Manual.ly Logo

Parkside PKM 103 A1 Manual

0.0 · 0 Ratings

PDF manual · 56 Pages

English

M: QW-35-FL
page

/ 56

Loading...
fdcddd612215570d4c65e11b368fdfb3e9f9 page a
10
GB MT
Assembling the
collection container
1. Feed the two angled rods (13) through
the tabs of the collection container (3).
2. Loosen the two coupling nuts of the
connecting piece (11).
3. Insert the two free ends of the angled
rods into the connecting piece.
4. Tighten the coupling nuts of the
connecting piece.
5. Feed the straight rod (14) through the
tab of the collection container.
6. Loosen the two coupling nuts of the
connecting pieces (16).
7. Insert the two ends of the straight rods
(14) into one of the connecting pieces
(16) each.
8. Tighten the coupling nuts of the
connecting pieces (16).
9. Slide the grip bar (15) between the
tabs under the angled rods.
10. Clip the grip bar onto the angled rods.
Attaching the collection
container
1. Hold the collection container (3) at the
grip bar (
15).
2. Lower it onto the lower bars (2).
The two hooks have to be behind the
curvature inside the base; see the
detailed illustration
1
.
Setting the working
height
Adjust the working height of the device to
the surface you are working on. For asphalt
or plaster, select a lower working height
(brushes close to the ground). For lawns,
select a higher working height (brushes ad-
justed to the height of the lawn).
1. Loosen the adjusting screw (5).
2. Set the desired working height.
3. Tighten the adjusting screw.
Emptying the collection
container
1. Hold the collection container (3) at the
grip bar (
15).
2. Lift it out from between the lower bars.
3. Empty the collection container.
4. Re-attach the collection container onto
the device.
Replacing the
brushes
1. Pull the four brushes (17) towards the
centre and out of the holder.
2. Slide the brushes (17) into the holder.
Maintenance
Only use original parts.
Always check the device before using it
for obvious defects such as loose, worn or
damaged parts, correct the positioning of
screws or other parts. Replace damaged
parts.
Cleaning
Do not use any cleaning agents or
solvents. Chemical substances may
attack the plastic parts of the de-
vice. Never clean the device under
running water.
• Clean the surfaces thoroughly after
each use with a soft brush, paintbrush
or cloth.
• Turn the device over and clean the
brushes (17).

Chat with your Parkside PKM 103 A1 manual using AI

Get instant AI answers from your Parkside PKM 103 A1 manual

Ask anything about the Parkside PKM 103 A1. Answers come from this manual, with the pages they are based on.

PKM 103 A1 Maintenance Schedule

Before each use
Inspect device for damage and loose parts

Check the device before each use for obvious defects such as loose, worn or damaged parts. Ensure screws and other components are correctly positioned.

After each use
Clean surfaces with soft brush or cloth

Clean the surfaces thoroughly after each use with a soft brush, paintbrush, or cloth. Do not use cleaning agents or solvents.

Show in the manual (page 10)
After each use
Clean the brushes

Turn the device over and clean the brushes (17). Never clean the device under running water.

Show in the manual (page 10)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend PKM 103 A1?

Yes No

Frequently Asked Questions

A

The working width measures 53.5 cm which allows you to cover a significant amount of ground with each pass. This wide sweep helps reduce the total time needed to clear larger areas effectively.

Is this answer helpful?

A

No, you should never clean the device under running water. Chemical substances and flowing water can attack the plastic parts. Use a soft brush or cloth instead.

Is this answer helpful?

A

No, the device is intended for do-it-yourselfers in the home sector. It was not designed for heavy commercial use. Using it commercially will void the warranty.

Is this answer helpful?

A

To store the device space efficiently, you can fold the handle onto the lower bars. Simply loosen the wing nuts on the lower bars and fold the handle down.

Is this answer helpful?

A

Spare parts and accessories are available online at the specified shop website. Contact your local service center for guidance on specific component availability.

Is this answer helpful?

A

Always wear closed shoes during operation. When emptying the collection container, wear gloves to protect against cuts from sharp objects like glass or metal hidden in debris.

Is this answer helpful?

A

Loosen the adjusting screw on the side. Move the device to the desired position for your surface type such as low for asphalt or high for grass. Then tighten the screw to fix the height.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Large 103 liter container reduces emptying frequency
  • Lightweight design at 6.7 kg is easy to handle
  • Adjustable working height suits grass and pavement
  • Foldable handle enables space saving storage
  • Includes all necessary assembly hardware for quick setup
VS

Disadvantages

  • Limited to residential DIY use not suitable for commercial jobs
  • Cannot sweep up liquids or flammable hazardous materials
  • Must avoid using chemicals or water for cleaning purposes
  • Manual pushing required so fitness level matters somewhat
  • Warranty voided immediately if used for business activities
M: QW-35-FL

Product Specification

Handle

Plastic

Cutting width

21.65 in

Features

Grass Bag 27.21 gal

Weight

14.77 lbs

M: QW-35-FL

Product Description

Parkside PKM A1 Leaf and Grass Collector Overview

Garden maintenance often presents challenges when dealing with excess foliage and cut grass during seasonal changes. The Parkside PKM A1 Leaf and Grass Collector offers a robust solution for homeowners seeking efficiency in their outdoor care routine. This device allows for simple raking and collection of leaves, verticutting residue, and lawn clippings without requiring heavy physical labor compared to traditional rakes. It performs exceptionally well on various surfaces including maintained lawns, paved stone walkways, and asphalt driveways.

A major advantage is the large 103-liter collection container which significantly reduces the frequency of stopping to empty the bin during a task. The machine weighs approximately 6.7 kg making it lightweight enough for most adults to maneuver comfortably yet stable enough for tough debris. The effective working width is 53.5 cm allowing coverage of a good area per pass. Users can easily adjust the working height to match the current ground level precisely. For hard surfaces like smooth asphalt or cobblestone, the brushes sit closer to the ground for maximum contact. For natural grassy areas, the height increases automatically to match the turf length preventing damage to the roots. An adjusting screw secures the chosen position firmly to prevent slipping during operation.

Assembly is designed to be user friendly involving attaching legs and the handle using included screws and wing nuts within minutes. Storage becomes effortless because the handle folds down completely to save valuable garage or shed space. Users must fold the handle up for transport to ensure safety. Safety remains paramount so users must always wear closed shoes and keep a lookout for children or pets nearby. Heavy duty gloves are recommended when emptying the bin to avoid cuts from sharp debris hidden like glass shards. The device cannot clean liquids or flammable substances. Cleaning should never involve harsh chemical solvents or direct running water as these damage the internal plastic parts over time. Instead a soft brush or microfiber cloth cleans the surfaces safely after each use. The device is intended for private home use only and commercial warranties may not apply if used professionally in businesses. Proper disposal involves recycling metal and plastic parts through local centers to protect the environment. Spare parts are available online ensuring long term usability and repairability of the unit. Importers and service centers exist globally for support providing phone and email help. Owners should scan the QR code to view full operating instructions digitally. Warranty is voided upon commercial misuse. Regular inspection of screws and protective covers before every use helps maintain peak performance and longevity of the equipment.

M: QW-35-FL

© Copyright 2026 Manual.ly