Manual.ly Logo

Paulmann MaxLED Flow Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
5821cd3b0d2521baf27839d0ba44ccf07407 page 1
Safety Instructions
1, 2, 3, 4, 7, 9, 11, 12, 13, 14, 16, 17,
18, 19, 21, 33, 34
A
2
A
1
A
2
A
1
Safety
Instructions
Nr. 7, 10
Φ
5mm
r ≥ 40mm
a≥ 60°
r<40mm
a<60°
r ≥ 40mm
r ≥ 40mm
r ≥ 40mm
a≥ 60°
a≥ 60°
a≥ 60°
Safety
Instructions
Nr. 7, 10
Φ
5mm
max.30m
IP44
IP20
IP67
B
1x
1x
709.66
709.67
(+326)PPN 01/1
9
1x
1x
11x
13x
1x
13x
709.66
1x
1x
1x
21x
23x
1x
23x
709.67
1x
1x
1x

Chat with your Paulmann MaxLED Flow manual using AI

Get instant AI answers from your Paulmann MaxLED Flow manual

Ask anything about the Paulmann MaxLED Flow. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend MaxLED Flow?

Yes No

Frequently Asked Questions

A

The system transmits on the 2.4–2.4835 GHz band and radiated power is low (around 10 mW). It complies with applicable EU radio directives; consult Paulmann for the full declaration of conformity.

Is this answer helpful?

A

Yes — the strip includes cut points approximately every 5 cm. Only cut at designated marks and ensure correct re-connection and insulation of connections to prevent short circuits or damage.

Is this answer helpful?

A

Components reference IP20, IP44, and IP67 ratings; select the appropriately rated strip or housing for outdoor or moisture-prone locations. Ensure connectors and power supplies also meet the required IP protection level.

Is this answer helpful?

A

The controller supports at least three channels, enabling independent control of multiple LED circuits or zones. This allows separate color or brightness settings per channel for layered lighting designs.

Is this answer helpful?

A

Static color modes typically allow brightness adjustments but not speed. Dynamic modes vary: some permit speed changes (e.g., jumps, breath) while others lock brightness. Refer to mode descriptions when programming scenes.

Is this answer helpful?

A

Observe minimum bend radii and mounting clearances indicated, use the correct IP-rated components for the environment, ensure proper ventilation to avoid overheating, and connect the correct power supply and channel wiring to prevent damage.

Is this answer helpful?

A

Yes. The Basisset is approved for operation in European countries and meets relevant EU conformity requirements; check Paulmann’s website for official conformity documents and further compliance details.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Wide selection of static colors and many dynamic modes for flexible ambiance.
  • Multi-channel control lets you manage separate zones independently.
  • Cuttable every 5 cm for custom lengths and easy installation.
  • Supports brightness and speed adjustments in many modes for tailored effects.
  • Complies with EU radio regulations (2014/53/EU) and uses low-power 2.4 GHz transmission.
VS

Disadvantages

  • Some modes restrict brightness adjustment, limiting fine-tuning in those effects.
  • Different IP ratings across components require careful selection for wet environments.
  • Requires attention to minimum bend radii and mounting distances during installation.
  • Wireless range and performance may be affected by local interference or placement.
  • Power supply and channel wiring must be matched correctly for multi-zone setups.
M: OA-GPT-5-NAN

Product Specification

Old energy efficiency class of built-in light source

A (A++ to E)

Special features

dimmable, RGB color control, remote control

Protection class

IP67

M: OA-GPT-54-NAN

Product Description

Paulmann MaxLED Flow Basisset LED strip RGB Manual

The Paulmann MaxLED Flow Basisset is an RGB LED strip kit designed for flexible accent lighting with wireless control. The set offers vibrant color options, multiple dynamic modes, and compatibility for installations in homes and commercial settings across Europe. It operates on a 2.4 GHz radio frequency and includes channels for independent zone control, making it suitable for multi-zone lighting scenes and color transitions.

Product overview

This Basisset delivers a robust feature set: static color choices (red, green, blue, yellow, purple, cyan, white) and a range of dynamic effects such as multi-color jumps, breath effects, gradients, and strobe patterns. Brightness and speed adjustments are available depending on the chosen mode, enabling smooth fades or rapid color shifts. The controller supports at least three channels, allowing separate LED circuits or strips to be controlled individually.

The radio unit complies with EU regulations (2014/53/EU) and transmits in the 2.4–2.4835 GHz band with low radiated power. Installation notes reference protection ratings (IP20, IP44, IP67 for different components or mounting situations) and recommended minimum bend radii and mounting clearances for safe operation. The strip appears sectioned for cutting every 5 cm for custom lengths and can be coupled with appropriate power supplies and profiles.

Key features and usage

  • Multiple static colors and dynamic programs (3- and 7-color jumps, breaths, gradients, strobes) for varied ambiance.
  • Channel-based control for zoning and independent adjustments.
  • Brightness and speed controls; some modes lock brightness while allowing speed changes.
  • IP-rated components for different installation contexts; ensure the correct IP rating for your application.
  • Cut points at regular intervals for tailored lengths; follow minimum bend radii and mounting spacing.

Notes

  • The controller uses 2.4 GHz wireless; keep within recommended operating ranges and observe regional radio rules. Full conformity details are available from Paulmann.
  • Some modes do not allow brightness adjustment; check mode behavior when programming scenes.
  • Observe safety and spacing directions (minimum radii and distances) to avoid overheating or damage.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly