Manual.ly Logo

Rega Planar 1 Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
ef3f1aa975c9b307a834b161a2ff07f925a6 page 1
1. PLATTER
2. CARTRIDGE
3. TONEARM
4. BALANCE WEIGHT
5. PLINTH
6. POWER INPUT
7. PHONO OUTPUT
8. ON/OFF SWITCH*
*UNDERNEATH PLINTH


WARNING: ONLY USE THE SUPPLIED REGA PS2 MAINS ADAPTOR WITH THIS PRODUCT.
LOCATED BENEATH
THE PLATTER
A
B
4
4
1
6
8
7
2
3
5
ENGLISH

Push the balance weight (4) onto the rear of the tonearm until it reaches the stop point (A). • Connect the power supply to the rear of the turntable
(6). • Connect the phono output (7) to an appropriate phono stage. • Carefully remove the stylus guard from the cartridge. • Turn on the Planar
1 via the on/off switch located on the underside of the plinth (8)
pulley (B). • Bias is automatically set on the RB110, no setting is required.
FRANÇAIS
• Déballez soigneusement la platine en la maintenant toujours à plat. • Enlevez le carton protecteur du sous plateau puis montez le plateau et
le tapis. • Installez le contrepoids (4) à l’arrière du bras et poussez-le jusqu’au butoir (A). • Branchez l’alimentation sur la prise à l’arrière de
la platine (6). • Branchez le bras de lecture (7) sur une entrée phono appropriée. • Enlevez soigneusement le protège-pointe de la cellule. •
Allumez la Planar 1 à l’aide de l’interrupteur marche/arrêt situé sous le socle (8)
(B). • L’anti-skating est automatique sur le bras RB110. Aucun réglage n’est nécessaire.
DEUTSCH
• Bitte entnehmen sie den Planar 1 vorsichtig der Verpackung. Halten sie ihn dabei gerade. • Entfernen Sie die Transportsicherung (Pappe)
unterhalb des Innentellers und legen den Plattenteller und die Matte auf. • Schieben Sie das Gegengewicht (4) vorsichtig auf den Tonarm, bis es
den Anschlag-Punkt (A) erreicht. • Verbinden sie die beiliegende Stromversorgung mit der Buchse an der Rückseite des Gerätes (6). • Schließen
Sie den Plattenspieler (7) an den Phonoeingang eines Verstärkers an. • Entfernen Sie vorsichtig den Nadelschutz vom Tonabnehmer-System. •
Schalten Sie den Planar 1 über den Ein/Aus-Schalter an der Unterseite des Plattenspielers ein (8)
(B). • Die Antiskating-Einstellung erfolgt beim neuen Rega RB110-Tonarm
automatisch, eine Justage ist nicht erforderlich.
ESPAÑOL
• Abrir con cuidado el plato giratorio. Siempre plano. • Retire la tarjeta del embalaje de debajo de la sub plato y montar el plato. • Empuje el
contrapeso (4) en la parte trasera del brazo hasta que llega al punto (A). • Conectar la fuente de alimentación en la parte trasera del giradiscos (6).
• Conecte el cable del brazo (7) a una entrada de fono apropiada. • Retirar con cuidado el protector de aguja de la cápsula. • Encienda el Planar
1 a través del interruptor on/off situado en la parte inferior de la base (8)
correa (B). • La desviación se establece automáticamente en el RB110, no se requiere ningún ajuste.












PS2 (UK)
INPUT
OUTPUT

INPUT
OUTPUT

INPUT
OUTPUT

INPUT
OUTPUT

INPUT
OUTPUT

INPUT
OUTPUT

Chat with your Rega Planar 1 manual using AI

Get instant AI answers from your Rega Planar 1 manual

Ask anything about the Rega Planar 1. Answers come from this manual, with the pages they are based on.

Planar 1 Maintenance Schedule

As needed
Clean the unit with a microfiber cloth

With the unit disconnected from mains, clean lightly with a microfiber cloth if necessary. Do not remove any covers.

When unused for extended periods
Unplug the power supply

Unplug the power supply if the unit is unused for extended periods of time.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Planar 1?

Yes No

Frequently Asked Questions

A

No, the Rega RB110 tonearm comes with automatic anti-skating settings pre-calibrated at the factory. You do not need to make any manual adjustments for standard playback.

Is this answer helpful?

A

The turntable ships with the Rega Elys 2 moving magnet cartridge, known for its clarity and detail retrieval across various genres of music.

Is this answer helpful?

A

It is strongly recommended to only use the supplied Rega PS2 mains adaptor. Using other adapters may void the warranty or damage the motor.

Is this answer helpful?

A

Locate the on/off switch on the underside of the plinth near the rear edge. Simply flip this switch to power the unit on after connecting the power cable.

Is this answer helpful?

A

Yes, it is designed specifically for ease of use with minimal setup steps, making it an ideal choice for those new to vinyl or upgrading their audio system.

Is this answer helpful?

A

No, the warranty covers manufacturing defects only. Damage caused by misuse, accidents, or unauthorized modifications is not covered under the guarantee policy.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • RB110 tonearm features automatic anti-skating for effortless setup
  • Heavy MDF plinth provides excellent stability and low resonance
  • Includes high-quality Rega Elys 2 cartridge out of the box
  • Simple one-switch operation located on the underside of the plinth
  • Direct drive motor offers consistent speed and reduced wow
VS

Disadvantages

  • Fixed tonearm does not allow for user adjustment of anti-skating
  • Power supply cable is fixed length and cannot be replaced easily
  • No built-in phono preamp requires external stage connection
  • Platter removal requires careful handling to avoid damage
  • Limited color options compared to some modern competitors
M: QW-35-FL

Product Specification

Drive Type

Belt

Tonearm

Straight

Audio Connections

Phono Out (RCA)

Features

Dust Cover

Dimensions

17.6x4.6x14.2 in (WxHxD)

M: QW-35-FL

Product Description

Discover the Rega Planar 1 Turntable

The Rega Planar 1 stands as a testament to British engineering and design excellence, offering audiophiles an accessible entry point into high-fidelity vinyl playback. This turntable is meticulously crafted to deliver pure musical performance without unnecessary complexity. Its robust construction features a heavy MDF plinth that ensures stability and minimizes unwanted resonance, allowing records to spin with precision. The heart of the system lies in its custom-engineered RB110 tonearm, which works in harmony with the iconic Rega Elys 2 cartridge to produce rich, detailed soundscapes.

Setting up your Rega Planar 1 is an intuitive process designed for immediate enjoyment. Upon unboxing, you simply place the platter on the sub-platter and secure the rubber mat. The balance weight slides effortlessly onto the rear of the tonearm until it hits the stop point, ensuring perfect tracking force. With automatic anti-skating already set within the RB110 arm, there are no complex adjustments required before play. You connect the included Rega PS2 power supply to the rear input and link the phono output to your amplifier or preamp. Once the stylus guard is removed from the Elys 2 cartridge, flipping the switch on the underside of the plinth brings your music to life instantly.

Beyond its ease of use, the Planar 1 excels in acoustic performance. The direct drive mechanism coupled with a high-torque motor ensures consistent speed and reduces wow and flutter, preserving the rhythmic integrity of your favorite albums. The rigid belt drive system further isolates motor noise, resulting in a silent background against which every note shines. Whether you are exploring classic rock, jazz, or classical compositions, this turntable reveals nuances often lost on lesser equipment. It is built to last, adhering to strict manufacturing standards that have defined the Rega brand since 1973.

For those concerned with longevity and safety, the unit includes comprehensive guidelines. It should be kept away from moisture and heat sources, with adequate ventilation maintained around the device. The supplied power adapter is essential for safe operation, and unplugging during extended periods of non-use is recommended. The warranty covers manufacturing defects but excludes wear and tear, emphasizing the importance of proper care and original packaging when returning items for service.

Important Notes

  • Always use the supplied Rega PS2 mains adaptor.
  • Ensure the turntable is placed on a flat, stable surface.
  • Remove the stylus guard only when ready to play.
  • Do not open the plinth as internal components are not user-serviceable.
M: QW-35-FL

© Copyright 2026 Manual.ly