Manual.ly Logo

Profitec PRO 800 Manual

0.0 · 0 Ratings

PDF manual · 38 Pages

English

M: QW-35-FL
page

/ 38

Loading...
5f189898a04a27e8d2d8081f6969f04e21f2 page 20
ENGLISH
Translation of the original German user manual 31
6.4 Dispensing of hot water
1 Place a suitable container (with heat-insulated grip) underneath the hot water wand. Now you can
dispense hot water (e.g. for tea). When dispensing large amounts of water, it is advisable to turn the
machine off so that no cold water is pumped out of the fresh water tank.
2 After having dispensed hot water, turn the machine back on. The boiler is automatically refilled with
fresh water.
When the machine is switched off, more hot water can be dispensed.
However, one does not necessarily have to switch off the machine for dispensing hot
water.
Caution!
Always keep the hot water nozzle underneath the surface of the water while heating in
order to avoid splashing. Risk of injury
6.5 Dispensing of steam
The PRO 800 makes it possible to generate large amounts of steam in order to heat or froth beverages, e.
g. milk or punch. Therefore, within a few seconds, you can prepare milk froth. Please pay attention to the
instructions below. Do not bring the milk to a boil, otherwise frothing milk will not be possible.
1 Important: In order to get the best results when frothing milk, open the steam lever for approx. 5.
seconds to release the condensation water in the pipe. This also prevents milk from being sucked into
the boiler.
2 Immerse the steam nozzle (at the end of the steam dispenser) into the liquid.
3 Re-open the steam handle/steam lever.
4 Heat and/or froth the liquid.
5 After frothing or heating, release the steam into the drip tray to keep the holes of the steam nozzle
clean.
You can purchase the following steam tips from your dealer:
2-hole steam tip, item no. P2543
4-hole steam tip, item no. P2542
Risk of injury
Always keep the steam nozzle underneath the surface of the liquid while heating or
frothing in order to avoid splashing.
Important
After every application, clean the steam nozzle and the steam dispenser with a non-
abrasive, damp cloth; This removes possible liquid residues.
Risk of injury
Avoid skin contact with the steam dispenser while cleaning!
7 CLEANING AND MAINTENANCE
A regular and accurate care is very important for the performance, the longevity and the safety of your
machine.
Caution!
Always switch off the machine (power switch in lower position), disconnect the power cord
and let the machine cool down to room temperature (for at least 30 minutes) before
cleaning.
7.1 General cleaning
Daily cleaning:
Portafilter, filters, water tank, drip tray require daily cleaning. Clean with warm water and/or with a food
safe detergent.

Chat with your Profitec PRO 800 manual using AI

Get instant AI answers from your Profitec PRO 800 manual

Ask anything about the Profitec PRO 800. Answers come from this manual, with the pages they are based on.

PRO 800 Maintenance Schedule

Daily
Clean portafilter, filters, water tank and drip tray

Wash these parts daily with warm water and/or a food-safe detergent. Do not put them in the dishwasher.

Show in the manual (page 32)
After every use
Clean steam nozzle and wand

Wipe the steam nozzle and dispenser with a damp cloth after every use to remove liquid residues. Avoid skin contact as parts are hot.

Show in the manual (page 32)
As needed
Empty the drip tray

Empty the water drip tray regularly and do not wait until it is full to prevent overflow.

Show in the manual (page 32)
As needed
Clean brew group

Once cooled, clean the brew group with a cleaning brush and damp cloth. Never use a blind filter or clean while hot.

Show in the manual (page 32)
Periodic
Descale the machine

Perform prophylactic descaling if necessary. This must be done by an authorized dealer to avoid damage from lime residues.

Show in the manual (page 23)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend PRO 800?

Yes No

Frequently Asked Questions

A

Locate the switch behind the drip tray. Turn the valve towards the water adapter for direct connection and set the switch to position 1. For tank use, turn the valve away from the adapter and set the switch to position 0.

Is this answer helpful?

A

To prevent limescale damage, use soft drinking water with a maximum hardness of 4 degrees German hardness (4° dH). Using harder water may require frequent descaling or can cause permanent damage to the boiler.

Is this answer helpful?

A

Yes, the Profitec Pro 800 has a powerful steam wand capable of creating dry steam for frothing milk. Open the valve briefly to clear condensation before inserting the wand into cold milk for best results.

Is this answer helpful?

A

This usually indicates the grind is too fine or the tamping pressure is too high. Try coarsening the grind slightly and applying less pressure. Ensure the portafilter is seated correctly to avoid blockages.

Is this answer helpful?

A

The machine complies with EU safety standards and includes CE conformity. Repairs must be performed by authorized dealers to maintain validity. Contact your local dealer for specific warranty terms regarding parts and labor.

Is this answer helpful?

A

Clean the brew group regularly using a damp cloth and brush when the machine is cold. Never use a blind filter for cleaning as it can damage the gasket. Daily rinsing of the shower screen is also recommended.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Manual lever system provides full control over pressure curves for customized extractions
  • PID temperature control allows precise adjustment of boiler temperature for various roasts
  • Dual water supply options support both 3L tank usage and direct plumbing connections
  • Professional-grade build quality with durable materials designed for long-term reliability
  • ECO mode automatically powers down the machine to save energy after periods of inactivity
VS

Disadvantages

  • Requires significant learning curve to master manual lever pressure techniques effectively
  • Long warm-up time of approximately 40 minutes depending on ambient room temperature
  • Installation of direct water connection requires a qualified specialist technician
  • Machine does not have an automatic shut-off for the boiler unless ECO mode is enabled
  • Portafilter and drip tray components are not dishwasher safe and require hand washing
M: QW-35-FL

Product Specification

Type

Hand lever machine

Power

1600W

Color

stainless steel

Coffee system

Ground coffee

Water tank capacity

0.74 gallons

Features

2-cup function, hot water/steam nozzle, boiler pressure gauge, heated cup shelf, optional direct water connection

Dimensions

13.39x28.74x22.64 inches (WxDxH)

Weight

78.26 lbs

M: QW-35-FL

Product Description

Discover the Profitec Pro 800: The Ultimate Lever Espresso Machine

Welcome to the world of professional home espresso with the Profitec Pro 800. This machine represents a perfect blend of traditional lever mechanics and modern precision engineering. Designed for the serious coffee enthusiast, the Profitec Pro 800 offers an unparalleled brewing experience that puts you directly in control of every extraction. Whether you are pulling a single shot or preparing milk-based drinks, this machine delivers consistency and flavor that rivals commercial equipment.

The heart of the Profitec Pro 800 is its manual lever system. By physically controlling the pressure curve, you can customize the pre-infusion and extraction phases to highlight specific notes in your coffee beans. This hands-on approach allows for a level of creativity and mastery that automatic machines simply cannot match. The robust build quality ensures durability, while the sleek design fits beautifully in any kitchen setting.

Temperature stability is critical for great espresso, and the Profitec Pro 800 excels here thanks to its advanced PID temperature control. Located behind the drip tray, the digital display allows you to monitor and adjust the boiler temperature precisely. You can set the exact degree needed for different roast profiles, ensuring optimal extraction every time. Additionally, the ECO mode helps save energy by automatically shutting down the machine after a period of inactivity, making it both efficient and convenient for daily use.

Versatility is another key feature. The machine supports two water supply methods: a built-in 3-liter water tank for flexibility or a direct plumbing connection for continuous operation. When connected to mains water, the pump remains off, relying on line pressure to fill the boiler, which reduces noise and wear. For those who prefer the tank method, the integrated pump ensures reliable water delivery. Safety features include an anti-vacuum valve that vents the boiler during heating and clear indicators for water levels and operational status.

Cleaning and maintenance are straightforward, promoting longevity. The brew group is accessible for easy cleaning with a brush, and the steam wand includes interchangeable tips for different frothing styles. Regular descaling is recommended to prevent limescale buildup, especially if using hard water. The machine comes with a comprehensive set of accessories, including multiple portafilters and filters, allowing you to brew one or two cups simultaneously without changing equipment.

In summary, the Profitec Pro 800 is more than just a coffee maker; it is a tool for crafting exceptional beverages. Its combination of manual control, precise temperature management, and flexible water options makes it a top choice for anyone seeking to elevate their espresso game at home.

Important Notes

  • Always use soft water (max 4° dH) to protect the boiler from limescale.
  • Ensure the portafilter is fully locked before brewing to avoid injury from hot water spray.
  • Allow the machine to cool completely before performing deep cleaning tasks.
M: QW-35-FL

© Copyright 2026 Manual.ly