PS Audio DirectStream DAC Manual
PDF manual · 28 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your PS Audio DirectStream DAC manual using AI
Get instant AI answers from your PS Audio DirectStream DAC manual
Ask anything about the PS Audio DirectStream DAC. Answers come from this manual, with the pages they are based on.
DirectStream DAC Maintenance Schedule
Use high quality automotive scratch removal polish or car finish polish and wax for minor scratches. Use a dry cloth for general cleaning.
Spray Windex or similar glass cleaner on a soft lint free towel and carefully clean. Do not spray cleaner directly on the unit.
Ask a Question
Do you recommend DirectStream DAC?
Yes NoFrequently Asked Questions
Yes. DirectStream is built to accept PCM and DSD audio inputs, then process them using its DSD-based engine. PCM can be converted internally, while DSD support can be used via native I2S paths or DoP over compatible interfaces, depending on how your source outputs the data.
Is this answer helpful?
The design aims to reduce jitter dependence by using proprietary FPGA processing rather than classic edge-based clock recovery. It watches for the meaning of the digital data in context and targets the incoming timing effects so jitter does not translate into the FPGA processing as it would in more traditional designs.
Is this answer helpful?
You can use network playback with the optional Network Bridge II, S/PDIF via optical (TOSLINK), coax (RCA), or AES/EBU via balanced XLR, plus USB and I2S. The unit supports high-resolution PCM over USB and S/PDIF, and it supports DoP and DSD depending on the input method and your source.
Is this answer helpful?
Yes. DirectStream is designed to drive power amplifiers directly, with high-performance balanced (XLR) or single-ended (RCA) analog outputs. If gain is too high, you can switch to a lower output level and use the output attenuator for better system matching.
Is this answer helpful?
Direct native DSD over S/PDIF is not supported. Instead, DSD must typically be sent as DoP (DSD over PCM) when using S/PDIF-compatible inputs like RCA, XLR (AES/EBU), or optical TOSLINK. Many software players can convert DSD files to DoP automatically.
Is this answer helpful?
DirectStream uses firmware stored on an SD card. Updates are installed by powering off the unit with the rear switch, inserting the SD card with correct orientation, and powering back on. During the update process, do not remove power or the SD card until the unit finishes and initializes.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- DSD-centered design converts PCM and DSD into double-rate DSD for detailed, natural sound.
- FPGA-based processing is designed to reduce jitter sensitivity by avoiding classic clock recovery.
- Passive output stage using a high-quality transformer supports wide bandwidth and low noise goals.
- Multiple digital inputs including USB, S/PDIF (optical/coax), AES/EBU, and I2S/DoP paths.
- No-loss internal volume control design for precise level adjustment across listening ranges.
Disadvantages
- Best results depend on proper AC power and thoughtful system matching (gain, cabling quality).
- USB playback may require the correct driver on older Windows systems.
- Some formats and DSD-over-path options depend on DoP versus native DSD support.
- Direct output gain can be too high for some preamps or sensitive amps, requiring attenuator use.
- Firmware updates involve an SD card workflow and careful power management during installation.
Product Specification
Type
D/A converter
D/A converter PCM
24bit/192kHz
D/A converter DSD
DSD128
Frequency range
20Hz-20kHz (+-0.3dB)
Total harmonic distortion (THD)
0.03%
Inputs
Digital Audio In (coaxial), Digital Audio In (optical), Digital Audio In (AES/EBU)
Outputs
Stereo Line Out (RCA), Stereo Line Out (XLR)
Other connections
USB-B 2.0, 2x I2S In (HDMI)
Power supply
Mains operation
Special features
Asynchronous USB
Color
black
Dimensions
16.93x3.94x14.17in (WxHxD)
Weight
21.99lbs
Product Description
PS Audio DirectStream DAC - Unlocking More Music Details
The PS Audio PerfectWave DirectStream DAC is built to sound natural, revealing fine musical cues that can disappear behind typical digital-to-analog processing. It serves as a DAC, preamp, and media hub, taking PCM and DSD audio and converting it into a high-performance analog signal designed to feed a power amplifier directly or pair with a preamplifier.
A key theme behind the DirectStream is its distinctive DSD-centered architecture. Instead of relying on off-the-shelf DAC chips, the design uses an FPGA-based core that upsamples incoming audio to DSD at high rates, processes it with noise shaping, and outputs through a passively filtered analog stage centered on a high-quality output transformer. This approach aims to improve perceived resolution, sustain, and realism, particularly around upper harmonics, decay, reverb tails, and room reflections.
The unit is engineered to be less sensitive to jitter and input source differences. DirectStream handles PCM conversion across common digital interfaces (including AES/EBU, S/PDIF via optical or coax, USB, and I2S/DoP paths) without traditional clock recovery, using a fast sample-and-recognize method so that jitter present on the input is effectively lost in the FPGA processing.
Beyond sound quality, the product supports modern listening setups with multiple digital inputs and straightforward operation via a front-panel touch screen and remote. It offers two output levels (High and Low) plus an optional output attenuator to help match gain with your amplification chain. You can also assign custom input names, dim the screen, and manage updates using user-installable firmware on an SD card.
Key takeaways
- DSD-first conversion: PCM and DSD are converted into a double-rate DSD processing flow.
- Jitter reduction: proprietary FPGA processing is designed to eliminate jitter dependence on input edges.
- Passive output stage: transformer-based analog filtering supports wide bandwidth and low noise.
- Flexible connectivity: USB, S/PDIF, AES/EBU, and I2S/DoP options support high-resolution playback.
Notes
- Register the unit to validate warranty coverage and receive upgrade notifications.
- Use quality AC power and avoid bypassing the ground pin.
- DirectStream can accept DSD as DoP over S/PDIF/USB paths, while I2S can carry DSD more directly depending on source support.
If you are exploring the PS Audio DirectStream DAC Manual, this is the essence: a carefully voiced, DSD-based DAC designed to reduce jitter influence, preserve musical subtleties, and deliver a highly flexible setup for modern digital libraries.
Search for 67,706 Manuals online
Type-in Brand or Model