Manual.ly Logo

Park Tool BKM-1 Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
b03c321086166c3e689f43686aa32a5f172d page 1
5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
PARK TOOL CO.
BKM-1 Hydraulic Brake Bleed Kit — Mineral
The BKM-1 Hydraulic Brake Bleed Kit—Mineral will bleed most models of
mineral oil based bicycle brakes. The BKM-1 includes the syringes, hoses
(including shut off clips), bleed blocks, bleed funnel, frame attachable syringe
mount, and adaptors needed to service Shimano
®
, Magura
®
, Clarks™,
Promax
®
, Tek tro
®
, TRP
®
, Formula™, and other brands. Includes a case to
keep everything organized. The BKM-1 Hydraulic Brake Bleed Kit does not
include brake fluid.
Safety Warning:
Wear safety glasses and gloves while bleeding brakes and avoid all fluid
contact with eyes and skin.
FOLLOW BRAKE FLUID MANUFACTURER’S SPECIFIC
RECOMMENDATIONS REGARDING CONTACT, INGESTION, CLEANUP AND
DISPOSAL INSTRUCTIONS.
Notes:Bleeding tools and syringes for mineral fluid brakes should never
be used for DOT brake systems or with DOT brake fluid. The DOT fluid and
Mineral oils should never be mixed in the brake system or in their respective
service tools. Using incompatible fluid may cause seal failure which may
result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1
Hydraulic Brake Bleed Kit—DOT.
The specific service parts and adaptors for brake bleeding vary with each
brand. Inspect the brake and the bleed port fittings to determine the correct
adaptor from the BKM-1. Measure the bleed port fitting thread diameter to
match with the correct BKM-1 adaptors. To match thread pitch, hold the two
threads one on top of the other to see if threads properly mesh together. See
parts description for details on the parts and adaptors and their common uses.
When storing the hose assemblies, leave the closing clips open. Remnant
mineral oil will not harm syringes or seals. Clean syringes, hose and fittings
with alcohol when necessary.
Although all hydraulic brake service shares the concept of injecting new
fluid and bleeding out air and old fluid, there are many variations on the
procedures to bleed particular makes and models. See the repair help area
of www.parktool.com for detailed video instructions on bleeding brakes, or
contact the brake manufacturer for their specific bleeding procedures.
For complete videos and instructions, visit www.parktool.com.
Vollständige Videos und Anweisungen finden Sie unter www.parktool.com.
Para ver videos completos e instrucciones, visite www.parktool.com.
Pour des vidéos et des instructions complètes, visitez www.parktool.com.
Part # Description Notes
2592-2 Mineral Oil Syringe
Syringes with removable handles and plungers to allow cleaning. The syringe body uses
internal M6 x 1.0mm thread to accept hose assemblies 2593A and 2594A.
2594A Mineral Oil Hose Assembly
Hose assemblies with closing clip and adaptors. One end is M6 x 1.0mm thread to fit syringe.
Opposite end is M5 x 0.8mm external thread to accept other adaptors.
2593A Mineral Oil Hose Assembly—Open End
Hose assembly with closing clip and one M6 x 1.0mm thread to fit syringe. Opposite end open
for calipers with bleed nipples.
2588 Hose Compression Sleeve Slides over open hose to help secure the hose to caliper bleed nipple
2583A Bleed Funnel
Bleed funnel including stopper for funnel hole. M5 x 0.8mm external thread used to bleed
many Shimano
®
brake model.
2586A
Bleed Funnel Extension for Shimano
®
with O-Ring (Silver)
Extension adaptor for bleed funnel. External M7 x 0.75mm thread fits Shimano
®
road lever
bleeding port. Internal thread fits bleed funnel.
2585-2 Adaptor for Hayes
®
—M5 x 0.8mm (Silver) Adaptor for Hayes
®
and others
2587A
Adaptor for Magura
®
with O-Ring—
M6 x 0.75mm (Blue)
Adaptor for Magura
®
levers, and bleed ports in other brands
2584AM
Universal Adaptor with O-Ring—
M6 x 1.0mm (Black)
Adaptor for M6 x 1.0mm
2625A
Adaptor for Promax
®
with O-Ring—
M6 x 1.0mm (Green)
Adaptor for Promax
®
and other brands
2623A
Adaptor for Formula™ Cura™ with
O-Ring—M5 x 0.8mm (Purple)
Adaptor for Formula™ Cura™, Tektro
®
, Hayes
®
and others
2581-2 Universal Bleed Block Double sided block with 10mm and 12mm. Two blocks include for double piston calipers.
2578A Syringe Holder Assembly with Strap Syringe holder secures syringe to fork or rear stay during bleed
2596-3 Extra Hose Section Section of extra hose for system bleeding into disposal bag
2595 Fluid Disposal Bag Fluid disposal bag for calipers that bleed directly to disposal system
2582-10 Mineral Oil Adaptor O-Ring Extra O-ring for adaptors
2624-2 Mineral Oil Adaptor O-Ring Extra O-ring for 2623A adaptors
TABLE 1
BKM-1 Instructions

Chat with your Park Tool BKM-1 manual using AI

Get instant AI answers from your Park Tool BKM-1 manual

Ask anything about the Park Tool BKM-1. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend BKM-1?

Yes No

Frequently Asked Questions

A

It supports most mineral oil-based hydraulic disc brakes from brands like Shimano, Magura, and Formula. It is not designed for DOT fluid systems.

Is this answer helpful?

A

No, the kit does not include brake fluid. You must purchase the appropriate mineral oil separately before starting any maintenance work.

Is this answer helpful?

A

Absolutely not. Using mineral oil syringes for DOT fluid can damage seals and compromise brake safety due to chemical incompatibility.

Is this answer helpful?

A

Inspect the bleed port threads and match the diameter and pitch using the included guide or by comparing threads manually to ensure a proper fit.

Is this answer helpful?

A

Detailed video instructions and written guides are available on the Park Tool website under the repair help section for step-by-step assistance.

Is this answer helpful?

A

Follow the fluid manufacturer's instructions immediately for cleanup and disposal to avoid environmental harm and ensure personal safety.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Comprehensive kit covering most major mineral oil brake brands
  • Includes specialized adaptors for precise fitting across different systems
  • Syringes feature removable parts allowing for thorough cleaning and maintenance
  • Organized storage case keeps all components secure and prevents loss
  • Frame-mount syringe holder allows for convenient hands-free operation during bleeding
VS

Disadvantages

  • Does not include brake fluid requiring a separate purchase for operation
  • Not compatible with DOT fluid systems which could lead to seal failure
  • Requires careful selection of adaptors based on specific thread types and brands
  • Initial setup and procedure learning curve may be complex for beginners
  • Specific bleeding procedures vary significantly by brand requiring extra research
M: QW-35-FL

Product Specification

Type

Ventilation Kit

Compatibility

Shimano, Magura, Clarks, Promax, Tektro, TRP

M: QW-35-FL

Product Description

Mastering Hydraulic Brake Maintenance with the Park Tool BKM-1 Bleeding Kit

The Park Tool BKM-1 Bleeding Kit is an essential tool for any bicycle mechanic or enthusiast looking to maintain hydraulic disc brakes. This comprehensive kit is specifically designed to bleed most models of mineral oil-based bicycle brakes, ensuring optimal performance and safety on the road or trail. Whether you are servicing Shimano, Magura, Clarks, Promax, Tektro, TRP, Formula, or other brands, this kit provides all the necessary components to get the job done right.

What sets the BKM-1 apart is its completeness. The kit includes high-quality syringes with removable handles and plungers for easy cleaning, various hose assemblies with shut-off clips, bleed blocks, a bleed funnel, a frame-attachable syringe mount, and a wide array of adaptors. These adaptors cover different thread sizes and brand-specific requirements, making it versatile enough for almost any mineral oil brake system. Everything fits neatly into a durable case, keeping your workspace organized and your tools protected.

Safety is paramount when working with brake fluids. The kit comes with clear instructions to wear safety glasses and gloves, avoiding contact with eyes and skin. It is crucial to follow the specific recommendations of the brake fluid manufacturer regarding disposal and cleanup. Remember that this kit is strictly for mineral oil systems; never mix DOT fluid with mineral oil as it can cause seal failure and catastrophic brake failure. For DOT systems, a different kit is required.

Proper maintenance involves more than just bleeding. Regularly inspect your brake ports to ensure you have the correct adaptor. When storing hoses, leave the closing clips open to prevent damage. Cleaning the syringes and fittings with alcohol keeps them in top condition. For detailed video tutorials and step-by-step procedures, users are encouraged to visit the official repair help area online.

Key Notes

  • Always use the correct adaptor for your specific brake brand.
  • Never mix DOT fluid and mineral oil in the same system.
  • Clean all components with alcohol after use.
  • Refer to manufacturer guides for specific bleeding procedures.

Pros and Cons

Pros

  • Comprehensive kit covers most major mineral oil brake brands.
  • Includes specialized adaptors for precise fitting.
  • Syringes feature removable parts for thorough cleaning.
  • Organized storage case keeps all components secure.
  • Frame-mount syringe holder allows hands-free operation.

Cons

  • Does not include brake fluid, requiring separate purchase.
  • Not compatible with DOT fluid systems without risk of damage.
  • Requires careful selection of adaptors based on thread types.
  • Initial setup may be complex for beginners unfamiliar with hydraulics.
  • Specific procedures vary by brand, needing extra research.

Frequently Asked Questions

What types of brakes does the BKM-1 support? It supports most mineral oil-based hydraulic disc brakes from brands like Shimano, Magura, and Formula. It is not for DOT fluid systems.

Does the kit come with brake fluid? No, the kit does not include brake fluid. You must purchase the appropriate mineral oil separately.

Can I use these syringes for DOT fluid? Absolutely not. Using mineral oil syringes for DOT fluid can damage seals and compromise brake safety.

How do I choose the right adaptor? Inspect the bleed port threads and match the diameter and pitch using the included guide or by comparing threads manually.

Is there a warranty on the kit? Park Tool products generally come with a limited warranty; check the official website for specific terms on the BKM-1.

Where can I find bleeding instructions? Detailed video instructions are available on the Park Tool website under the repair help section.

What should I do if I spill brake fluid? Follow the fluid manufacturer's instructions immediately for cleanup and disposal to avoid environmental harm.

M: QW-35-FL

© Copyright 2026 Manual.ly