PS Audio BHK Signature 250 Manual
PDF manual · 18 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your PS Audio BHK Signature 250 manual using AI
Get instant AI answers from your PS Audio BHK Signature 250 manual
Ask anything about the PS Audio BHK Signature 250. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend BHK Signature 250?
Yes NoFrequently Asked Questions
It aims for a blend of tube smoothness and solid-state control. The hybrid design is meant to sound spacious, refined, and powerful without losing detail or dynamics.
Is this answer helpful?
Yes. It ships with matched vacuum tubes already installed, so setup is simple. You only need to place it, connect it properly, and allow the tubes to warm up.
Is this answer helpful?
Yes. The BHK Signature 250 supports both balanced XLR and unbalanced RCA inputs. Balanced XLR is often preferred for longer cable runs and lower noise.
Is this answer helpful?
The amplifier benefits from at least 24 hours of initial on-time, and many listeners report further improvement over 100 to 200 hours of use.
Is this answer helpful?
A blinking logo after startup usually indicates fault mode. Check for overload, short circuits, overheating, low speaker impedance, or DC on the outputs, then reset the unit.
Is this answer helpful?
No. Bridging is not supported and may damage the output circuitry. It is designed to operate as a stereo amplifier in its intended configuration.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Hybrid tube and MOSFET design combines warmth, detail, and strong speaker control.
- High power output gives the amplifier authority with both easy and difficult loudspeakers.
- Balanced XLR and RCA inputs make system integration flexible.
- Gold-plated copper binding posts and auto-bias support reflect premium build quality.
Disadvantages
- Heavy chassis and large power draw make placement and installation less convenient.
- Performance depends on break-in time, cable quality, and proper ventilation.
- Voltage is factory set, so it must be matched to the correct region.
- Tubes need periodic replacement, which adds maintenance over time.
Product Specification
Channels
2
Power per Channel
250W (8Ω), 500W (4Ω)
Connections
Stereo Line In (RCA), Stereo Line In (XLR)
Power Consumption
1600W max, 175W mute
Dimensions
17.09x8.66x15.00in (WxHxD)
Weight
82.89lb
Product Description
PS Audio BHK Signature 250
The PS Audio BHK Signature 250 is a serious stereo power amplifier built for listeners who want both authority and refinement. Designed by Bascom H. King, it follows a hybrid approach that pairs a zero-loss vacuum tube input stage with a high-bias MOSFET output section. The result is an amplifier that aims to preserve the natural texture of music while still delivering the grip and speed needed for demanding speakers.
If you are browsing the PS Audio BHK Signature 250 Manual, the first impression is clear: this amplifier is engineered with care at every level. It offers balanced XLR and unbalanced RCA inputs, gold-plated copper binding posts, and automatic bias handling for compatible 6 or 7 series triodes. The unit ships with matched Gold Lion tubes installed, so setup is straightforward, yet it still gives enthusiasts room to explore tube rolling and fine-tune the sound to their taste.
Power is another highlight. With 250 watts into 8 ohms and 500 watts into 4 ohms on short peaks, the BHK Signature 250 has the muscle to control large dynamic swings without losing composure. Its wide frequency response, low distortion, and very low output impedance help it stay composed across a wide range of loudspeakers. The amplifier also includes standby operation and 12V trigger support, making it easy to integrate into a modern system.
What makes it especially appealing is the attention to real-world listening. PS Audio emphasizes proper placement, quality power cabling, ventilation, and a healthy break-in period. That may sound picky, but it reflects the philosophy behind the design: this is not a casual appliance, but a high-end component meant to reward careful system matching. The BHK Signature 250 is for audiophiles who value depth, drive, and a touch of tube richness without giving up solid-state discipline.
Notes
- Best results come from proper ventilation, quality cables, and a stable power setup.
- The amplifier sounds best after meaningful break-in time and careful system matching.
- Tube rolling can subtly change the character, but the default setup is ready to use.
Search for 67,706 Manuals online
Type-in Brand or Model