Paulmann MaxLED 250 Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Paulmann MaxLED 250 manual using AI
Get instant AI answers from your Paulmann MaxLED 250 manual
Ask anything about the Paulmann MaxLED 250. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend MaxLED 250?
Yes NoFrequently Asked Questions
The Tunable White range typically covers warm to cool white (e.g., around 2700K up to 6500K). Actual supported temperatures depend on the specific Paulmann controller used; consult controller specs for exact ranges.
Is this answer helpful?
No. The coated finish provides diffusion and basic protection against dust and light contact, but it is not a waterproof seal. For wet areas or outdoor use choose an IP65+ rated strip or install this strip inside a waterproof channel.
Is this answer helpful?
Use a stable 24V LED driver sized above the strip’s 9W consumption plus allowance for controllers and additional strips. A 24V, 12–24W driver is typical for a single 2.5m strip; size higher for multiple strips or extra accessories.
Is this answer helpful?
Yes. The strip can be cut only at marked cut points. Observe polarity and follow Paulmann’s cutting guidelines. After cutting, ensure proper end termination and connection to avoid damage.
Is this answer helpful?
An aluminum profile is recommended for improved heat dissipation and a clean aesthetic, especially in long runs or continuous installations. Profiles also protect the strip and enhance diffusion when paired with a diffuser cover.
Is this answer helpful?
Use a compatible Tunable White controller or a Zigbee/DMX system that supports dual-channel white adjustment. The controller enables scenes, fades, and smooth temperature transitions; ensure compatibility with your chosen 24V driver.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Tunable White lets you adjust color temperature for mood and task lighting
- Coated finish provides smoother light diffusion and reduced LED glare
- 2.5m length is convenient for continuous lighting runs without seams
- Low 9W power draw makes it energy efficient for extended use
- Compatible with standard 24V drivers and controllers for flexible control
Disadvantages
- Coating gives limited protection—not a substitute for waterproof (IP65+) strips
- Requires a compatible 24V driver and Tunable White controller to access full features
- May need aluminum profile for optimal heat dissipation and longevity
- Fixed 2.5m length might require joins for longer runs
- Not suited for outdoor or high-moisture installations without additional housing
Product Specification
Energy efficiency class built-in light source (old)
A (A++ to E)
Light source
9W, warm white-daylight white (2700-6500K), adjustable, 575lm
Features
dimmable, white tone control
Protection class
IP44
Dimensions
98.43x0.49in (LxW)
Product Description
Paulmann MaxLED 250 Strip LED strip 2.5m 9W Tunable White coated Manual
The Paulmann MaxLED 250 is a flexible 2.5 meter LED strip designed for modern interior lighting. Delivering 9W across its length, this Tunable White variant allows you to adjust color temperature to match task, mood, and time of day. The coated surface adds a subtle diffusion and basic protection, making the strip suitable for visible installations where a smooth light line and soft shadows are desired.
Compact and efficient, the MaxLED 250 balances low energy consumption with consistent output. Its tunable white range supports warm to cool whites, enabling warm ambient light for relaxing evenings or crisp daylight tones for workspaces. The coated finish reduces glare and helps blend the strip into profiles, coves, and open channels while keeping the LEDs protected from dust and light contact.
Installation is straightforward: the strip is compatible with 24V drivers commonly used in linear LED systems and supports connectors and controllers for dimming or effect functions. With appropriate drivers and a Tunable White controller you can switch between preset scenes or smoothly transition color temperature. The 2.5m length is ideal for accenting shelves, under-cabinet zones, or running along short coves without seams.
Durability considerations: the coated layer offers basic protection typically rated for indoor use (IP20 / IP44 depending on mounting and orientation). For wet or exposed areas, additional channels or higher IP-rated products may be preferable. The strip’s 9W consumption is economical, and when paired with efficient drivers it contributes to long-lasting, stable operation.
Why choose this strip? It’s a versatile option for homeowners and designers wanting tunable white control in a discrete package. The combination of a coated finish and flexible format makes it a practical choice for visible installations where light quality and low-profile aesthetics matter.
Notes:
- Works best with a 24V LED driver and a compatible Tunable White controller for full functionality.
- Coated finish softens the light but is not a waterproof seal—use channels or higher IP products for moisture-prone areas.
- Keep cut points and polarity in mind when trimming; follow Paulmann cutting guidelines.
Search for 67,706 Manuals online
Type-in Brand or Model