PS Audio Stellar Phono Manual
PDF manual · 20 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your PS Audio Stellar Phono manual using AI
Get instant AI answers from your PS Audio Stellar Phono manual
Ask anything about the PS Audio Stellar Phono. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Stellar Phono?
Yes NoFrequently Asked Questions
Yes. It provides Moving Magnet (MM) and Moving Coil (MC) inputs. You can switch between MM and MC using the remote, and then select gain and the correct resistive loading for the cartridge type.
Is this answer helpful?
Use cartridge output voltage as your starting point. The guide recommends gain ranges for MM and MC cartridges and pairs them with appropriate loading. After selecting the setting, listen for correct noise levels and clarity, and re-check the gain if you hear hum or buzzing.
Is this answer helpful?
MC loading includes multiple resistive values (60 ohms, 100 ohms, 200 ohms, 47k ohms) plus a custom option. The custom setting uses rear-panel potentiometers and can select 1 to 1000 ohms, with the guide advising you to mute before changing it.
Is this answer helpful?
With single-ended RCA connections, the system provides 6 dB less gain than the balanced XLR path. For low-gain cartridges (for example, low-output MC), balanced XLR can be preferable to maintain sufficient amplification and reduce the chance of incorrect gain matching.
Is this answer helpful?
The guide points first to RF interference from other electronics such as computers or servers. Move the phono unit farther from potential RF sources, use high-quality shielded interconnects, and if needed add a ferrite clamp to the RCA cable between your turntable and phono preamp.
Is this answer helpful?
Idle mode deactivates the output relays to reduce unnecessary operation when you are not playing records. You can toggle idle mode from the front logo button or the remote. Mute status is shown by the Mute LED, and the guide also recommends muting before certain rear-panel custom loading changes.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Fully discrete phono amplification with DC coupling, designed to maintain accurate tonal balance.
- Remote control for MM/MC, gain, and resistive loading, making cartridge setup faster.
- MC tuning support includes multiple resistive options and custom loading from 1 to 1000 ohms.
- Balanced XLR and single-ended RCA outputs for flexible system matching.
- Low distortion and strong frequency response targets for detailed, controlled playback.
Disadvantages
- Passively cooled design requires consistent ventilation to run properly.
- Gain and loading changes are intended to be done via the remote, adding setup steps for swaps.
- MM resistive loading is fixed at 47k ohms, so matching may rely more on cable capacitance.
- Single-ended operation provides 6 dB less gain than balanced XLR, which can affect low-output cartridges.
- Best performance depends on proper grounding and minimizing RF interference from nearby devices.
Product Specification
Type
Phono Preamplifier
Channels
2.0
Audio Connections
2x Phono In (RCA), Pre Out (RCA), Pre Out (XLR)
Signal-to-noise ratio (SNR)
74dB (MC), 82dB (MM)
Total Harmonic Distortion (THD)
0.01%
Dimensions
16.93x3.23x12.99in (WxHxD)
Weight
21.61lb
Product Description
PS Audio Stellar Phono Preamplifier: Tuned Transparency for Modern Analog
A phono stage built to get out of the way
The PS Audio Stellar Phono Preamplifier is designed for listeners who want analog to sound like music first, measurements second. Its approach emphasizes an accurate tonal balance instead of chasing “overly perfect” lab numbers that can translate into a more grey, less dimensional presentation. The Stellar Phono is fully discrete and uses proprietary circuitry that avoids relying on heavy global feedback. With a DC-coupled signal path from input to output, it stays present, stable, and naturally expressive.
Practical control from the front panel and remote
Getting the most from your cartridge is part of the experience here, and PS Audio gives you flexible setup options. The unit supports both Moving Magnet (MM) and Moving Coil (MC) cartridges. You can toggle MM/MC, adjust gain, and select loading remotely, including resistive loading choices that are mandatory for flat frequency response. The default power-up state is moving magnet, low gain, and 47k ohm loading, with the unit in mute for safe connection.
A standout benefit is how quickly you can audition settings. The front panel LEDs keep you oriented: mute status, selected input, gain, and loading. For MM cartridges, resistive loading is fixed at 47k ohms, while capacitive matching matters and is influenced by your RCA cable capacitance. For MC cartridges, you get multiple resistive loading options, plus a custom loading range via rear controls (1 to 1000 ohms) for fine-tuning.
Setup considerations that matter for sound and silence
Installation is straightforward, but the guide stresses a few things that directly affect performance. Place the phono preamplifier away from RF sources like computers and servers, ensure adequate ventilation for passive cooling, and use high-quality shielded interconnects. If your turntable has a grounding wire, connect it to the rear ground binding post. When noises appear, the troubleshooting approach focuses first on RF interference, then on gain setting and grounding.
Performance designed for detail without harshness
Key performance claims include a frequency response of 20 Hz to 20 kHz within +/-0.25 dB and extremely low distortion (THD under 0.01% at 0.5 V output at 1 kHz). With balanced XLR outputs and single-ended RCA outputs, it fits both modern and traditional setups.
Top highlights (quick takeaways)
- Fully discrete, DC-coupled, Class A design aimed at preserving correct tonal balance.
- Remote control for MM/MC selection, gain, and resistive loading, with clear front-panel LED feedback.
- MC support includes multiple load values plus custom 1-1000 ohm adjustment for cartridge matching.
- Low-noise troubleshooting guidance: reduce RF interference, verify gain, and confirm grounding.
Notes
- Changes to loading require muting during custom adjustments.
- Use idle mode when your system is not playing, and remember that powering down via the master switch restores factory defaults.
- For step-by-step setup and safe operation, see the PS Audio Stellar Phono Preamplifier Manual.
Search for 67,706 Manuals online
Type-in Brand or Model