Profoto Connect Manual
PDF manual · 32 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Profoto Connect manual using AI
Get instant AI answers from your Profoto Connect manual
Ask anything about the Profoto Connect. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Connect?
Yes NoFrequently Asked Questions
It offers three basic settings: off, auto, and manual. You can toggle switches to select these modes without physical buttons beyond the release mechanism.
Is this answer helpful?
Yes, it triggers Air Remote and Air Sync transceivers with built-in AirTTL functionality for compatible Profoto flashes.
Is this answer helpful?
The typical battery lifetime is over 30 hours depending on usage, utilizing a Li-Polymer battery type.
Is this answer helpful?
No, it is intended for indoor conditions use only. Do not expose to moisture, dripping, or splashing water.
Is this answer helpful?
It uses a USB-C port to charge the battery using a USB-C to USB-A charging cable.
Is this answer helpful?
Yes, the Connect-C version is designed specifically for Canon cameras using Canon's E-TTL II metering system.
Is this answer helpful?
You change them using the Profoto app via Bluetooth settings, which offers 20 channels to avoid interference.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Button-free trigger design simplifies operation significantly
- Compatible with Profoto Air systems for advanced control
- Battery life exceeds 30 hours under typical usage conditions
- Auto mode sets correct flash power automatically in seconds
- Supports wireless firmware upgrades via the Profoto app
Disadvantages
- Indoor use only prevents outdoor moisture exposure risks
- Not compatible with third-party radio systems or non-Profoto flashes
- RF power output settings vary based on national regulations
- Device sleeps after 30 minutes of inactivity automatically
- Full power mode may be restricted in certain countries
Product Specification
Type
Other
Product Description
Unlock Creative Potential with Profoto Connect
Light is the essence of the image because without light, there is no image according to the Profoto Connect Manual. The Profoto product you hold in your hand is the result of over half a century of experience and expertise. It has been meticulously designed not just to deliver light but to deliver great light. Light that is natural and beautiful. This is your invitation to create.
Simplicity Meets Freedom
Profoto Connect is our very first button-free trigger. It has been created specifically for you, the aspiring image creator that wants to find new ways to be creative with photography. Now, you can create natural-looking light anytime, anywhere. This small and carefully designed pod allows you to trigger your lights from the top of your camera with just three settings: off, auto and manual. This is the power of simplicity. This is the freedom to create.
Seamless App Integration
Getting started is effortless. Attach the Profoto Connect to the camera hot shoe and turn it to AUTO. A good flash power will now be set for you automatically. For deeper control, open the Profoto app to get access to all additional features. You can adjust energy output, switch sync modes, and choose channels to avoid interference. The app also allows wireless firmware upgrades so you benefit from continuous product improvements.
Versatile Compatibility
Profoto Connect supports various camera brands including Canon, Nikon, Sony, Fuji, and Olympus. Each version uses the respective TTL metering system. It also triggers the Air Remote and Air Sync Profoto Air transceivers. However, it is not compatible with third-party radio triggering systems or non-Profoto flashes.
Advanced Safety
Do not operate the equipment before studying the safety instructions. Make sure safety instructions are always accompanied by the equipment. Profoto products are intended for indoor conditions use. Do not place or use the equipment where it can be exposed to moisture, extreme electromagnetic fields, or in areas with flammable gases or dust. Equipment must only be serviced by authorized personnel.
Technical Specifications
The radio system operates on the 2.4 GHz frequency band with 20 channels. Range is up to 300 meters under free line of sight conditions. The battery type is Li-Polymer with a typical lifetime of over 30 hours depending on usage. Charging is done via the USB-C port.
Final Thoughts
Congratulation on your new Profoto product. Enjoy your Profoto product! This device helps you grow and develop as an image creator. Light will open up a world of creative possibilities. Sign up to MyProfoto, to discover how image creators like you from all over the world use their Profoto products.
Notes: Reduce power output affects range. Ensure compliance with local RF regulations. The device sleeps after 30 minutes of inactivity.
Search for 67,706 Manuals online
Type-in Brand or Model