Manual.ly Logo

RCF ART 710-A MK5 Manual

0.0 · 0 Ratings

PDF manual · 52 Pages

English

M: OA-GPT-5-NAN
page

/ 52

Loading...
9128d3ac065898c6f064a06beb829d01a022 page 4
4
EN
1. SAFETY PRECAUTIONS AND GENERAL INFORMATION
The symbols used in this document give notice of important operating instructions
and warnings which must be strictly followed.
CAUTION
Important operating instructions:
explains hazards that could damage a
product, including data loss
WARNING
Important advice concerning the use of
dangerous voltages and the potential
risk of electric shock, personal injury or
death.
IMPORTANT NOTES
Helpful and relevant information
about the topic
SUPPORTS, TROLLEYS
AND CARTS
Information about the use of supports,
trolleys and carts. Reminds to move with
extreme caution and never tilt.
WASTE DISPOSAL
This symbol indicates that this product
should not be disposed with your
household waste, according to the
WEEE directive (2012/19/EU) and your
national law.
IMPORTANT NOTES
This manual contains important information about the correct and safe use of the
device. Before connecting and using this product, please read this instruction manual
carefully and keep it on hand for future reference. The manual is to be considered
an integral part of this product and must accompany it when it changes ownership
as a reference for correct installation and use as well as for the safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or
use of this product.
SAFETY PRECAUTIONS
1. All the precautions, in particular the safety ones, must be read with special
attention, as they provide important information.
2. Power supply from mains
a. The mains voltage is sufficiently high to involve a risk of electrocution; install
and connect this product before plugging it in.
b. Before powering up, make sure that all the connections have been made
correctly and the voltage of your mains corresponds to the voltage shown on
the rating plate on the unit, if not, please contact your RCF dealer.
c. The metallic parts of the unit are earthed through the power cable. An apparatus
with CLASS I construction shall be connected to a mains socket outlet with a
protective earthing connection.
d. Protect the power cable from damage; make sure it is positioned in a way that
it cannot be stepped on or crushed by objects.
e. To prevent the risk of electric shock, never open this product: there are no parts
inside that the user needs to access.
f. Be careful: in the case of a product supplied by manufacturer only with
POWERCON connectors and without a power cord, jointly to POWERCON
connectors type NAC3FCA (power-in) and NAC3FCB (power-out), the following
power cords compliant to national standard shall be used:
- EU: cord type H05VV-F 3G 3x2.5 mm2 - Standard IEC 60227-1
- JP: cord type VCTF 3x2 mm2; 15Amp/120V~ - Standard JIS C3306
- US: cord type SJT/SJTO 3x14 AWG; 15Amp/125V~ - Standard ANSI/UL 62
3. Make sure that no objects or liquids can get into this product, as this may cause
a short circuit. This apparatus shall not be exposed to dripping or splashing. No
objects filled with liquid, such as vases, shall be placed on this apparatus. No naked
sources (such as lighted candles) should be placed on this apparatus.
4. Never attempt to carry out any operations, modifications or repairs that are not
expressly described in this manual.
Contact your authorized service centre or qualified personnel should any of the
following occur:
- The product does not function (or functions in an anomalous way).
- The power cable has been damaged.
- Objects or liquids have got in the unit.
- The product has been subject to a heavy impact.
5. If this product is not used for a long period, disconnect the power cable.
6. If this product begins emitting any strange odours or smoke, switch it off
immediately and disconnect the power cable.
7. Do not connect this product to any equipment or accessories not foreseen.
For suspended installation, only use the dedicated anchoring points and do not try
to hang this product by using elements that are unsuitable or not specific for this
purpose. Also check the suitability of the support surface to which the product is
anchored (wall, ceiling, structure, etc.), and the components used for attachment
(screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee
the security of the system / installation over time, also considering, for example, the
mechanical vibrations normally generated by transducers.
To prevent the risk of falling equipment, do not stack multiple units of this product
unless this possibility is specified in the user manual.
8. RCF S.p.A. strongly recommends this product is only installed by
professional qualified installers (or specialised firms) who can ensure
correct installation and certify it according to the regulations in force.
The entire audio system must comply with the current standards and
regulations regarding electrical systems.
9. Supports, trolleys and carts.
The equipment should be only used on supports, trolleys and carts,
where necessary, that are recommended by the manufacturer. The
equipment / support / trolley / cart assembly must be moved with
extreme caution. Sudden stops, excessive pushing force and uneven
floors may cause the assembly to overturn. Never tilt the assembly.
10. There are numerous mechanical and electrical factors to be considered when
installing a professional audio system (in addition to those which are strictly
acoustic, such as sound pressure, angles of coverage, frequency response, etc.).
11. Hearing loss.
Exposure to high sound levels can cause permanent hearing loss. The acoustic
pressure level that leads to hearing loss is different from person to person and
depends on the duration of exposure. To prevent potentially dangerous exposure
to high levels of acoustic pressure, anyone who is exposed to these levels should
use adequate protection devices. When a transducer capable of producing high
sound levels is being used, it is therefore necessary to wear ear plugs or protective
earphones. See the manual technical specifications to know the maximum sound
pressure level.
OPERATING PRECAUTIONS
- Place this product far from any heat sources and always ensure an adequate air
circulation around it.
- Do not overload this product for a long time.
- Never force the control elements (keys, knobs, etc.).
- Do not use solvents, alcohol, benzene or other volatile substances for cleaning
the external parts of this product.
IMPORTANT NOTES
To prevent the occurrence of noise on line signal cables, use screened cables only
and avoid putting them close to:
- Equipment that produces high-intensity electromagnetic fields
- Power cables
- Loudspeaker lines

Chat with your RCF ART 710-A MK5 manual using AI

Get instant AI answers from your RCF ART 710-A MK5 manual

Ask anything about the RCF ART 710-A MK5. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ART 710-A MK5?

Yes No

Frequently Asked Questions

A

The ART 710-A MK5 features a 10" woofer with a 2.5" voice coil and a 1.75" compression driver driven by a 1400 W amplifier section, designed to deliver strong full-range performance from a compact cabinet.

Is this answer helpful?

A

XBoost is a rear-panel EQ mode that increases perceived bass depth and richness while controlling woofer excursion; it’s ideal for background music or full-range use without a subwoofer, while FLAT is recommended for high-volume or vocal-focused applications.

Is this answer helpful?

A

The speaker provides combo XLR/TRS balanced inputs (accepting jack or XLR), a male XLR loop output for daisy-chaining additional speakers, and an IEC mains inlet with fuse carrier and power switch.

Is this answer helpful?

A

The amplifier includes a soft-clipping limiter with an LED indicator to prevent clipping and driver overload; occasional limiter activity is normal, but frequent illumination means reduce input level or mixer output to avoid distortion.

Is this answer helpful?

A

No: handles are for transport only and must not be used for suspension. For flown installations use the dedicated ART7 H-BR accessory; the speaker is not rainproof and must be protected from moisture.

Is this answer helpful?

A

Verify the rear-panel mains voltage label matches your supply, ensure volume is at minimum, connect the mixer first, then power the speaker. Use screened signal cables, check grounding to avoid hum, and consult authorized service for voltage or fuse changes.

Is this answer helpful?

A

Keep the speaker dry and ventilated, warm voice coils slowly with low-level signal in cold environments for about 15 minutes before high-power use, clean exterior surfaces with a dry cloth while powered off, and avoid solvents or abrasives.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Powerful 1400 W amplifier with PFC for consistent output under mains variations.
  • XBoost switch provides perceptually deeper bass without excessive woofer excursion.
  • Balanced XLR/TRS inputs and XLR loop output support flexible routing and daisy-chaining.
  • Rugged polypropylene cabinet and aluminum amp frame for vibration control and heat dissipation.
  • Multiple mounting options: pole-mount, floor, stage monitor; compact and portable.
VS

Disadvantages

  • Handles are for transport only and cannot be used for suspension or rigging.
  • Changing mains voltage and fuse replacement must be done by authorized service, not user.
  • No onboard DSP presets beyond FLAT/XBoost; more advanced EQ requires external processing.
  • Frequent limiter activity indicates overload and requires reducing input or gain staging.
  • Not weatherproof; must be protected from rain and moisture for outdoor use.
M: OA-GPT-5-NAN

Product Specification

Principle

2-way

Tweeter

1x 1"

Woofer

1x 10"

Amplification

active

Frequency range

50Hz-20kHz

Power

1400W Peak

SPL max.

129dB

Dispersion angle

90°x70°

Dimensions

13.39x21.57x12.01in (WxHxD)

Weight

31.26lb

M: OA-GPT-54-NAN

Product Description

RCF ART 710-A MK5, Stück Manual

The RCF ART 710-A MK5 is a professional active two-way loudspeaker designed for versatile use in live sound, installations and portable PA setups. Packing a 10" woofer with a 2.5" voice coil and a 1.75" compression driver, the ART 710-A MK5 delivers punchy low-mid response and clear high frequencies from a compact, rugged polypropylene cabinet. Its internal 1400 W amplifier section includes balanced XLR and TRS inputs, XLR loop output, master volume, input sensitivity switch (MIC/LINE) and a selectable FLAT/XBoost EQ mode to tailor low-frequency presence depending on application.

Compact yet robust, the speaker cabinet is molded to minimize vibration and features rubberized handles and a steel pole-mount seat for secure placement on stands or over subwoofers. The amplifier frame is mechanically reinforced with aluminum to aid heat dissipation and improve transport durability. The internal power supply includes PFC (power factor correction) to maintain performance under mains voltage variations.

XBoost is a key user-facing feature: a rear-panel EQ option that perceptually enhances bass depth and richness while keeping woofer excursion under control. This makes the ART 710-A MK5 particularly useful for full-range playback without a subwoofer, background music or small-venue reinforcement where added low-end impact is desirable without sacrificing clarity.

Connectivity and controls are straightforward: combo XLR/TRS input accepts balanced and unbalanced sources, an XLR output enables daisy-chaining, and visual LEDs indicate power, signal presence and limiter activity. A built-in limiter provides soft clipping protection to avoid amplifier overload and driver stress; occasional limiter activity is normal under heavy program material. IEC mains inlet, fuse carrier and power switch are all provided for safe mains operation.

Installation options include floor/stand mounting, stage monitor placement and suspension using the dedicated ART7 H-BR accessory (handles are solely for transport and must not be used for rigging). The manual emphasizes professional installation, proper mains voltage checks, use of screened signal cables to avoid interference, and routine care such as warming voice coils in cold conditions and cleaning with a dry cloth when powered off.

In short, the ART 710-A MK5 is a compact, powerful and versatile active speaker offering robust build quality, flexible connectivity, intelligent protection and a selectable bass-enhancement EQ that adapts the speaker for both full-range and vocal/PA applications.

Notes

  • Always verify mains voltage label before connecting power and use the correct fuse values for your region.
  • Do not expose the speaker to rain or moisture; suspend only with certified rigging accessories.
  • Occasional limiter LED activity is acceptable; frequent or continuous activity means reduce input level.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly