Manual.ly Logo

Palram Canopia Roma Manual

0.0 · 0 Ratings

PDF manual · 69 Pages

English

M: QW-35-FL
page

/ 69

Loading...
531b07a554154de73f5901a88fff58fdcfc9 page a
IMPORTANT
Please read these instructions carefully before you start to assemble this product.
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
Safety advice
.
For safety purposes we strongly recommend the product to be assembled by
at least two people.
. Some parts may have sharp edges. Please be careful when handling components.
Always wear gloves, eye protection, and long sleeves when assembling or performing any
maintenance on your product.
Do not attempt to assemble the product in windy or wet conditions.
Do not attempt to assemble the product if you are tired, have taken drugs,
medications or alcohol, or if you are prone to dizzy spells.
. Dispose of all plastic bags safely - keep them away from children's reach.
. Keep children away from the assembly area.
When using a stepladder or power tools, make sure that you are following the
manufacturer's safety advice.
. Do not climb or stand on the roof.
. Do not hang or lay on the profiles.
Heavy articles should not be leaned against the poles.
Keep roof and gutters clear of snow, dirt & leaves.
.
Heavy snow load on the roof can make it unsafe to stand below or nearby.
If color was scratched during assembly it can be fixed.
Cleaning instructions
In order to clean the product, use a mild detergent solution and rinse with
cold clean water.
Do not use acetone, abrasive cleaners, or other special detergents to clean the panels.
Clean the product once assembly is complete.
Before Assembly
Choose your site carefully before beginning assembly.
The ground surface must be perfectly flat and leveled and have a solid base such
as concrete, asphalt, deck etc.
Sort the parts and check against the content parts list.
Parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl
so they do not get lost.
Please consult your local authorities if any permits are required prior to constructing
the product.
A
Attention
Please make sure you install the panels with the UV protected side
out (marked with "THIS SIDE OUT") and remove the sticker as panels are in place.
During Assembly
When encountering the information icon, please refer to the relevant assembly
step for additional comments and assistance.
During assembly use a soft surface below the parts to avoid scratches
and damages.
Steps
Step 3: It is recommended to use a cardboard or other soft material under the lowered
corner in order to avoid scratches and peeling of paint.
Step 10: Optional!
Threading an electrical cable (for a fan or lamp etc.) is possible through the roof & legs
profiles. There are 2 options through the leg; one of them requires a special drill bit.
Step 15: Note that the triangle's both sides are equal as shown in Diagram b. Insert
the screw into the hole in Profile 8200 without pressing the panel.
Step 24: Optional!
Optional - if you wish to add Palram's Curtains or Netting Set, please thread the
plastic clips through the rail in each profile.
(Palram's Curtains / Netting Set are not supplied).
Step 26: Please level the profiles' legs and adapt screws and plugs to your specific
ground type.
* Please tighten all screws when completing assembly.
Note:
Anchoring this product to the ground is essential to its stability and rigidity.
It is required to complete this stage in order for your warranty to be valid.

Chat with your Palram Canopia Roma manual using AI

Get instant AI answers from your Palram Canopia Roma manual

Ask anything about the Palram Canopia Roma. Answers come from this manual, with the pages they are based on.

Canopia Roma Maintenance Schedule

As needed
Clean the gazebo panels

Use a mild detergent solution and rinse with cold clean water. Do not use acetone or abrasive cleaners.

Show in the manual (page 10)
Seasonal/As needed
Clear roof and gutters of debris

Keep roof and gutters clear of snow, dirt, and leaves to prevent unsafe loads and blockages.

Show in the manual (page 10)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Canopia Roma?

Yes No

Frequently Asked Questions

A

Yes, anchoring the product to the ground is essential for its stability and rigidity. You must complete this stage for your warranty to remain valid.

Is this answer helpful?

A

For safety purposes, we strongly recommend that the product be assembled by at least two people to handle components properly.

Is this answer helpful?

A

Yes, it is optional to thread an electrical cable through the roof and leg profiles for items like fans or lamps. Some options may require a special drill bit.

Is this answer helpful?

A

Use a mild detergent solution and rinse with cold clean water. Do not use acetone, abrasive cleaners, or special detergents as they may damage the surface.

Is this answer helpful?

A

Always install the panels with the UV protected side facing outwards. This side is clearly marked with the text THIS SIDE OUT.

Is this answer helpful?

A

Heavy snow load can make it unsafe to stand below or nearby. You must keep the roof and gutters clear of snow to maintain structural integrity.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Hexagonal design provides ample space and aesthetic appeal
  • UV-protected polycarbonate panels ensure durability and sun safety
  • Optional electrical cable threading allows for added convenience
  • 10-year limited warranty covers defects in materials and workmanship
  • Easy assembly with clear multilingual instructions provided
VS

Disadvantages

  • Anchoring to the ground is mandatory for warranty validity
  • Some metal edges can be sharp requiring careful handling
  • Assembly requires at least two people for safety
  • Harsh chemicals cannot be used for cleaning the panels
  • Snow load must be cleared regularly to prevent structural stress
M: QW-35-FL

Product Specification

Color

gray

Frame Material

Aluminum

Roof Material

Polycarbonate

Side Panels

No

Shape

Hexagonal

Features

UV-resistant, weatherproof

Dimensions (LxWxH)

13.60 x 11.78 x 10.00 ft

M: QW-35-FL

Product Description

Discover the Palram Canopia Roma Gazebo Pavilion Gray

Transform your outdoor living space with the Palram Canopia Roma Gazebo Pavilion in a sophisticated gray finish. This hexagonal garden structure offers an elegant blend of style and functionality, designed to provide a perfect shelter for relaxation or social gatherings. Whether you are looking to create a cozy reading nook or a shaded dining area, this gazebo stands as a testament to quality craftsmanship.

The assembly process is streamlined with clear instructions found in the Palram Canopia Roma Gazebo Pavilion gray Manual. Before you begin, ensure your foundation is solid, leveled, and free of debris. The manual recommends using concrete or a wood deck for optimal stability, though soil or asphalt foundations are possible with proper anchoring. Safety is paramount during installation; it is highly advised that at least two people assemble the unit to handle parts safely and avoid injury. Always wear protective gear such as gloves and eye protection.

Once assembled, the UV-protected panels ensure long-lasting durability against the elements. Remember to install the panels with the UV side facing outward, marked clearly on the material. Optional features include the ability to thread electrical cables through the roof profiles for lighting or fans, adding versatility to your new pavilion. Regular maintenance involves cleaning with mild detergent and cold water, avoiding harsh chemicals like acetone. Proper anchoring to the ground is not just recommended but essential for maintaining the product's warranty validity. Enjoy years of outdoor comfort with this robust and stylish addition to your home.

M: QW-35-FL

© Copyright 2026 Manual.ly