Manual.ly Logo

RCF ART 708-A MK4 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-54-NAN
page

/ 12

Loading...
a6b940eb2d47e5daea4f22c258a9888c1be1 page 3
3
ENGLISH
Before connecting and using the amplifier, please read this instruction manual carefully and keep it on hand for future reference. The manual
is to be considered an integral part of the product and must accompany the amplifier when it changes ownership as a reference for correct
installation and use as well as for the safety precautions. RCF S.p.A. will not assume any responsibility for the incorrect installation and/or
use of the product.
WARNING: To prevent the risk of fire or electric shock, never expose this equipment to rain or humidity.
1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important information.
2. The power supply voltage of this equipment is sufficiently high to involve a risk of electrocution; therefore, never install or connect the
product with the power supply switched on.
Before powering up the amplifier, make sure that all the connections have been made correctly and that the voltage of your power mains
corresponds to the voltage shown on the rating plate on the unit; if it does not, please contact your RCF dealer.
The metallic parts of the unit are earthed by means of the power cable. This is a Class I device and for its use it must be connected to a
grounded power source. To protect the power cable from damage, make sure that it is positioned so that it cannot be stepped on or crushed
by objects. To prevent the risk of electric shock, never open the amplifier. There are no parts on the inside that the user needs to access.
Appliance coupler or PowerCon Connector® is used to disconnect device from MAIN power. This device shall remain readily accessible after
the installation.
3. Make sure that no objects or liquids can get into this product, as this may cause a short circuit. This apparatus shall not be exposed to
dripping or splashing. No objects filled with liquid, such as vases, shall be placed on this apparatus. No naked sources (such as lighted candles)
should be placed on this apparatus.
4. Never attempt to carry out any operations, modifications, or repairs that are not expressly described in this manual. Contact your authorized
service centre or qualified personnel should any of the following occur:
- the amplifier does not function (or functions in an anomalous way);
- the power supply cable has been damaged;
- objects or liquids have got into the unit;
- the amplifier has been subject to heavy impact.
5. When the amplifier is not to be used for long periods of time, switch it off and disconnect the power cable.
6. If the amplifier begins to emit any strange odours or smoke, switch it off immediately and disconnect the power supply cable.
7. Do not connect this product to any equipment or accessories not specified.
For suspended installation, only use the dedicated anchoring points and do not try to hang this product using HANDLES or elements that are
unsuitable or not specific for this purpose.
Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and the components used for
attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the system/installation over time,
also considering, for example, the mechanical vibrations normally generated by the transducer.
To prevent the risk of falling equipment, do not stack multiple units unless this possibility is specified in the instruction manual.
8. RCF S.p.A. strongly recommends this product is installed by professional qualified installers (or specialised firms) who can ensure correct
installation and certify it according to the regulations in force.
THE ENTIRE AUDIO SYSTEM MUST COMPLY WITH THE CURRENT STANDARDS AND REGULATIONS REGARDING ELECTRICAL SYSTEMS.
9. SUPPORTS AND TROLLEYS
The equipment should only be used on trolleys or supports, where necessary, that are recommended by the manufacturer. The equipment/
support/trolley assembly must be moved with extreme caution. Sudden stops, excessive pushing force and uneven floors may cause the
assembly to overturn.
10. There are numerous mechanical and electrical factors to be considered when installing a professional audio system (in addition to those
which are strictly acoustic, such as sound pressure, angles of coverage, frequency response, etc.).
11. HEARING LOSS
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing loss is different from person
to person and depends on the duration of exposure. To prevent potentially dangerous exposure to high levels of acoustic pressure, anyone
who is exposed to these levels should use adequate protection devices. When a transducer capable of producing high sound levels is being
used, it is therefore necessary to wear ear plugs or protective earphones. See the technical specifications in the instruction manual for the
maximum sound pressure the loudspeaker is capable of producing.
SAFETY
PRECAUTIONS

Chat with your RCF ART 708-A MK4 manual using AI

Get instant AI answers from your RCF ART 708-A MK4 manual

Ask anything about the RCF ART 708-A MK4. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ART 708-A MK4?

Yes No

Frequently Asked Questions

A

It is an active two-way loudspeaker designed for professional sound reinforcement. It combines an 8-inch woofer and compression driver with built-in amplification and protection features.

Is this answer helpful?

A

The speaker uses a 400W amplifier system, with 300W for the woofer and 100W for the high-frequency driver. This gives it strong output for its size.

Is this answer helpful?

A

Yes. The rear panel includes a MIC/Line input selector, so you can switch between microphone-level and line-level sources depending on your setup.

Is this answer helpful?

A

Flat is the standard setting for accurate sound reproduction. Boost adds a louder, fuller contour that can be useful for background music at lower volumes.

Is this answer helpful?

A

Yes. It includes a 35 mm pole mount socket for stand use. Make sure the stand is stable and rated for the speaker’s weight.

Is this answer helpful?

A

No. The handles are for carrying only, not for suspension or rigging. If you need flown installation, use approved hardware and qualified installers.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • High-output sound in a compact 8-inch format with clear articulation.
  • Built-in limiter and protection circuits help maintain safe, stable performance.
  • Flexible rear-panel controls support microphones, line sources, and speaker linking.
  • Rugged cabinet design and pole mount make it practical for mobile or fixed use.
VS

Disadvantages

  • Not intended for suspension by the handles, so rigging needs proper accessories.
  • Maximum performance depends on correct gain staging and careful setup.
  • The speaker is powerful, but it may still be too compact for large bass-heavy events without a subwoofer.
M: OA-GPT-54-NAN

Product Specification

Principle

2-way

Tweeter

1x 1"

Woofer

1x 8"

Amplification

active

Frequency range

60Hz-20kHz (-3dB)

Power

400W RMS, 800W Peak

SPL max.

127dB

Beam angle

90°x70°

Dimensions

11.46x18.90x10.87in (WxHxD)

Weight

22.49lb

M: OA-GPT-54-NAN

Product Description

RCF ART 708-A MK4: Compact Power for Serious Sound

The RCF ART 708-A MK4 is built for performers, DJs, and venues that need a dependable active speaker with impressive output in a portable format. It continues the ART 7 philosophy of combining strong acoustic performance, practical handling, and rugged construction, making it a smart choice for both live sound and installed applications.

At the heart of the design is a two-way active system with an 8-inch woofer and a 1-inch compression driver, powered by a 400W amplifier split between low and high sections. That combination delivers energetic sound with clean detail, while the cabinet design helps keep vibration under control even at higher volumes. The result is a speaker that feels ready for demanding daily use without sacrificing clarity.

One of the strongest qualities of the ART 708-A MK4 is how flexible it is in real-world setups. The rear panel includes combo XLR/jack inputs, an XLR output for daisy-chaining, a volume control, and a Flat/Boost EQ switch. There is also a MIC/Line selector, which makes it easy to adapt the speaker to microphones or line-level sources. For users who want quick setup and reliable operation, these simple controls are a major advantage.

The speaker is also designed with practical protection in mind. Built-in limiter and thermal protection help prevent overload and reduce the chance of distortion becoming a problem. For busy environments, that means more confidence when the system is pushed hard. The cabinet itself uses a durable polypropylene composite material, and the integrated pole mount plus stage-monitor-friendly shape make it suitable for stands, floor monitoring, or fixed installations.

Notes

  • Use Flat mode for most live and speech applications.
  • Boost is better suited to low-volume background music.
  • Always connect to a grounded power source.
  • Do not suspend the speaker by the handles.
  • For safe rigging or installation, use approved hardware and qualified personnel.

The RCF ART 708-A MK4 Manual emphasizes safe operation, but the product itself stands out for its balance of portability, power, and professional control. If you want a compact active speaker that can handle regular work with confidence, this model offers a compelling mix of sound quality and reliability.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly