operation are found, do not use the device.

As needed
Clean the device

Unplug before cleaning. Use a dry or slightly moist lint-free cloth with mild detergent if required. Do not use abrasive or solvent cleaners.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend EMT707CTLA?

Yes No

Frequently Asked Questions

A

Press the set button to select tariff mode. Then use the plus and arrow keys to adjust the numeric value to match your local utility rates. Press menu to save.

Is this answer helpful?

A

No, the reset button restarts the unit but saves history unless you manually zero it. Manual zeroing requires pressing set twice and entering value zero.

Is this answer helpful?

A

Connect devices up to a maximum of three thousand six hundred eighty watts total. Exceeding this may damage the unit or cause safety hazards.

Is this answer helpful?

A

No, only use in dry rooms indoors. Exposure to rain, moisture, or spray water will damage the electronics and void warranty coverage.

Is this answer helpful?

A

Voltage and current readings are accurate within five percent under specified conditions. Kilowatt hour measurement accuracy is typically within one percent.

Is this answer helpful?

A

Unplug first. Use a slightly moist lint free cloth for wiping. Never immerse the device in water or use abrasive cleaners on the casing.

Is this answer helpful?

A

Display turns off when removed from socket but data stays saved internally. It will reactivate immediately upon plugging back into a live outlet.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Accurate measurement of voltage and current consumption
  • Straightforward setup via plug-in installation
  • Internal memory retains data after unplugging
  • Real-time calculation of energy costs displayed
  • Durable housing designed for dry indoor spaces
VS

Disadvantages

  • Restriction to residential use only, no commercial allowed
  • Manual input required to set tariff rates accurately
  • Maximum load limit caps usage at 3680 watts total
  • No wireless connectivity features included in design
  • Cannot be used for official utility billing disputes
M: QW-35-FL

Product Specification

Type

Energy Cost Meter

M: QW-35-FL

Product Description

Comprehensive Guide to the REV Ritter EMT707CTLA

Managing household electricity expenses requires constant visibility and control. The REV Ritter EMT707CTLA Energy Meter White provides essential insights into your daily power usage habits. This compact device plugs directly into any standard wall socket and works instantly without complex wiring or additional hardware installations. Homeowners gain immediate access to consumption data.

Key Features Overview

Users appreciate the intuitive LCD display interface. Pressing the menu button cycles through critical data points easily. Information includes current cost, tariff setting, kilowatt hours, volts, amps, frequency, watts, volt amperes, and power factor. Setting the energy tariff is straightforward using the dedicated set buttons. You can manually adjust values to match your local utility rates accurately. The device calculates total energy costs automatically based on your specific inputs. This automation simplifies tracking monthly spending patterns effectively.

Usage and Installation Guide

Insert the plug firmly into a dry indoor outlet. Ensure no moisture is present during normal operation. After connection, the unit starts monitoring electrical flow immediately. It remembers the last settings even after unplugging due to robust internal memory storage. The screen goes dark when removed from power but stored data remains safe for retrieval later. Be aware of the maximum load limit which stands at three thousand six hundred eighty watts. This ensures safety for standard residential appliances connected simultaneously.

Important Usage Notes

This tool is designed for homes not commercial industrial sites. Do not open the housing as there are no replaceable parts inside. Regular inspection for physical damage is highly recommended for longevity. Keep away from water sources and flammable materials strictly. Follow European waste disposal directives for electronic equipment when discarding old units eventually. Service contacts are available online for further support requests.

Final Tips: Always unplug before cleaning surfaces. Use a soft dry cloth. Do not use strong chemicals. Store the paper manual for future reference safely. Monitor trends regularly to reduce surprise bills significantly throughout the year.

The design includes increased contact protection on the metal prongs. You cannot insert one prong without the other fully engaging. This prevents partial insertion accidents that cause arcing or fire risks. Display range covers broad operational needs for most consumers. Voltage operates between specific tolerances to ensure reliability. Power consumption readings appear in real time on the screen backlight.

M: QW-35-FL

© Copyright 2026 Manual.ly