Manual.ly Logo

PetSafe Microchip Cat Flap Manual

0.0 · 0 Ratings

PDF manual · 49 Pages

English

M: QW-35-FL
page

/ 49

Loading...
ec4fa5fc6707478b757fdf49958e14a8cf00 page 4
4
petsafe.com
ENFRES
NL
IT
DE
2. Drill four corner holes with a 12 mm (½”) diameter drill bit as marked on
the Cutting Template through the door. Ensure that the drill remains straight
and level.
3. Using a jig or key-hole saw, cut along the appropriate line as indicated
on the Cutting Template. (Fig. D).
4. Temporarily place the interior frame into the cutout. Level
the cat flap until it is in the proper position in the center
of the cutout. On the outside install the exterior frame.
Use a pencil to mark screw holes through the mounting
holes on the exterior frame (Fig. E).
5. Remove the interior and exterior frame and drill the
screw holes with a 6mm (¼”) drill bit (Fig. F). Ensure
that the drill remains straight and level.
6. Clean the area from any dust, dirt or debris.
7. From the interior of the home, insert the cat flap interior
frame into the opening.
8. From the exterior of the home, place the exterior frame
onto the interior frame.
9. Making sure to center the cat flap in the hole. Three (3) different lengths
of screws have been provided with this cat flap. Select the appropriate
length. Using a manual screw driver, screw the exterior frame to the
interior frame.
10. Insert the two blanking plugs over the screws on the exterior frame.
11. Remove the batteries from the cat flap and wait for 30 seconds. Re-install
the batteries and battery cover. The cat flap is ready to use.
Fig. E
Fig. F
The PetSafe
®
Microchip Cat Flap is suitable to fit most doors or partitions although
additional materials and competent DIY skills may be required. This cat flap is
designed to adapt easily to cut-out sizes for Staywell
®
200, 300, 400, 500, 900
and Petporte smartflap
™
series cat flaps. Some simple DIY skills are required and
minor adjustments to the cut-out or additional accessories might be needed.
Installation
–
Measurement and Marking
Measure the belly height
of your cat. This is usually
100 mm (3 ¹
₅
⁄₁₆”) –150 mm
(5 ¹
₅
⁄₁₆”) (Fig. A).
Mark this measurement on the
outside of your door and draw
a straight horizontal line 168 mm (6
₅
⁄₈”) long, preferably in the center of the
door (Fig. B).
Please keep in mind that this horizontal line will eventually be the bottom of the
hole you will cut in your door. The frame of the cat flap will be 25 mm lower. If
an installation adaptor is used, then the frame will be lower.
Note: This line may have to be raised slightly to allow for at least 50 mm (2”)
from the bottom of the door.
Important: Do not cut the tunnel. Key components are contained
within the tunnel and any alteration to the tunnel will affect functionality.
Installation – Wooden, PVC, or uPVC
Doors without Metal
Before beginning, please check if your door has a metal core. If a metal core
or metal plate is found, follow the
Installation – Metal or Metal Core
Doors instructions.
1. Attach the supplied Cutting Template
to the outside of your door in the
correct position ensuring that it is the
right way up and level (Fig. C).
(x)
Fig. A
(x)
Fig. B
(X)
Fig. C
(X)
Fig. D

Chat with your PetSafe Microchip Cat Flap manual using AI

Get instant AI answers from your PetSafe Microchip Cat Flap manual

Ask anything about the PetSafe Microchip Cat Flap. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Microchip Cat Flap?

Yes No

Frequently Asked Questions

A

The device can store up to forty microchipped cats in its internal memory, making it suitable for large households with multiple pets requiring individualized access control without needing frequent resets.

Is this answer helpful?

A

It requires four high-quality alkaline AA batteries. The system provides visual alerts via LEDs when power levels drop, prompting timely replacement to maintain full automatic functionality and security features.

Is this answer helpful?

A

It is designed for double-glazed units but requires a circular hole of 260 mm diameter installed by a professional glazier before manufacture. Post-manufacture holes cannot be cut into toughened glass panels safely.

Is this answer helpful?

A

Yes, it comes with a three-year non-transferable limited manufacturer warranty covering defects in material and workmanship for original retail consumers purchasing through authorized dealers directly.

Is this answer helpful?

A

It functions correctly within temperatures greater than minus twenty-five degrees Celsius and less than fifty-five degrees Celsius. Extreme cold outside this range may cause operational failure until conditions improve.

Is this answer helpful?

A

Yes, there is a four-way manual lock allowing directions for inside only, outside only, locked, or open. This helps transition pets familiarizing themselves with the mechanism before full automatic release activation begins.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Recognizes up to forty microchipped cats for secure multi-pet household management and easy entry control.
  • Fits multiple installation types including wood, PVC, metal cores, and glass surfaces with appropriate adapters.
  • Features LED low battery indicators to ensure continuous reliable operation without unexpected power failures.
VS

Disadvantages

  • Requires additional separate purchase of installation adaptors for metal doors or thick wall applications.
  • Cannot install in toughened or double glazed units without professional glazier intervention during manufacturing.
  • Limited operating temperature range excludes extreme cold below minus twenty-five degrees Celsius for functionality.
M: QW-35-FL

Product Specification

Type

Cat flap, Pet door

Color

white

M: QW-35-FL

Product Description

Product Overview

Welcome to the ultimate pet access solution featuring the PetSafe Microchip Cat Flap White. This advanced device ensures your feline friend enjoys freedom while effectively keeping unwanted animals out of your home. By utilizing specialized microchip technology, it recognizes your cat's unique identification number, allowing seamless entry without needing traditional collar tags or physical scratching. You might find this product detailed in the PetSafe Microchip Cat Flap White Manual for complete setup guidance covering every aspect of deployment. Ideal for modern homes, it fits various door types including wood, PVC, and metal partitions seamlessly. Even glass installations are possible with professional glazier assistance following specific safety protocols regarding toughened glass restrictions.

Key Features and Benefits

Security and convenience are balanced perfectly in this design for residential properties. The unit operates automatically when your programmed cat approaches the threshold but locks securely against stray intruders attempting unauthorized access. Up to forty microchipped pets can be stored in the internal memory module, making it highly suitable for multi-cat households sharing one household space comfortably. Energy efficiency is maintained with a manual close option alongside automatic locking mechanisms powered by four high-quality AA alkaline batteries. Low battery alerts appear via distinct LED indicator colors ensuring uninterrupted service until proper replacement occurs immediately. Temperature performance spans from minus twenty-five degrees Celsius up to fifty-five degrees Celsius, suitable for most global climates without failure risk inside.

Installation and Safety

Safety remains paramount throughout the entire installation process. Always check local building codes before modifying doors or walls physically. Professional glaziers are strongly recommended for all glass work as cutting toughened units is impossible post-manufacture dates legally. Do not attempt to alter the tunnel housing which contains vital internal components essential for function. Keep the included manual always with property documents for future owners selling the residence eventually. While not a security device itself according to manufacturer terms, the closing panel adds aesthetic value and helps reduce energy costs significantly. Remember that small children require constant supervision near the flap opening to prevent accidental hazardous exposures indoors. Programming is straightforward using learn mode where you simply guide your cat through the tunnel once per animal added. Once configured successfully, the flap unlocks instantly upon detection then re-latches after three seconds pass. If technical issues arise unexpectedly, factory reset functions are available in the interface menu easily accessible. For extensive customization regarding wall thickness requirements, optional extension tunnels exist though they are purchased separately from retailers. They offer customer support services for any queries regarding proper usage procedures or maintenance schedules required over time. This investment enhances companionship moments between owner and their beloved pet safely everywhere. Always respect regional recycling regulations when disposing of old electronic equipment responsibly at designated facilities nearby.

M: QW-35-FL

© Copyright 2026 Manual.ly