Manual.ly Logo

Profoto A1 Manual

0.0 · 0 Ratings

PDF manual · 40 Pages

English

M: QW-35-FL
page

/ 40

Loading...
2a6762756b0e3701fa3b1b3e4c21b8270c45 page 4
A1 AirTTL
4
www.profoto.com
General safety instructions
Safety Precautions!
Do not operate the equipment before studying the instruction manual and the accompanying safety.
Make sure that Profoto Safety Instructions is always accompanied the equipment! Profoto products
are intended for indoor conditions use. Do not place or use the equipment where it can be exposed to
moisture, extreme electromagnetic fields, or in areas with flammable gases or dust! Do not expose the
equipment to dripping or splashing. Do not place any objects filled with liquids, such as vases, on or near
the equipment. Do not expose the equipment to hasty temperature changes in humid conditions as this
could lead to condensation water in the unit. Do not connect this equipment to flash equipment from
other brands. Front lens shall be changed if it has become visibly damaged to such an extent that their
effectiveness is impaired, for example by cracks or deep scratches. Equipment must only be serviced,
modified or repaired by authorized and competent service personnel
WARNING – Electrical Shock Hazard – High Voltage!
Do not open or disassemble flashes, generators or lamp heads! Equipment operates with high voltage.
Generator capacitors are electrically charged for a considerable length of time after being turned off.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as direct
sunlight, fire, or the like.
Caution – Burn Hazard – Hot Parts!
If front lens cracks, it must be replaced before re-use of the equipment. Do not touch front lens during
operation it may reach high temperature.
Note about RF!
This equipment makes use of the radio spectrum and emits radio frequency energy. Proper care
should be taken when the device is integrated in systems. Make sure that all specifications within this
document are followed, especially those concerning operating temperature and supply voltage range.
Make sure the device is operated according to local regulations. The frequency spectrum this device
is using is shared with other users. Interference cannot be ruled out.
Laser radiation
IEC 60825-1, Edition 2.0 (2007-03). Wavelength at room temperature: 660 nm. Power through 7 mm
aperture at 100 mm distance in front of the exit window of the autofocus assist unit at room temperature:
< 300 µW. Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, date June 24, 2007.
Caution: Do not remove, disassemble or manipulate the laser auto focus assist light. Failure to comply
with this caution might lead to possible exposure to hazardous laser radiation.
Final Disposal
Equipment contains electrical and electronic components that could be harmful to the environment.
Equipment may be returned to Profoto distributors free of charge for recycling according to WEEE.
Follow local legal requirements for separate disposal of waste, for instance WEEE directive for electrical
and electronic equipment on the European market, when product life has ended!
CLASS 1
LASER PRODUCT

Chat with your Profoto A1 manual using AI

Get instant AI answers from your Profoto A1 manual

Ask anything about the Profoto A1. Answers come from this manual, with the pages they are based on.

A1 Maintenance Schedule

As needed
Replace damaged front lens

Replace the front lens if it has visible damage such as cracks or deep scratches that impair functionality.

As needed
Service by authorized personnel

Only authorized and qualified maintenance staff may service, modify, or repair the device.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend A1?

Yes No

Frequently Asked Questions

A

No, this model is designed specifically for Canon cameras using the E-TTL II system. Nikon users need the AirTTL-N version. Other brands require different compatibility checks before purchase.

Is this answer helpful?

A

Yes. It features an integrated transceiver that triggers wirelessly up to 300 meters. You can set up off-camera flashes to match the on-camera camera light perfectly.

Is this answer helpful?

A

On a full charge, you get approximately 350 full power flashes. Recharging takes about eighty minutes via the micro USB port. It supports high drain performance for continuous shooting.

Is this answer helpful?

A

Yes, the A1 supports High Speed Sync for faster shutter speeds. It maximizes frame rates during series shooting. This helps manage ambient light in bright conditions effectively.

Is this answer helpful?

A

It works with various magnetic modifiers including the dome diffuser, reflector card, and wide angle lens. These attachments change the light shape and direction quickly for different effects.

Is this answer helpful?

A

Yes, you can switch to manual mode for full control. Settings adjust in decimal increments for precision. TTL handles exposure automatically in other modes for faster work.

Is this answer helpful?

A

The flash charges within 0.05 to 1.2 seconds depending on the power setting. This allows for rapid firing during action sequences or multiple setup adjustments quickly.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compact size with studio level output power and natural light patterns.
  • Wireless AirTTL connectivity for multiple flash control up to 300 meters.
  • Magnetic modifier system allows quick lighting changes with accessories.
  • Precise manual power control available in decimal increments for exactness.
  • Built-in zoom ring matches beam angle to lens focal length automatically.
VS

Disadvantages

  • Battery life may limit long shoots without keeping extra spares charged.
  • Higher price point compared to basic speedlights and non-professional models.
  • Specific compatibility limits restrict use with non-Canon camera brands.
  • LCD display can be difficult to read in bright outdoor sunlight.
  • Flash recycle time is slightly slower for some high speed professional needs.
M: QW-35-FL

Product Specification

Guide Number

249.34 ft (ISO 100)

Focal Length

1.26-4.13 inches

AF Assist Light

Yes

Power Source

Li-ion Battery

Features

Wireless, Video Light

Dimensions

2.95x6.50x4.25 inches (WxHxD)

Weight

1.23 lbs

M: QW-35-FL

Product Description

Mastering Light with the Profoto A1 for Canon

Unlock Studio Quality on Location

Photographers seeking professional results without the bulk of studio gear find the perfect companion in the Profoto A1. This device is designed specifically with the Canon ecosystem in mind, ensuring full compatibility with your camera system. It represents the culmination of decades of lighting experience, condensed into a form factor that fits in your pocket. Unlike standard speedlights, the A1 delivers smoother, more natural light patterns due to its round flash head design. This circular light source creates a pleasing bokeh and gradient fall-off that enhances portrait work significantly.

Flexible Control Options

Control is key in photography. You can operate this unit in TTL mode for automatic exposure adjustments. The camera handles the power levels based on the scene. However, many professionals prefer the Profoto A1 for Canon Manual mode. This provides absolute authority over the output. You can adjust settings in tenth stops for pinpoint precision. The circular zoom ring allows you to match the beam angle to your lens focal length automatically or manually. This ensures efficient light distribution across your subject. Users can quickly switch between modes to adapt to changing lighting conditions.

Advanced System Connectivity

Connectivity is often the limiting factor for flash setups. The A1 removes this barrier with its built-in AirTTL technology. You can wirelessly trigger other Profoto flashes grouped together. This allows for multi-light setups without tripwires or sync cables. The system transmits signals over the 2.4 GHz band for a reliable link up to 300 meters. Groups can be independently controlled to balance ratios across the scene. This flexibility makes it suitable for complex commercial shoots.

Creative Modification

Shaping light is where art meets science. The magnetic mount system lets you attach modifiers in seconds. The dome diffuser creates soft, wrapping light ideal for skin tones. The reflector card bounces light with directionality for high contrast looks. The wide-angle lens expands coverage for architectural or environmental photography. These tools transform a single point source into a versatile lighting instrument. You can mix and match filters to alter the color temperature or intensity.

Performance and Safety

Durability and battery life matter. The unit features a robust lithium-ion battery providing up to 350 flashes on a full charge. Charging takes roughly eighty minutes. It also includes a built-in modeling light to visualize shadows. Safety features protect against high voltage risks. The front lens must be replaced if cracked. This ensures long-term reliability. Setup is intuitive with a clear LCD display.

Final Thoughts

Investing in this tool means prioritizing quality. The build quality reflects professional standards. Whether for studio portraits or on-location events, the A1 delivers consistent performance. It is an essential tool.

M: QW-35-FL

© Copyright 2026 Manual.ly