Manual.ly Logo

Omnitronic WC-4 Manual

5.0 · 1 Ratings

PDF manual · 12 Pages

English

M: QW-35-FL
page

/ 12

Loading...
f6b413d9de25368e872992388ebeceafd618 page b
00036596.DOC, Version 1.1
11/12
4.2 Choosing an appropriate PA amplifier
This speaker must only be connected with an appropriate PA amplifier. Observe the correct power matching.
The total load presented to the amplifier must not exceed the rated output of the amplifier. An incorrect
matching may damage the PA amplifier.
Before starting with the installation, you must clarify how many speakers you would like to install in the room.
4.3 Electrical connection
DANGER TO LIFE!
High voltage at terminals. Installation by skilled personnel only! Turn off PA system before connecting.
Cabling a PA system is an electric installation which must only be carried out by a qualified electrician!
Always insulate the connection cables which are not used. Pay attention to the correct power matching.
Overload will result in damage of the PA amplifier and of the speaker.
Procedure:
Step 1: If the PA system is turned on, turn it off before making any connection.
Step 2: Connect the speaker via two of the cables to the 100 V output of the PA amplifier: Use the black
core COM (negative pole) and, according to the desired power rating, either the white core for
3 W or the red core for 6 W.
Step 3: When connecting several speakers, make sure that all speakers have the same polarity and that
the amplifier is not overloaded.
5. OPERATION
Switch on the amplifier. Adjust the volume with the volume control.
Always make shure that the output signal is not distorted and that your speakers will not get damaged.
During operation, please make sure the speaker always sounds well. When distorsions can be heard, either
the amplifier or the speaker is overloaded. Overloads can quickly lead to amplifier or speaker damage.
In order to avoid damage, please reduce the volume immediately when distortions can be heard. When
speakers are destroyed by overload, the guarantee becomes void.
Always check the sound pressure level with a meter in order to keep to the threshold.
6. CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the speaker systems or parts of the speaker system have to be tightly
connected and must not be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.

Chat with your Omnitronic WC-4 manual using AI

Get instant AI answers from your Omnitronic WC-4 manual

Ask anything about the Omnitronic WC-4. Answers come from this manual, with the pages they are based on.

WC-4 Maintenance Schedule

Remind me when maintenance is due
Yearly
Inspect installation by skilled person

Ensure safety-related installations are inspected once a year by a skilled person for screw tightness, deformations, and cable damage.

Show in the manual (page 11)
Every 4 years
Expert acceptance test inspection

Have safety-related and machine-technical installations approved by an expert in an acceptance test every four years.

Show in the manual (page 11)
Before every operation
Check speaker and mounting security

For public use, check before every operation that the speaker system and internal speakers are securely fixed.

Show in the manual (page 12)
Regularly
Clean the speaker housing

Frequently clean dust and dirt using a soft, lint-free, moistened cloth. Never use alcohol or solvents.

Show in the manual (page 12)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WC-4?

Yes No
0
User Pic

mgraham24

6 months ago

How long does standard shipping take? I want to ensure timely arrival.

0
User Pic

Manual.ly

6 months ago

Standard orders are processed and shipped within 1 to 3 business days. Many customers report receiving their items quickly and in good condition. We monitor our logistics closely to maintain this speed. Please check your order confirmation email for the specific tracking details once shipped.

M: QW-35-FL
M: QW-35-FL

Frequently Asked Questions

A

No, the device is designed for indoor use only. Exposure to rain, moisture, or fog can cause damage and safety hazards.

Is this answer helpful?

A

The speaker offers selectable wattage via terminal selection. You can choose between 3 W RMS with the white terminal and 6 W RMS with the red terminal.

Is this answer helpful?

A

No, you must use a soft damp cloth. Alcohol or solvents can damage the plastic housing and finish.

Is this answer helpful?

A

Only qualified electricians or trained professionals should install the unit due to the 100 V hazard and mounting safety requirements.

Is this answer helpful?

A

The dimensions are 268 x 168 x 78 mm with a weight of 1 kg, making it compact for wall or ceiling mounts.

Is this answer helpful?

A

The system uses a 100 V output with a COM black wire acting as the reference point for the circuit connection.

Is this answer helpful?

A

Reduce the volume immediately to prevent damage. Check if the amplifier is overloading the speaker limits.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Versatile power taps allow selection between 3 W and 6 W RMS for different room acoustics.
  • Compact dimensions fit easily into various wall mounting locations without visual obstruction.
  • Standard 100 V operation ensures compatibility with most professional PA amplifier networks.
  • High sensitivity rating of 92 dB guarantees clear sound output at lower volume settings.
VS

Disadvantages

  • Restricted to indoor environments prevents use in outdoor or wet weather conditions safely.
  • Installation requires qualified electricians due to high voltage risks at the connection terminals.
  • User cannot open the housing for repairs as there are no serviceable parts inside.
  • Mounting surface must support five times the weight to prevent catastrophic failure from falling.
M: QW-35-FL

Product Specification

Principle

1-Way

Woofer

1x 5 in

Amplification

Passive

Frequency Range

150Hz-15kHz

Power Handling

6W RMS

Sensitivity

92dB

Dimensions

6.61 x 10.55 x 3.07 in (W x H x D)

Weight

2.23 lbs

M: QW-35-FL

Product Description

Introduction to the Omnitronic WC-4

Experience superior sound quality with the Omnitronic WC-4 Wall Speaker, designed specifically for indoor PA systems requiring reliable performance. This unit operates on a standard 100 Volt network, making it ideal for commercial and public address installations where distance and volume are priorities. Users should reference the Omnitronic WC-4 Manual to ensure proper setup and safety compliance during the installation process. The sleek design allows for seamless integration into office or commercial environments without obstructing space.

Installation requires careful planning, particularly regarding mounting surfaces. The speaker must be attached to a stable wall capable of supporting five times its weight to prevent accidental failure. Overhead mounting demands professional expertise due to the risks involved with gravity and electrical hazards. A qualified technician should handle the electrical connections to ensure the 100 V output matches the amplifier load correctly. Safety warnings emphasize keeping the device away from moisture and direct sunlight, as the casing is not weatherproof.

Operation is straightforward once the amplifier is engaged. Adjust the volume to avoid distortion, which indicates overload and potential damage to the driver. The speaker features selectable wattage taps, allowing users to choose between three or six watts RMS depending on the room size and acoustic needs. Sound clarity is maintained within a frequency range of 150 Hertz to 15 kHz, ensuring vocals and instrumentation remain distinct. Regular maintenance involves checking screws for tightness and cleaning the grille with a damp cloth. Health hazards associated with high sound pressure levels necessitate monitoring volume settings. Hearing protection or distance from the source is recommended for extended exposure scenarios. The device contains no user-serviceable parts, so any internal faults require professional service. This ensures longevity and adherence to warranty conditions provided by the manufacturer.

Following the guidelines ensures your system remains operational and safe for years. Whether for background music or voice announcements, the speaker delivers consistent audio output suitable for fixed installations. Always prioritize safety protocols to protect both equipment and personnel from electrical or structural risks. By adhering to the Omnitronic WC-4 Manual, technicians can maximize the longevity and efficiency of the audio system. Proper ventilation around the unit is crucial, requiring at least fifty centimeters of clear space to prevent overheating during continuous operation. Safety is paramount when dealing with high voltage systems. The device operates at 100 Volts, which presents a significant risk if installed incorrectly. Only licensed electricians should handle the wiring. Cleaning procedures are simple yet vital for maintaining performance. A soft, lint-free cloth dampened with water is sufficient to remove dust without damaging the finish. Harsh solvents or alcohol should never be used as they can degrade the plastic housing. Regular inspections of the mounting hardware are necessary to ensure screws have not loosened due to vibrations. Technical specifications highlight a sensitivity of 92 dB at one watt per meter, providing adequate gain for standard amplifiers. The frequency response spans from 150 Hz up to 15 kHz, covering the essential spectrum for speech clarity. Dimensions of 268 by 168 millimeters allow for discreet placement in ceilings or high walls. The weight of one kilogram is manageable for standard brackets. When purchasing, verify the article number 80710504 to ensure compatibility with your existing network infrastructure.

M: QW-35-FL

© Copyright 2026 Manual.ly