Manual.ly Logo

PS Audio BHK Signature Mono 600 Manual

0.0 · 0 Ratings

PDF manual · 32 Pages

English

M: QW-35-FL
page

/ 32

Loading...
3cef100a534d2b01aa3d88b039bfa5a717e9 page 14
PS Audio® Inc. 4865 Sterling Drive Boulder, Colorado 80301 800-PSAUDIO
®
2020
Beyond the Basics
aspects of the BHK 600 where Bascom King and our engineers chose the best-sounding technology
for the task. This tube is a high-quality NOS tube, chosen for its superior performance. It will not
need to be changed for many years/thousands of hours of use. We do not believe that swapping this
rectier tube for another tube (NOS or otherwise) will yield any improvement.
All tubes have a limited life-span. If used just a few hours a day, they can go for many years without
replacement. This is especially true of the rectier tube, which will most likely last seven to 10 or more
years. Therefore, the following discussion on tube life will apply to the two audio signal tubes.
The sonic characteristics of audio tubes will change over time. When an audio tube is new, some
hours of burn-in will lead to the tube sounding its best. Once burned in, these tubes will perform
beautifully and will be at their peak performance. With extended use, the performance of audio tubes
will decrease slightly. When the audio tubes are in need of replacement, the sound quality of the BHK
600 will be slightly diminished. A simple change of the audio tubes will restore the performance.
Routine changing of the two audio tubes in each amplier is recommended every one to two
years. Replacement matched pairs of tubes are available from PS Audio as well as from numerous
online tube retailers. When you change the audio tubes, change the two tubes in both ampliers.
A matched quad of tubes would be best to make sure the two channels perform identically. At a
minimum, the tubes in each amplier should be matched. Tube matching means that each tube is
evaluated and matched with a tube with very similar electrical characteristics.
Tube Rolling
Tube rolling simply means swapping out the audio signal tubes with a dierent brand of tube
to change the sound. Perhaps the “rolling” part of the term came about because the tubes are
round and they roll. We expect some of you will want to do some tube rolling. If so, we have some
suggestions:
• Wait until after your BHK-600 is both fully burned-in and you are comfortable with its sonic
performance and operation. New Old Stock (NOS) tubes, or dierent tube brands, may change
the sonic signature of an amplier but will not correct an electrical or acoustical problem.
• Tube rolling involves comparing the varying sound qualities of each tube. We believe that
your comparison should be to a known high-quality sound: the tubes we have selected for
use in the BHK 600.
• The E88CC/6922 audio signal tubes can be substituted with type 6DJ8, 7DJ8 or 7308 tubes.
• The 6CA4/EZ81 rectier tube, should not be substituted with another type.
• More information on tube rolling is found in the Reference section.
Replacing Tubes
Detailed instructions for replacing the tubes are provided in the Reference section. Please note the
following cautions:
• Your amplier must be fully turned o using the master Power switch. We would encourage
you to also unplug the amplier.
• Let the amplier cool down. The two tube panel access screws can get hot.
• High voltage is present for a time in the tube compartment EVEN AFTER that amplier is

Chat with your PS Audio BHK Signature Mono 600 manual using AI

Get instant AI answers from your PS Audio BHK Signature Mono 600 manual

Ask anything about the PS Audio BHK Signature Mono 600. Answers come from this manual, with the pages they are based on.

BHK Signature Mono 600 Maintenance Schedule

Remind me when maintenance is due
Every 1-2 years
Replace audio signal tubes

Routine changing of the two E88CC/6922 audio signal tubes is recommended every one to two years to maintain performance.

Show in the manual (page 20)
As needed
Clean the unit with a dry cloth

The manual states to clean only with a dry cloth. Do not use wet or chemical cleaners.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend BHK Signature Mono 600?

Yes No

Frequently Asked Questions

A

The unit weighs 108 pounds or 49 kilograms. Shipping weight is 120 pounds. This is considered very heavy for home audio equipment.

Is this answer helpful?

A

It contains two Genalex Gold Lion E88CC signal tubes and one 6CA4 rectifier tube. Signal tubes should be replaced every one to two years.

Is this answer helpful?

A

Yes, single-ended interconnects are supported. You must select the SE input setting on the back for correct operation.

Is this answer helpful?

A

The warranty covers the unit for three years on parts and labor. The vacuum tubes have a separate one year warranty.

Is this answer helpful?

A

Leave the unit in Play mode for the first 24 hours to break in. Sound quality improves over the first 100 hours of operation.

Is this answer helpful?

A

Not recommended initially. The BHK handles power well. If used, ensure it can handle high current demands without degradation.

Is this answer helpful?

A

Do not connect ground wire to speaker posts. Use the dedicated ground binding post on the back panel for subwoofers.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Delivers 600 watts to drive demanding speakers with ease
  • Features warm vacuum tube sound with modern reliability
  • Idle mode conserves power and extends tube life significantly
  • Balanced XLR inputs reduce noise compared to single-ended
  • Rigorous engineering by Bascom King legacy ensures quality
VS

Disadvantages

  • Unit is extremely heavy requiring two-person lift
  • Requires strict ventilation to prevent overheating issues
  • Signal tubes need periodic replacement for optimal sound
  • Sensitive to ground loops causing audible hum noise
  • High setup complexity requires careful cable management
M: QW-35-FL

Product Specification

Channels

1

Power per Channel

600W (8 Ohm), 1000W (4 Ohm)

Connections

Line In (RCA), Line In (XLR)

Power Consumption

1500W max, 225W standby

Dimensions

17.09 x 11.22 x 14.02 in (W x H x D)

Weight

108.03 lbs

M: QW-35-FL

Product Description

Experience the Pinnacle of Audio Engineering

Welcome to the world of high-fidelity perfection with the BHK Signature Mono 600. This amplifier embodies the spirit of Bascom King and his lifelong pursuit of sonic excellence within the audio industry. Every circuit and vacuum tube was meticulously selected to deliver the soul of your favorite songs. The unit offers massive output power capable of driving even demanding modern speakers to new heights without distortion. Audio enthusiasts deeply appreciate the warm tube character combined with modern solid-state reliability where it matters most for stability.

Essential Setup Considerations

Owning this specific equipment requires respect for its physical nature and design complexity. Weighing over one hundred pounds per channel, professional assistance or a strong friend is recommended during unboxing and final placement. Proper ventilation is absolutely critical since the chassis generates significant heat during heavy operation. Never place the unit directly on carpet or inside enclosed cabinets to ensure necessary airflow around all sides continuously. The location strategy often dictates the final sound quality significantly, so keeping cable runs short between speakers and amps improves clarity greatly. The surface must be rigid and solid like wood or stone to support the weight.

Operational Modes and Component Longevity

Management of power states plays a vital role in preserving component life and reducing power consumption safely. An Idle mode keeps electronics ready while conserving tube life effectively when not playing music actively. You activate full power for listening sessions using the front panel logo switch safely and easily. Burn-in is essential for capacitors and tubes to reach optimal performance levels over the first hundred hours of use. Regular maintenance of tubes ensures consistent fidelity over years of daily enjoyment for serious listeners. Rectifier tubes last much longer than signal tubes usually. Changing tubes resets the sound profile back to peak quality.

Connectivity and Power Requirements

This system supports balanced XLR connections to minimize noise interference from your source components effectively. Voltage options are factory set to match your region securely without user intervention during setup procedures. Quality power cords are encouraged for best electrical performance standards and safety measures. Ground loops can cause hums that require careful troubleshooting or isolation transformers to resolve correctly in complex systems. Fuses are H-rated to handle high transient current rushes safely. Use banana plugs for speaker connections to ensure locking contact.

Support and Warranty Information

Service is handled through authorized centers for warranty protection and safety. Registration validates the start date for coverage terms lasting three years on parts and labor. Vacuum tubes have a separate one year coverage period for replacements. Contact support directly for manual downloads or troubleshooting guides if questions arise later. This ensures your investment remains protected while delivering years of musical enjoyment.

M: QW-35-FL

© Copyright 2026 Manual.ly