reer Simply Hot Bottle / Baby Food Warmer Manual
PDF manual · 18 Pages
English

Advantages and Disadvantages
Advantages
- Automatic thermostat and indicator light for easy, reliable warming and automatic shutoff
- Compatible with standard and wide-neck bottles plus small and large food jars
- Simple rotary control and keep-warm function for short-term temperature maintenance
- Practical cable winder and compact design for safe storage and reduced cord hazards
- Easy surface cleaning and recommended descaling procedure to maintain performance
Disadvantages
- Requires manual water filling and monitoring; must not be operated dry
- Not dishwasher-safe and cannot be immersed, adding small cleaning constraints
- Keep-warm recommended for no more than 1 hour for microbiological safety
- Power cord is non-replaceable; device must be discarded if cable is damaged
- Heating times vary by bottle/jar material and ambient conditions, so some trial needed
Ask a Question
Frequently Asked Questions
Typical warming time is about 6–8 minutes for bottles, but it can vary with initial water temperature, ambient temperature, bottle size and material. Always shake the bottle to even temperature and test a few drops on your wrist before feeding.
Is this answer helpful?
Yes — the unit has a keep-warm position, but for hygienic reasons you should not keep food warm for more than one hour to avoid microbial growth. If keeping warm, monitor the food and discard if kept too long.
Is this answer helpful?
Unplug and let the unit cool before cleaning. Wipe with a damp cloth and mild detergent; do not immerse or use abrasive cleaners. Descale periodically depending on water hardness using a warm vinegar-water mix (approx. 100 ml water + 100 ml vinegar), let sit ~30 minutes, then wipe clean.
Is this answer helpful?
Yes — the warmer accommodates standard and wide-neck bottles as well as baby food jars. Ensure the water reservoir is filled to about 1 cm below the container rim and remove any sealing disc so steam can escape.
Is this answer helpful?
Place the device on a dry, level surface, never operate without water, keep out of reach of children under 3, disconnect after use, and do not immerse the appliance or its cord. If the device or cable is damaged, stop using it and have a qualified technician inspect or discard it.
Is this answer helpful?
No. The power cord on this unit cannot be replaced. If the cable is damaged you should dispose of the appliance at an appropriate recycling center rather than attempting to replace the cord.
Is this answer helpful?
After heating, shake bottles or stir jars to distribute heat evenly. Place 2–3 drops of the liquid on the back of your hand or wrist to ensure it’s comfortably warm before feeding.
Is this answer helpful?
Product Description
reer Simply Hot Bottle / Baby Food Warmer — Quick, safe warming for bottles and jars
The reer Simply Hot Bottle / Baby Food Warmer is a compact, user-friendly appliance designed to heat baby bottles and jars gently and reliably by warming water in an integrated base plate. Simple controls and an indicator light make operation straightforward: fill the water reservoir to about 1 cm below the container rim, set the rotary temperature selector, and the red operating lamp signals active heating. An internal thermostat automatically switches the unit off when the preset temperature range is reached, and a keep-warm position lets you hold food briefly (microbiologically recommended maximum: 1 hour).
Built for everyday home use, the Simply Hot accommodates standard and wide-neck bottles as well as small and large baby food jars. Typical warming times are approximately 6–8 minutes for bottles and 8–10 minutes for jars, though times vary with starting temperature, ambient conditions, container size and material. For even heat distribution, the manual recommends stirring jar contents or shaking bottles and testing 2–3 drops on your wrist before feeding.
Safety and care are central to the product design: the unit must be used on a dry, level surface, never operated without water, and kept away from children under three. The device must not be immersed in liquids or placed in a dishwasher; cleaning is done with a damp cloth and mild detergent. Regular checks of the rotary control and cable are advised; repairs should only be carried out by qualified technicians. A practical cable winder on the base helps avoid dangling cords.
Descaling is recommended periodically depending on water hardness — a common home remedy is a warm vinegar-water mix (about 100 ml water + 100 ml vinegar) left to act for ~30 minutes, followed by wiping clean. At end of life the unit should be recycled at an appropriate electrical waste collection point rather than disposed of with household trash.
Whether you need a dependable bottle warmer for nightly feeds or a quick way to reheat jarred baby food, the reer Simply Hot offers a no-fuss solution with safety features and easy maintenance.
Notes
- Always check food temperature before feeding. Shake or stir to distribute heat evenly.
- Do not operate without water or move while in use.
- Clean only when unplugged and cool; descale periodically.
- Keep receipt, product number and instructions for warranty and reference.
Search for 370 Manuals online
Type-in Brand or Model