PC-Electric EV11 Manual
PDF manual · 40 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your PC-Electric EV11 manual using AI
Get instant AI answers from your PC-Electric EV11 manual
Ask anything about the PC-Electric EV11. Answers come from this manual, with the pages they are based on.
EV11 Maintenance Schedule
Owner must regularly check the charging socket, coupling, and cable for defects, wear, dirt, and housing damage.
A qualified electrician must inspect the charging station and sub-distribution for function and safety once a year and document results.
Free maintenance reminders
Timed to your purchase date. Always free, unsubscribe anytime.
Ask a Question
Do you recommend EV11?
Yes NoFrequently Asked Questions
The EV11 supports 11 kW three-phase charging (16 A per phase) or 3.7 kW single-phase operation. It is rated for a nominal current of 16 A and requires appropriate supply wiring (5G2.5 mm² for 3~ or 3G2.5 mm² for 1~).
Is this answer helpful?
The EV11 uses a Type 2 vehicle coupling, the European standard for AC charging. Most modern EVs and plug-in hybrids with a Type 2 inlet are compatible. Ensure your vehicle supports Mode 3 charging and follow vehicle manufacturer instructions when connecting.
Is this answer helpful?
Install a dedicated supply circuit with a suitable MCB (B16 or C16) and an RCD Type A (IΔN ≤ 30 mA). The EV11 includes DC fault detection (>6 mA), so an RCD Type B is not required if national rules and the manual’s instructions are followed. Use surge protection where possible.
Is this answer helpful?
Yes, the EV11 is IP44-rated for outdoor use but must be sheltered from direct sunlight and strong water jets (no high-pressure cleaning). Mount it vertically on a flat, load-bearing wall or pedestal at a connector rest height of 0.5–1.5 m above ground, in a vibration-free location.
Is this answer helpful?
The LED indicates status: flashing green = ready, steady green = vehicle detected, blue = charging, red = fault. If red persists after removing the cable, contact support. Avoid direct eye contact with the LEDs.
Is this answer helpful?
Disconnect the vehicle and stop charging before maintenance. Wipe the exterior with a dry cloth; do not use water jets, aggressive chemicals, or abrasive materials. Perform visual inspections regularly and arrange an annual functional and safety check by a qualified electrician.
Is this answer helpful?
All installation, maintenance, repairs, and commissioning must be performed by qualified electrical personnel per national regulations. Use only original spare parts; unauthorized modifications void the warranty.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Supports up to 11 kW three-phase charging with 5 m fixed Type 2 cable for immediate use.
- Rugged PC/ABS housing and powder-coated steel cover with IP44 and IK08 protection for indoor/outdoor use.
- Built-in DC fault detection (6 mA RCM) simplifies protective device selection at the distribution board.
- Clear LED status indicators and automatic locking connector improve usability and safety.
- Compact, surface-mount design with standard M25 cable entry and Klippon®Connect terminal block for reliable wiring.
Disadvantages
- No integrated circuit breaker; requires an external B16/C16 MCB and RCD Type A in the supply board.
- Limited to 16 A nominal current—slower charging compared with higher-current home chargers.
- No fan support (EN 61851-1 Status D with fans not supported) limits sustained high-load thermal management.
- Fixed 5 m cable may be inconvenient for some parking arrangements and cannot be swapped easily.
- Installation and maintenance must be performed by qualified electricians, limiting DIY options.
Product Specification
Number of Charging Points
1
Max. Charging Power
11kW 3-phase, 3.7kW 1-phase
Number of Phases
3-phase
Voltage
400V (AC)
Max. Current per Phase
16A
Connector Type
Type 2
Connection Type
Cable 16.40 ft
Mounting
Wall Mounting
Special Features
Residual Current Device
Protection Class
IP44
Dimensions
9.76x13.27x4.88in (WxHxD)
Weight
10.25 lb
Product Description
PC-Electric Wallbox EV11 11kW, 5m charging cable Manual
The PC-Electric Wallbox EV11 is a compact, robust AC charging station designed for reliable home and light-commercial use. Offering up to 11 kW three-phase charging (or 3.7 kW single-phase), it comes with a permanently attached 5 m Type 2 charging cable, making it ready to use right out of the box. Built from impact-resistant PC/ABS with a powder-coated steel cover, the EV11 is rated IP44 for outdoor suitability and IK08 for mechanical protection.
Installation and commissioning are intended for qualified electrical personnel. The unit supports Mode 3 charging (Case C) and includes DC fault detection (6 mA RCM module), removing the need for an RCD Type B when installed per guidelines. Typical supply wiring is 5G2.5 mm² for three-phase 16 A service; a dedicated circuit breaker (B16 or C16) and residual current device type A (IΔN ≤ 30 mA) in the distribution board are required. The wallbox uses an M25 cable gland (8–17 mm) for incoming supply and a screwless Klippon®Connect terminal block.
Operationally, the EV11 uses a multi-color LED status indicator: green flashing for ready, steady green for vehicle detected, blue for charging, and red for faults. The vehicle socket locks automatically during charging; charging must be stopped before unplugging. Recommended mounting is vertical on a solid, vibration-free surface with the connector resting 0.5–1.5 m above ground. Environmental limits: -25 °C to +40 °C operation, storage -35 °C to +55 °C, up to 2000 m altitude, and protection against direct water jets.
Safety and maintenance emphasis: follow national electrical codes, perform initial safety checks (protective conductor continuity, insulation resistance, RCD trip tests) and document results. Annual inspection by a qualified electrician is recommended. Clean only with a dry cloth, avoid water jets and aggressive cleaners, and use original spare parts for repairs. Support and spare parts are provided by PC Electric (contact details included in the manual).
Notes:
- The EV11 is intended solely for charging electric and plug-in hybrid vehicles; adapters and non-approved modifications are prohibited.
- Use appropriate overcurrent and residual-current protection in the supply board and fit surge protection if possible.
- Do not operate a damaged unit; any repairs must be done by qualified technicians.
Search for 67,706 Manuals online
Type-in Brand or Model