Manual.ly Logo

Rega Aura Reference Manual

0.0 · 0 Ratings

PDF manual · 80 Pages

English

M: OA-GPT-54-NAN
page

/ 80

Loading...
087767156f3d38661fea58ffeda3e5f7a7d3 page 3
Introduction and Design Innovation
Earth Grounding and Installation
Connections and Supplied Cables
Cartridge Selection and Powering Up
Gain and Capacitance
Load Seings, Mute and Mono
Specications
Warranty and Warnings
1
1
2
2
2
3
4
9
Introduction and Design Innovation
The function of a phono pre-amplier is to match the output from a pick up cartridge to the input of a line level amplier. It is
required to amplify the very low signals produced by the cartridge and also to equalise the sound in accordance with the RIAA
record cutting standard. Rega believes that moving coil and moving magnet cartridges require different types of phono pre-
ampliers to achieve optimum performance. The Aura is therefore dedicated to moving coil cartridges and stays clear of any
compromises. We have avoided including any superuous functions as they obstruct the signal path and degrade the sound quality.
The Aura phono pre-amp incorporates remarkable and innovative design ideas. For those interested in the technical details, these
innovations are described more fully in the next section of this manual. Alternatively, you can simply switch on, sit back and let the
Aura speak for itself.
The Rega Aura is a three stage, all symmetrical pre-amplier. The rst stage is a symmetrical, complementary class A amplier, using
parallel connected Linear Systems ultra-low noise FET (Field Effect Transistor) transistors congured as a symmetrical compound
pair input stage. The use of FET transistors ensures there is no bias current owing in the cartridge coil so as not to upset the
delicate magnetic geometry of the cartridge. The input circuit conguration also alleviates the use of any coupling components
between the cartridge output and the input stage FET transistors, which would degrade the sound. The complementary ultra-low
noise FET transistors are carefully graded and matched for optimum performance. This stage drives the passive high frequency part
of the RIAA equalisation stage.
The second stage is a symmetrical, class A, differential amplier with a common base driver stage; this is also used as the active
amplier in the low frequency part of the RIAA equalisation stage. The third stage inverts the signal to provide the balanced output
along with the output of the second stage; the third stage uses the same circuit topology as used in the second stage. The power
supply is a symmetrical, discrete tracking power supply using fast diodes and a low noise voltage reference. Each stage has its own
localised power supply and LED referenced current generators. To maximise headroom, the Aura has a power supply voltage, which
is 60% higher than normally found in such a pre-amplier. Very high quality, polypropylene capacitors have been used in the signal
path. 1% tolerance polypropylene capacitors are used in the RIAA EQ stages and audio grade capacitors are used in the rest of the
circuit. Gain, Mute and Mono switching is implemented using high quality relays.
Earth Grounding
The Aura uses a Class I earth system, where the case metalwork is connected to the line safety earth, by means of the mains lead.
The internal signal earth is linked to this earth by the use of a network to eliminate the risk of earth/ground loops. This earth method
provides a safe and efcient discharge path for any static charge generated by the cartridge.
Installation
The Aura will work well on most surfaces, such as a shelf or a table, provided there is sufcient air around it to prevent overheating.
To avoid any possible magnetic interference and increased hum levels, position the Aura as far away from the turntable as the
tonearm lead will allow. If possible, try to place the Aura to the left of the turntable. Ideally equipment should be placed next to one
another in a line. This keeps the most delicate electronics away from other transformers. Try not to stack other hi- components,
on top of, or directly beneath the Aura. If this is unavoidable, use an equipment stand. The heat produced by the amplier, although
minimal, is dispersed to the air by the case, particularly the underside. Ensure that the case has an uninterrupted air passage
around it.
The Aura weighs 13 kg, so take great care when lifting and please ensure the shelf or stand you are using can safely support this
weight. Please refer to your stand manufacturer’s manual for maximum load capacity.
1

Chat with your Rega Aura Reference manual using AI

Get instant AI answers from your Rega Aura Reference manual

Ask anything about the Rega Aura Reference. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Aura Reference?

Yes No

Frequently Asked Questions

A

It is a high-end phono stage designed specifically for moving coil cartridges. Its purpose is to amplify the tiny cartridge signal, apply accurate RIAA equalization, and preserve detail with minimal added noise or coloration.

Is this answer helpful?

A

No. The Aura Reference is intended only for MC cartridges. Rega designed it this way to avoid compromise and to optimize the circuitry for the lower output and different electrical needs of moving coil designs.

Is this answer helpful?

A

Yes. It provides balanced XLR output as well as standard RCA output. That gives flexibility for different amplifiers and can be useful in systems designed to benefit from balanced connections.

Is this answer helpful?

A

It offers five input load settings and five capacitance settings. This lets users match cartridge specifications more closely and also experiment for a preferred sonic balance.

Is this answer helpful?

A

Mute is useful when changing gain settings, switching records, or pausing between tracks. It helps avoid unwanted pops or noise during adjustments.

Is this answer helpful?

A

A careful setup is recommended. Keep it well away from the turntable and other transformers, ensure good ventilation, and match gain, load, and capacitance to your cartridge for the best result.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Dedicated MC-only design keeps the signal path focused and highly optimized.
  • Flexible gain, load, and capacitance settings help match many cartridge types.
  • Balanced XLR and RCA outputs make it easy to fit into different systems.
  • High-grade parts and Class A circuitry aim for low noise and strong transparency.
VS

Disadvantages

  • Not compatible with moving magnet cartridges.
  • Large, heavy chassis requires a sturdy shelf and careful placement.
  • Setup may take time if you want to fine-tune loading for best results.
  • Premium design and construction suggest a high-end price and system commitment.
M: OA-GPT-54-NAN

Product Specification

Type

Phono Preamplifier

Channels

2.0

Audio Connections

Phono In (RCA), Pre Out (RCA), Pre Out (XLR)

Total Harmonic Distortion (THD)

0.03%

Color

black

M: OA-GPT-54-NAN

Product Description

Rega Aura Reference: A Purist MC Phono Stage for Serious Vinyl Listening

The Rega Aura Reference is built for listeners who want a phono stage that stays out of the way and lets moving coil cartridges do the talking. If you are exploring the Rega Aura Reference Manual, the message is clear: this is a no-compromise design focused on signal integrity, low noise, and precise cartridge matching. Rather than loading the unit with extra features, Rega concentrates on the essentials that shape musical realism.

Designed for moving coil excellence

Aura Reference is dedicated exclusively to MC cartridges, which allows the circuit to be optimized for low-level cartridge signals and the RIAA equalization needed for natural playback. Its fully symmetrical, three-stage Class A architecture is engineered to preserve detail, reduce interference, and maintain impressive headroom. The use of ultra-low-noise FET input devices helps avoid unwanted current flow through the cartridge coil, supporting clean and open sound.

Flexible setup without sonic clutter

One of the strongest aspects of this phono stage is its fine-tuning flexibility. It offers multiple gain, load, and capacitance settings so users can match a wide range of cartridges with accuracy. That makes it especially appealing for enthusiasts who enjoy dialing in the best response for their system and taste. The balanced XLR and unbalanced RCA outputs also make integration with different systems straightforward.

Built for real-world systems

Rega also pays attention to practical use. The Aura Reference includes muting and mono switching, helpful during record changes or for playing classic mono pressings. A carefully arranged grounding approach helps minimize hum and reduce the risk of loops, while the included shielded power lead and interconnect underline the brand’s focus on performance from the ground up. With its substantial 13 kg chassis, it feels engineered as much for stability as for sound quality.

A refined centerpiece for vinyl rigs

Sonically, the Aura Reference aims for speed, transparency, and control rather than embellishment. Its high-quality polypropylene capacitors, discrete power supply, and relays for key switching functions all support a cleaner path for the music. It is the kind of component that rewards careful setup and a well-matched cartridge, then disappears into the background while the record takes center stage.

Notes

  • Use only with MC cartridges.
  • Start with lower gain and adjust as needed.
  • Keep it well ventilated and away from transformers.
  • Balanced output may suit quieter, more revealing systems.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly