Manual.ly Logo

Profitec PRO 700 Manual

2.0 · 1 Ratings

PDF manual · 37 Pages

English

M: OA-GPT-54-NAN
page

/ 37

Loading...
de65ec0632c632bbeb4bbf553e0d1a8354fa page 20
ENGLISH
Bedienungsanleitung / User Manual PRO 700 - II 31
Risk of injury
Always keep the hot water nozzle underneath the surface of the water while heating in order
to avoid splashing.
6.6 Dispensing of steam
The PRO700 makes it possible to generate large amounts of steam in order to heat or froth beverages, e. g.
milk or punch. It is a professional and compact espresso coffee machine with an enormous steam volume.
Therfore, within a few seconds, you can prepare milk froth. Please pay attention to the instructions below. Do
not bring the milk to a boil, otherwise frothing milk will not be possible.
1 To dispense steam the steam boiler has to be switched on. Press the right switch behind the drip tray in
position ‘I’.
2 Important: In order to get the best results when frothing milk, open the steam lever for approx. 5.
seconds to release the condensation water in the pipe. This also prevents milk from being sucked into
the boiler.
3 Immerse the steam nozzle (at the end of the steam dispenser) into the liquid.
4 Re-open the steam handle / steam lever.
5 Heat and/or froth the liquid.
6 After frothing or heating, release some steam to keep the holes of the steam nozzle clean.
Risk of injury
Always keep the steam nozzle underneath the surface of the liquid while heating or frothing
in order to avoid splashing.
Avoid skin contact with the steam dispenser while cleaning!
Important
After every application, clean the steam nozzle and the steam dispenser with a non-
abrasive, damp cloth; This removes possible liquid residues.
7 CLEANING AND MAINTENANCE
A regular and accurate care is very important for the performance, the longevity and the safety of your
machine.
Caution!
Always switch off the machine (power switch in lower position), disconnect the power cord
and let the machine cool down to room temperature (for at least 40 minutes) before cleaning.
7.1 General cleaning
Daily cleaning:
Portafilter, filters, water tank, drip tray, drip plate of the drip tray require daily cleaning. Clean with warm
water and/or with a food safe detergent.
Portafilter, drip tray, drip grid and water tank are not suitable for the dish washer.
Clean the shower screen and the group gasket in the lower part of the group and remove visible dirt without
dissasembling the parts.
Cleaning as necessary:
Clean the steam and hot water valve after every use.
Clean the body when the machine is switched off and cold.

Chat with your Profitec PRO 700 manual using AI

Get instant AI answers from your Profitec PRO 700 manual

Ask anything about the Profitec PRO 700. Answers come from this manual, with the pages they are based on.

PRO 700 Maintenance Schedule

Daily
Clean portafilter and filters

Wash the portafilter, filters, water tank, drip tray, and drip plate daily with warm water and food-safe detergent.

Show in the manual (page 32)
Every 1-2 weeks
Refresh boiler water

Empty and refill the steam boiler water by dispensing hot water through the valve every one to two weeks.

Show in the manual (page 32)
Every 90-140 brews
Clean the brew group

Perform a cleaning using a blind filter and cleaner tablet or powder after approximately 90 to 140 brewing cycles.

Show in the manual (page 32)
After every use
Clean steam valves and wand

Clean the steam and hot water valves and the steam nozzle immediately after each use with a damp cloth.

Show in the manual (page 32)
As needed
Replace group gasket and shower screen

Change the group gasket and shower screen when they become worn or damaged to ensure proper function.

Show in the manual (page 33)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PRO 700?

Yes No
0
User Pic

AperiamAspernatur51

10 months ago

The coffee tastes great, but some reviews complain about bent parts, missing screws, and failures after weeks. Is the Pro 700 reliably assembled, and what should I do if items arrive damaged or loosen?

0
User Pic

Manual.ly

10 months ago

Many customers report excellent brewing quality, but like any complex appliance, individual units can arrive with assembly defects (e.g., misaligned parts, missing fasteners) or may need proper tightening after transport. If you notice damage, loose/absent screws, or unusual rattling on arrival, do not ignore it: inspect immediately, take clear photos, and contact your seller for warranty service or a replacement. If parts are only slightly loose, recheck the assembly according to the manual and ensure all screws are installed and tightened correctly. If a switch/lever contact fails after a short time, treat it as a warranty case and request repair or exchange rather than continued use.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

Yes. The machine supports both water tank operation and a direct water connection. A switch under the drip tray selects the mode, and the valve position must match the chosen water supply setup.

Is this answer helpful?

A

In general, it takes about 15 minutes to warm up, depending on room temperature. The PID display shows when the coffee boiler and steam boiler have reached their target temperatures.

Is this answer helpful?

A

Soft, potable water is recommended, ideally with a hardness of up to 4° dH. This helps protect the machine from limescale buildup and reduces the risk of internal damage.

Is this answer helpful?

A

A brew group cleaning is recommended after roughly 90 to 140 brewing cycles. The exact timing depends on use, and the PID display can show a cleaning reminder when programmed.

Is this answer helpful?

A

Yes. Press and hold the + button until the display turns off. A small dot remains visible to show the machine is still on. Press + again to reactivate the display.

Is this answer helpful?

A

Use cold milk, a narrow metal pitcher, and open the steam valve briefly first to release condensation. Keep the steam nozzle just below the milk surface and stop before the milk overheats.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Dual-boiler design lets coffee and steam temperatures be controlled separately.
  • PID display adds precise temperature management and useful programming options.
  • Works with either a water tank or a direct water connection for flexible installation.
  • Powerful steam output supports fast milk frothing and hot water dispensing.
  • Clear maintenance guidance helps keep performance consistent over time.
VS

Disadvantages

  • Installation and some adjustments should be handled by qualified service personnel.
  • Requires regular cleaning and maintenance to stay in top condition.
  • Needs soft water to reduce scale risk, which may require extra water treatment.
  • Not dishwasher-safe for several removable parts, so cleaning is more hands-on.
  • Designed for household use only, not for commercial environments.
M: OA-GPT-54-NAN

Product Specification

Construction type

Dual boiler

Power

1600W

Color

stainless steel

Coffee system

Coffee powder

Water tank capacity

2.8l

Special features

2-cup function, Hot water/steam nozzle, Boiler pressure gauge, Pump pressure gauge, Fixed water connection optional

Dimensions

13.39x16.54x23.23in (WxHxD)

Weight

68.54kg

M: OA-GPT-54-NAN

Product Description

Profitec Pro 700: A High-End Espresso Experience

The Profitec Pro 700 is built for coffee lovers who want precise control, strong steam power, and a more hands-on espresso routine. With the Profitec Pro 700 Manual, users can get familiar with everything from first setup to temperature programming, cleaning, and daily brewing habits. This machine is designed to support rich espresso extraction and smooth milk frothing while keeping operation clear and organized.

At the heart of the Pro 700 is a dual-boiler system with PID temperature control. That means the coffee boiler and steam boiler can be managed separately, helping you fine-tune flavor and performance. The machine can run either from a water tank or a direct water connection, which adds flexibility for different kitchen setups. A rotary pump, pressure gauges, and adjustable brewing pressure further reinforce its professional feel.

The user experience is centered on consistency. The PID display alternates between boiler temperatures, and it also supports useful functions like temperature programming, an ECO mode, and a cleaning reminder for the brew group. These features make the machine feel advanced without removing the manual character that espresso enthusiasts enjoy. It is clearly made for people who value control over convenience.

In daily use, the Pro 700 handles espresso, hot water, and steam with confidence. The brewing process is traditional: grind fresh coffee, tamp properly, lock in the portafilter, and pull the shot with the brew lever. Steam output is powerful enough for quick milk texturing, while the hot water wand adds versatility for tea or Americanos. The machine’s build, weight, and layout suggest durability and stability.

Maintenance is an important part of ownership, and the manual gives it serious attention. Regular rinsing, brew group cleaning, and occasional gasket or shower screen replacement help keep the machine performing at its best. Water quality also matters, with soft water strongly recommended to reduce scale buildup and protect the internal components.

Notes

  • Best suited for users who enjoy learning the craft of espresso
  • Requires careful setup and regular maintenance
  • Not intended for commercial use
  • Fresh coffee, correct grind, and proper tamping make a big difference

Overall, the Profitec Pro 700 Manual reflects a machine that rewards attention and technique. It is a serious home espresso setup for those who want both precision and a true café-style workflow.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly