Manual.ly Logo

PetSafe Drinkwell Original Manual

0.0 · 0 Ratings

PDF manual · 85 Pages

English

M: GO-GEM-FL-25
page

/ 85

Loading...
769c2ce64e4bf715a087f154a55044a280d7 page 8
www.petsafe.net 9 8 www.petsafe.net
ENES FRIT NLDE
.
11 . Add water to the Bowl as needed. Do not let the water level fall below the Flow
Control Knob or you may risk Pump failure. Replacement Pumps are sold separately
by contacting the Customer Care Centre. Visit www.petsafe.net for a telephone listing
of the Customer Care Centre near you.
Pet Fountain Disassembly & Cleaning
Important: Pet Fountain must be cleaned to continue working normally.
CHARCOAL FILTER: The Charcoal Filter should be changed every two to four weeks.
1. Replace the Charcoal Filter more frequently when using the Pet Fountain for multiple
pets or pets that produce a lot of saliva.
2. The Charcoal Filter is an added feature of the Pet Fountain. The use of a filter is not
required for normal operation, but using a filter will keep the Pet Fountain water cleaner.
3. The Charcoal Filter may be rinsed out when the Pet Fountain is cleaned.
• Never wash the filters with soapy water, as the soap residue will
seep into the filters and cannot be removed. Only rinse the filters
with water.
• Use only PetSafe
®
brand authorised replacement filters. If
unauthorised filters are used it may void the warranty.
PET FOUNTAIN: Clean the Pet Fountain once a week.
1. Unplug the Pet Fountain and disconnect the In-Line Plug.
2. Remove Housing Lid and remove the Charcoal Filter.
3. Empty the water out of the Pet Fountain.
4. Remove the Housing by pressing in the side tabs and
lifting up (Fig. 4).
Important: The Flow Control Knob is attached to the
Pump. Do not attempt to remove the Pump by pulling on the
Flow Control Knob as this can damage or break the Pump.
5. Remove the Pump from its cavity by placing your index
finger behind Pump and gripping the bottom with your
thumb (Fig. 5).
6. Lift the Pump straight up – this may require slight force
until the suction cups release.
7. Next, remove the Pump from the Pet Fountain by
disengaging the rubber gasket (Fig. 6). Pull the In-Line
Plug up through the hole located next to the Pump.
Clean away any hair, debris or kibble that may have
accumulated around the Flow Control Knob and the
Faceplate of the Pump.
8. Once the Pet Fountain is completely disassembled you
will have 3 plastic parts.
Fig. 4
Fig. 5
Fig. 6

Chat with your PetSafe Drinkwell Original manual using AI

Get instant AI answers from your PetSafe Drinkwell Original manual

Ask anything about the PetSafe Drinkwell Original. Answers come from this manual, with the pages they are based on.

Drinkwell Original Maintenance Schedule

Remind me when maintenance is due
Weekly
Clean Pet Fountain

Unplug and disassemble fountain. Wash plastic parts with warm water and soap or in dishwasher top rack. Rinse thoroughly.

Every 2 weeks
Clean Pump

Disassemble pump and clean motor cavity with soap and water or diluted vinegar solution to prevent buildup.

Every 2-4 weeks
Replace Charcoal Filter

Change filter every two to four weeks. Rinse old filter with water only; do not use soap.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Drinkwell Original?

Yes No

Product Specification

Type

Water fountain

M: GO-GEM-FL-25

Product Description

M: GO-GEM-FL-25

© Copyright 2026 Manual.ly